Go 如何使用原始套接字捕獲網卡流量

更新時間：2024年07月04日 10:07:23 作者：文一路挖坑俠

為了減少對環境的依賴可以使用原始套接字捕獲網卡流量,然后使用?gopacket?的協議解析功能,這樣就省去了解析這部分的工作量,正確性也可以得到保證,同時 CGO 也可以關閉,這篇文章主要介紹了Go 使用原始套接字捕獲網卡流量,需要的朋友可以參考下

// Both openRawSock and htons are available in
// https://github.com/cilium/ebpf/blob/master/example_sock_elf_test.go.
// MIT license.
func OpenRawSocket(index int) (int, error) {
	sock, err := syscall.Socket(syscall.AF_PACKET, syscall.SOCK_RAW|syscall.SOCK_NONBLOCK|syscall.SOCK_CLOEXEC, int(htons(syscall.ETH_P_ALL)))
	if err != nil {
		return 0, err
	}
	sll := syscall.SockaddrLinklayer{Ifindex: index, Protocol: htons(syscall.ETH_P_ALL)}
	if err := syscall.Bind(sock, &sll); err != nil {
		syscall.Close(sock)
		return 0, err
	}
	return sock, nil
}
// htons converts the unsigned short integer hostshort from host byte order to network byte order.
func htons(i uint16) uint16 {
	b := make([]byte, 2)
	binary.BigEndian.PutUint16(b, i)
	return *(*uint16)(unsafe.Pointer(&b[0]))
}

但是這個示例有一個問題，只能拿到本機流量。

捕獲經過網橋的非本機流量

通過 tcpdump 是可以抓到經過網橋的轉發流量的，我們使用 strace 對 tcpdump 進行跟蹤分析

root@localhost:~# strace -f tcpdump -i b_2_0 arp -nne
...
socket(AF_PACKET, SOCK_RAW, htons(0 /* ETH_P_??? */)) = 4
ioctl(4, SIOCGIFINDEX, {ifr_name="lo", ifr_ifindex=1}) = 0
ioctl(4, SIOCGIFHWADDR, {ifr_name="b_2_0", ifr_hwaddr={sa_family=ARPHRD_ETHER, sa_data=4e:59:d6:32:f6:42}}) = 0
newfstatat(AT_FDCWD, "/sys/class/net/b_2_0/wireless", 0x7ffdf063bc50, 0) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/sys/class/net/b_2_0/dsa/tagging", O_RDONLY) = -1 ENOENT (No such file or directory)
ioctl(4, SIOCGIFINDEX, {ifr_name="b_2_0", ifr_ifindex=6053}) = 0
bind(4, {sa_family=AF_PACKET, sll_protocol=htons(0 /* ETH_P_??? */), sll_ifindex=if_nametoindex("b_2_0"), sll_hatype=ARPHRD_NETROM, sll_pkttype=PACKET_HOST, sll_halen=0}, 20) = 0
getsockopt(4, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
setsockopt(4, SOL_PACKET, PACKET_ADD_MEMBERSHIP, {mr_ifindex=if_nametoindex("b_2_0"), mr_type=PACKET_MR_PROMISC, mr_alen=0, mr_address=4e:59:d6:32:f6:42}, 16) = 0
getsockopt(4, SOL_SOCKET, SO_BPF_EXTENSIONS, [64], [4]) = 0
mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fec47cbe000

看到有一個 setsockopt(PACKET_MR_PROMISC) 設置，看起來是開啟的混雜模式，查看資料看到這是一個針對套接字級別的混雜模式。

由于之前看過 suricata 的代碼，看看它是怎么做的，直接在 suricata 的倉庫里面搜索 PACKET_MR_PROMISC 關鍵字，出現代碼

memset(&sock_params, 0, sizeof(sock_params));
sock_params.mr_type = PACKET_MR_PROMISC;
sock_params.mr_ifindex = bind_address.sll_ifindex;
r = setsockopt(ptv->socket, SOL_PACKET, PACKET_ADD_MEMBERSHIP,(void *)&sock_params, sizeof(sock_params));
if (r < 0) {
    SCLogError("%s: failed to set promisc mode: %s", devname, strerror(errno));
    goto socket_err;
}

套接字設置混雜模式的 Go 實現如下

// Set socket level PROMISC mode
err = unix.SetsockoptPacketMreq(sock, syscall.SOL_PACKET, syscall.PACKET_ADD_MEMBERSHIP, &unix.PacketMreq{Type: unix.PACKET_MR_PROMISC, Ifindex: int32(index)})
if err != nil {
	syscall.Close(sock)
	return 0, err
}

捕獲 VLAN 流量

目前只能拿到普通的以太網流量，如果還需要拿到 VLAN Id 的話，需要設置 PACKET_AUXDATA，參考 man packet

PACKET_AUXDATA (since Linux 2.6.21)
    If this binary option is enabled, the packet socket passes
    a metadata structure along with each packet in the
    recvmsg(2) control field.  The structure can be read with
    cmsg(3).  It is defined as
       struct tpacket_auxdata {
           __u32 tp_status;
           __u32 tp_len;      /* packet length */
           __u32 tp_snaplen;  /* captured length */
           __u16 tp_mac;
           __u16 tp_net;
           __u16 tp_vlan_tci;
           __u16 tp_vlan_tpid; /* Since Linux 3.14; earlier, these
                                  were unused padding bytes */
       };

Go 的實現如下

// Enable PACKET_AUXDATA option for VLAN
if err := syscall.SetsockoptInt(sock, syscall.SOL_PACKET, unix.PACKET_AUXDATA, 1); err != nil {
	syscall.Close(sock)
	return 0, err
}

完整的 OpenRawSocket 實現

完整的實現如下

func OpenRawSocket(index int) (int, error) {
	sock, err := syscall.Socket(syscall.AF_PACKET, syscall.SOCK_RAW|syscall.SOCK_NONBLOCK|syscall.SOCK_CLOEXEC, int(htons(syscall.ETH_P_ALL)))
	if err != nil {
		return 0, err
	}
	// Enable PACKET_AUXDATA option for VLAN
	if err := syscall.SetsockoptInt(sock, syscall.SOL_PACKET, unix.PACKET_AUXDATA, 1); err != nil {
		syscall.Close(sock)
		return 0, err
	}
	// Set socket level PROMISC mode
	err = unix.SetsockoptPacketMreq(sock, syscall.SOL_PACKET, syscall.PACKET_ADD_MEMBERSHIP, &unix.PacketMreq{Type: unix.PACKET_MR_PROMISC, Ifindex: int32(index)})
	if err != nil {
		syscall.Close(sock)
		return 0, err
	}
	sll := syscall.SockaddrLinklayer{Ifindex: index, Protocol: htons(syscall.ETH_P_ALL)}
	if err := syscall.Bind(sock, &sll); err != nil {
		syscall.Close(sock)
		return 0, err
	}
	return sock, nil
}

從 fd 中讀取數據

這里使用 select(2) 簡單地對 fd 進行監聽，使用 recvmsg(2) 來讀取數據，包括 VLAN tag。

實現如下

package pcap
import (
	"context"
	"syscall"
)
func FD_SET(fd int, p *syscall.FdSet) {	p.Bits[fd/64] |= 1 << (uint(fd) % 64) }
func FD_CLR(fd int, p *syscall.FdSet) {	p.Bits[fd/64] &^= 1 << (uint(fd) % 64) }
func FD_ISSET(fd int, p *syscall.FdSet) bool {	return p.Bits[fd/64]&(1<<(uint(fd)%64)) != 0 }
func FD_ZERO(p *syscall.FdSet) {
	for i := range p.Bits {
		p.Bits[i] = 0
	}
}
type RecvmsgHandler func(buf []byte, n int, oob []byte, oobn int, err error) error
func RecvmsgLoop(ctx context.Context, sockfd int, fn RecvmsgHandler) error {
	buf := make([]byte, 1024*64)
	oob := make([]byte, syscall.CmsgSpace(1024))
	readfds := syscall.FdSet{}
	for {
		select {
		case <-ctx.Done():
			return ctx.Err()
		default:
		}
		FD_ZERO(&readfds)
		FD_SET(sockfd, &readfds)
		tv := syscall.Timeval{Sec: 0, Usec: 100000} // 100ms
		nfds, err := syscall.Select(sockfd+1, &readfds, nil, nil, &tv)
		if err != nil {
			continue
		}
		if nfds > 0 && FD_ISSET(sockfd, &readfds) {
			n, oobn, _, _, err := syscall.Recvmsg(sockfd, buf, oob, 0)
			err = fn(buf, n, oob, oobn, err)
			if err != nil {
				return err
			}
		}
	}
}

VLAN 數據的解析邏輯如下

func decodeVlanIdByAuxData(oob []byte) (uint16, error) {
	msgs, err := syscall.ParseSocketControlMessage(oob)
	if err != nil {
		return 0, err
	}
	for _, m := range msgs {
		if m.Header.Level == syscall.SOL_PACKET && m.Header.Type == 8 && len(m.Data) >= 20 {
			auxdata := unix.TpacketAuxdata{
				Status:   binary.LittleEndian.Uint32(m.Data[0:4]),
				Vlan_tci: binary.LittleEndian.Uint16(m.Data[16:18]),
			}
			if auxdata.Status&unix.TP_STATUS_VLAN_VALID != 0 {
				return auxdata.Vlan_tci, nil
			}
		}
	}
	return 0, nil
}