亚洲乱码中文字幕综合,中国熟女仑乱hd,亚洲精品乱拍国产一区二区三区,一本大道卡一卡二卡三乱码全集资源,又粗又黄又硬又爽的免费视频

Nginx啟動顯示80端口占用問題的解決方案

 更新時間:2024年04月29日 11:24:52   作者:SarPro  
這篇文章主要介紹了Nginx啟動顯示80端口占用問題的解決方案,文中通過代碼示例和圖文講解的非常詳細,對大家解決問題有一定的幫助,需要的朋友可以參考下

1. 問題描述

在啟動nginx服務的時候顯示內容如下:

sudo systemctl status nginx

問題出現原因:

根據日志顯示,Nginx 服務啟動失敗,主要原因是無法綁定到端口 80。這通常是由于該端口已被

其他進程占用而導致的。

2. 解決方案

要解決此問題,可以執行以下步驟:

確認端口 80 是否被其他進程占用。可以使用以下命令檢查:

sudo netstat -tuln | grep :80

該命令會列出正在監聽端口 80 的進程。如果有其他進程在使用該端口,顯示如下:

打開配置文件:可以將80端口【默認端口】修改為 8080 端口【當然也可以是其他的,不過要記得去防火墻添加規則(即添加端口)】

比如我添加的是 8080 端口,則添加規則如下(紅框內容):

可以使用以下命令打開配置文件:

sudo nano /etc/nginx/sites-available/*

我的配置文件內容如下【版本不同當然配置文件不同】:

##
# You should look at the following URL's in order to grasp a solid understanding
# of Nginx configuration files in order to fully unleash the power of Nginx.
# https://www.nginx.com/resources/wiki/start/
# https://www.nginx.com/resources/wiki/start/topics/tutorials/config_pitfalls/
# https://wiki.debian.org/Nginx/DirectoryStructure
#
# In most cases, administrators will remove this file from sites-enabled/ and
# leave it as reference inside of sites-available where it will continue to be
# updated by the nginx packaging team.
#
# This file will automatically load configuration files provided by other
# applications, such as Drupal or Wordpress. These applications will be made
# available underneath a path with that package name, such as /drupal8.
#
# Please see /usr/share/doc/nginx-doc/examples/ for more detailed examples.
##
# Default server configuration
#
server {
	listen 80 default_server;
	listen [::]:80 default_server;
	# SSL configuration
	#
	# listen 443 ssl default_server;
	# listen [::]:443 ssl default_server;
	#
	# Note: You should disable gzip for SSL traffic.
	# See: https://bugs.debian.org/773332
	#
	# Read up on ssl_ciphers to ensure a secure configuration.
	# See: https://bugs.debian.org/765782
	#
	# Self signed certs generated by the ssl-cert package
	# Don't use them in a production server!
	#
	# include snippets/snakeoil.conf;
 
	root /var/www/html;
 
	# Add index.php to the list if you are using PHP
	index index.html index.htm index.nginx-debian.html;
 
	server_name _;
 
	location / {
		# First attempt to serve request as file, then
		# as directory, then fall back to displaying a 404.
		try_files $uri $uri/ =404;
	}
 
	# pass PHP scripts to FastCGI server
	#
	#location ~ \.php$ {
	#	include snippets/fastcgi-php.conf;
	#
	#	# With php-fpm (or other unix sockets):
	#	fastcgi_pass unix:/run/php/php7.4-fpm.sock;
	#	# With php-cgi (or other tcp sockets):
	#	fastcgi_pass 127.0.0.1:9000;
	#}
 
	# deny access to .htaccess files, if Apache's document root
	# concurs with nginx's one
	#
	#location ~ /\.ht {
	#	deny all;
	#}
}
 
 
# Virtual Host configuration for example.com
#
# You can move that to a different file under sites-available/ and symlink that
# to sites-enabled/ to enable it.
#
#server {
#	listen 80;
#	listen [::]:80;
#
#	server_name example.com;
#
#	root /var/www/example.com;
#	index index.html;
#
#	location / {
#		try_files $uri $uri/ =404;
#	}
#}

將里面的代碼模塊

server {
    listen 80 default_server;
    listen [::]:80 default_server;

修改成

server {
    listen 8080 default_server;
    listen [::]:8080 default_server;

完成修改!【如果其他地方還有 80 的修改成 8080 即可】。

啟動Nginx服務

sudo systemctl start nginx

設置Nginx服務自啟動:

sudo systemctl enable nginx

驗證Nginx是否運行:

sudo systemctl status nginx

如果一切正常,輸出應該是“Active: active (running)”或者類似的信息。

以上就是Nginx啟動顯示80端口占用問題的解決方案的詳細內容,更多關于Nginx 80端口占用的資料請關注腳本之家其它相關文章!

相關文章

  • 訪問nginx顯示未找到站點的問題分析及解決方案

    訪問nginx顯示未找到站點的問題分析及解決方案

    當我們?cè)诎惭b好nginx準備訪問80端口時,突然出現您的請求在Web服務器中沒有找到對應的站點,所以本文給大家介紹了訪問nginx顯示未找到站點的問題分析及解決方案,需要的朋友可以參考下
    2024-03-03
  • 在nginx中實現單位時間內限制訪問頻率的教程

    在nginx中實現單位時間內限制訪問頻率的教程

    這篇文章主要介紹了在nginx中實現單位時間內限制訪問頻率的教程,并非針對IP而是全局的訪問量限制,需要的朋友可以參考下
    2015-04-04
  • 如何利用nginx通過正則攔截指定url請求詳解

    如何利用nginx通過正則攔截指定url請求詳解

    這篇文章主要介紹了如何利用nginx通過正則攔截指定url請求的相關資料,文中通過示例代碼介紹的非常詳細,對大家學習或者使用nginx具有一定的參考學習價值,需要的朋友們下面來一起學習學習吧
    2020-05-05
  • nginx+keepalived 高可用主從配置詳解

    nginx+keepalived 高可用主從配置詳解

    這篇文章主要介紹了nginx+keepalived 高可用主從配置詳解,小編覺得挺不錯的,現在分享給大家,也給大家做個參考。一起跟隨小編過來看看吧
    2018-06-06
  • nginx動態添加訪問白名單的方法

    nginx動態添加訪問白名單的方法

    本篇文章主要介紹了nginx動態添加訪問白名單的方法,小編覺得挺不錯的,現在分享給大家,也給大家做個參考。一起跟隨小編過來看看吧
    2017-02-02
  • Nginx可視化管理軟件(Nginx Proxy Manager)的使用

    Nginx可視化管理軟件(Nginx Proxy Manager)的使用

    Nginx Proxy Manager是一款開源的Nginx可視化管理界面,本文就來介紹一下Nginx Proxy Manager的使用,感興趣的可以了解一下
    2024-03-03
  • Nginx下支持Thinkphp URL Rewrite的配置示例

    Nginx下支持Thinkphp URL Rewrite的配置示例

    這篇文章主要介紹了Nginx下支持Thinkphp URL Rewrite的配置示例,本文直接給出配置示例,需要的朋友可以參考下
    2015-07-07
  • nginx 與后臺端口沖突的解決

    nginx 與后臺端口沖突的解決

    這篇文章主要介紹了nginx 與后臺端口沖突的解決,小編覺得挺不錯的,現在分享給大家,也給大家做個參考。一起跟隨小編過來看看吧
    2019-03-03
  • nginx配置支持https的示例代碼

    nginx配置支持https的示例代碼

    這篇文章主要介紹了nginx配置支持https的示例代碼,小編覺得挺不錯的,現在分享給大家,也給大家做個參考。一起跟隨小編過來看看吧
    2018-12-12
  • nginx 常用指令 try_files allow root alias的使用

    nginx 常用指令 try_files allow root ali

    本文主要介紹了nginx 常用指令 try_files allow root alias的使用,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧
    2024-08-08

最新評論