快捷導航

Java中串行接口調用優化方式

更新時間：2024年05月13日 09:23:40 作者：ZerahMu

這篇文章主要介紹了Java中串行接口調用優化方式,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教

Java串行接口調用優化

準備面試總結下

1.CompletableFuture

 static ThreadPoolExecutor poolExecutor = new ThreadPoolExecutor(10, 20, 1000L, TimeUnit.MICROSECONDS, new ArrayBlockingQueue<>(100));
 
    public static void main(String[] args) throws ExecutionException, InterruptedException {
        CompletableFuture<Integer> task1 = CompletableFuture.supplyAsync(() -> {
            try {
                System.out.println("task1");
                Thread.sleep(1000);
            } catch (InterruptedException e) {
                throw new RuntimeException(e);
            }
            return 1000;
        }, poolExecutor);
 
        CompletableFuture<Integer> task2 = CompletableFuture.supplyAsync(() -> {
            try {
                System.out.println("task2");
                Thread.sleep(2000);
            } catch (InterruptedException e) {
                throw new RuntimeException(e);
            }
            return 2000;
        }, poolExecutor);
 
 
        CompletableFuture<Integer> task3 = CompletableFuture.supplyAsync(() -> {
            try {
                System.out.println("task3");
                Thread.sleep(10000);
            } catch (InterruptedException e) {
                throw new RuntimeException(e);
            }
            return 5000;
        }, poolExecutor);
        Integer result1 = task1.get();
        System.out.println(result1);
        Integer result2 = task2.get();
        System.out.println(result2);
        Integer result3 = task3.get();
        System.out.println(result3);
        CompletableFuture<Void> voidCompletableFuture = CompletableFuture.allOf(task1, task2, task3);
        poolExecutor.shutdown();
        System.out.println("執行完畢");
 
    }

2.CoutDownLatch

static HashMap<String, Integer> map = new HashMap<String, Integer>();
 
    public static void main(String[] args) throws InterruptedException, ExecutionException {
        ThreadPoolExecutor poolExecutor = new ThreadPoolExecutor(10, 20, 1000L, TimeUnit.MICROSECONDS, new ArrayBlockingQueue<>(100));
        CountDownLatch countDownLatch = new CountDownLatch(3);
 
 
        Future<Integer> task1 = poolExecutor.submit(new Callable<Integer>() {
            @Override
            public Integer call() throws Exception {
                System.out.println("任務1");
                Thread.sleep(1000);
                System.out.println("任務1結束");
                countDownLatch.countDown();
                return 1000;
            }
        });
 
        Future<Integer> task2 = poolExecutor.submit(new Callable<Integer>() {
            @Override
            public Integer call() throws Exception {
                System.out.println("任務2");
                Thread.sleep(500);
                System.out.println("任務2結束");
                countDownLatch.countDown();
                return 500;
            }
        });
 
        Future<Integer> task3 = poolExecutor.submit(new Callable<Integer>() {
            @Override
            public Integer call() throws Exception {
                System.out.println("任務3");
                Thread.sleep(2000);
                System.out.println("任務3結束");
                countDownLatch.countDown();
                return 2000;
            }
        });
        map.put("task1", task1.get());
        map.put("task2", task1.get());
        map.put("task3", task1.get());
 
 
        System.out.println("線程跑完了");
        countDownLatch.await();
        System.out.println("---------------任務執行結束-------------");
        poolExecutor.shutdown();
 
    }

3.阻塞獲取異步調用結果

   public static void main(String[] args) throws ExecutionException, InterruptedException {
        ExecutorService executorService = Executors.newFixedThreadPool(3);
        Future<String> submit = executorService.submit(new Callable<String>() {
            @Override
            public String call() throws Exception {
                Thread.sleep(1000);
                return "Its done";
            }
        });
        while (true){
            if (submit.isDone()){
                System.out.println(submit.get());
                break;
            }
            System.out.println(submit.isDone());
 
        }
    }

4.除了上面兩個方法還有 CyclicBarrier，Semaphore也都可以實現，可以自己嘗試下

Java串口程序的調用

RXTX串口插件的使用方法（windows平臺）

1、把rxtxParallel.dll、rxtxSerial.dll拷貝到：C:\WINDOWS\system32下。

2、如果是在開發的時候(JDK),需要把RXTXcomm.jar、rxtxParallel.dll、rxtxSerial.dll拷貝到…\jre…\lib\ext下；如：D:\Program Files\Java\jre1.6.0_02\lib\ext

3、需要選中項目右鍵->Preperties->Java Build Path->Libraries->選擇External Folder–>選擇RXTXcomm.jar.

拷貝 RXTXcomm.jar 到 <JAVA_HOME>\jre\lib\ext目錄中；
拷貝 rxtxSerial.dll 到 <JAVA_HOME>\jre\bin目錄中；
拷貝 rxtxParallel.dll 到 <JAVA_HOME>\jre\bin目錄中；

其中<JAVA_HOME>為jdk安裝路徑

下面是一些程序運行測試寫的方法

package com.serialport;

import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.Date;
import java.util.Enumeration;
import java.util.HashSet;
import java.util.TooManyListenersException;
import java.util.concurrent.BlockingQueue;
import java.util.concurrent.LinkedBlockingQueue;

import com.readtable.HexTest;

import gnu.io.CommPort;
import gnu.io.CommPortIdentifier;
import gnu.io.PortInUseException;
import gnu.io.SerialPort;
import gnu.io.SerialPortEvent;
import gnu.io.SerialPortEventListener;
import gnu.io.UnsupportedCommOperationException;

/**
 * 這個是一個更加完善的串口調用及接收函數類
 * @author Administrator
 *
 */
public class SerialReceiver extends Thread implements SerialPortEventListener{
  HexTest hexT2 = new HexTest();
  
  
  	 
  static CommPortIdentifier portId; // 串口通信管理類
  static Enumeration<?> portList; // 有效連接上的端口的枚舉
  static InputStream inputStream; //從串口來數據的輸入流
  static OutputStream outputStream;// 向串口輸出的流
  static SerialPort serialPort; // 串口的引用
  
  private static byte[] readBuffer = new byte[1024]; // 4k的buffer空間,緩存串口讀入的數據 
  int numBytes;  //buffer中的實際數據字節數 ，每一次讀取的字節數據 
  // 堵塞隊列用來存放讀到的數據
  private BlockingQueue<String> msgQueue = new LinkedBlockingQueue<String>();

 
  //其他的常量設置
  //端口是否打開了  
  boolean isOpen = false;  
  // 端口讀入數據事件觸發后,等待n毫秒后再讀取,以便讓數據一次性讀完  
  public static int PARAMS_DELAY = 1000; // 延時等待端口數據準備的時間  
  public static int PARAMS_TIMEOUT = 2000; // 超時時間  
  public static String PARAMS_PORT = "COM4"; // 端口名稱  
  public static int PARAMS_RATE = 2400; // 波特率  
  public static int PARAMS_DATABITS = 8; // 數據位  
  public static int PARAMS_STOPBITS = 1; // 停止位  
  public static int PARAMS_PARITY = 1; // 奇偶校驗  
  

  /**
   * SerialPort EventListene 的方法,持續監聽端口上是否有數據流
   */
	@Override
	public void serialEvent(SerialPortEvent event) {
		// TODO Auto-generated method stub
		switch (event.getEventType()) {
        case SerialPortEvent.DATA_AVAILABLE:// 當有可用數據時讀取數據
    	  receTest();     
          break;
      }
	}
	
	/**
	 * 接收的數據進行打印測試
	 */
	private void receTest() {

	    try {
              numBytes = 0;
              while (inputStream.available() > 0) {            	 
                  numBytes += inputStream.read(readBuffer,numBytes,1024);
              }

                if (numBytes > 0) {
                    msgQueue.add(new Date() +"方法2接收的字節數為："+numBytes+ "   收到的數據為：-----"
                    		+ hexT2.arrayToHexStr(readBuffer, 0, numBytes));
                    readBuffer = new byte[1024];  //重新構造緩沖對象，否則有可能會影響接下來接收的數據
                } else {
                    msgQueue.add("額------沒有讀到數據");
                }
            
        } catch (IOException e) {
        	
        }
	
	}
	
	
	
	/**
	 * 根據串口名，獲取串口接口
	 * @param portName
	 * @return
	 */
	public SerialPort OpenSerialPort(String portName) {
		 //獲取設備上的所有端口
	      portList = CommPortIdentifier.getPortIdentifiers();

	      while (portList.hasMoreElements()) {
	          // 獲取相應串口對象
	          portId = (CommPortIdentifier) portList.nextElement();
	          
	          System.out.println("設備類型：--->" + portId.getPortType());
	          System.out.println("設備名稱：--->" + portId.getName());
	          
	          //判斷端口類型是否為串口
	          if (portId.getPortType() == CommPortIdentifier.PORT_SERIAL) {

	              // 判斷如果輸入的串口名對應的串口存在，就打開該串口
	              if (portId.getName().equals(portName)) {
	                  try {
	                      // 打開串口名字為COM_4(名字任意),延遲為2毫秒
	                      serialPort = (SerialPort) portId.open("COM_3", 2000);
                          return serialPort;
	                  } catch (PortInUseException e) {
	                      e.printStackTrace();
	                      return null;
	                  }
	                  
	              }
	          
	          }
	       }
	      return null;
	      
	}
	
	/**
	 * 打開串口的函數
	 * @param portName  串口名
	 * @param bitrate   波特率
	 * @param databit   數據位
	 * @param stopbit   停止位
	 * @param parity    校驗方式：奇 偶 無
	 * @return
	 */
	public int OpenComport(String portName,int bitrate,int databit,int stopbit,int parity) {
		serialPort = OpenSerialPort(portName);
		if(serialPort != null) {
			// 設置當前串口的輸入輸出流
            try {
                inputStream = serialPort.getInputStream();
                outputStream = serialPort.getOutputStream();
            } catch (IOException e) {
                e.printStackTrace();
                return 0;
            }
            // 給當前串口添加一個監聽器
            try {
                serialPort.addEventListener(this);
            } catch (TooManyListenersException e) {
                e.printStackTrace();
                return 0;
            }
            // 設置監聽器生效，即：當有數據時通知
            serialPort.notifyOnDataAvailable(true);
            
            //給串口設置一些參數
            try {
                // 比特率、數據位、停止位、奇偶校驗位
                serialPort.setSerialPortParams( bitrate,databit,stopbit,parity);
            } catch (UnsupportedCommOperationException e) {
                e.printStackTrace();
                return 0;
            }

            return 1;
		}
		
		return 0;
	}
	

	
	@Override
	public void run() {
		// TODO Auto-generated method stub
		 try {
	            System.out.println("--------------任務處理線程運行了--------------");
	            while (true) {
	                //如果堵塞隊列中存在數據就將其輸出
	                if (msgQueue.size() > 0) {
	                    System.out.println(msgQueue.take());
	                }
	            }
	        } catch (InterruptedException e) {
	            // TODO Auto-generated catch block
	            e.printStackTrace();
	        }
	}
	
	 public static void main(String[] args) {
		 
		    SerialReceiver cRead = new SerialReceiver();
		    
		    PARAMS_PORT = "COM3"; // 端口名稱  
		    PARAMS_RATE = 2400; // 波特率  
		    PARAMS_DATABITS = SerialPort.DATABITS_8;  //數據位
		    PARAMS_STOPBITS = SerialPort.STOPBITS_1; // 停止位             
		    PARAMS_PARITY =  SerialPort.PARITY_EVEN; // 奇偶校驗
		    
	        int i = cRead.OpenComport(PARAMS_PORT,PARAMS_RATE,PARAMS_DATABITS,
	        		                  PARAMS_STOPBITS,PARAMS_PARITY);
	        if (i == 1) {
	            // 啟動線程來處理收到的數據
	        	 cRead.start();
	            try {
	            	
	            	//發送指令
	            	HexTest hexT = new HexTest();
	        		byte[] bst = hexT.ReadTable07(1,1, 0,3);
	            	outputStream.write(bst, 0,bst.length);

	            } catch (IOException e) {
	                // TODO Auto-generated catch block
	                e.printStackTrace();
	            }
	        } else {
	            return;
	        }
	        
	 }	


}