Vue如何實現數據的上移和下移
更新時間:2024年06月07日 17:05:38 作者:小林犟
這篇文章主要介紹了Vue如何實現數據的上移和下移問題,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教
Vue實現數據的上移和下移
場景
點擊上移
或下移
按鈕進行列表移動,第一行
則不能上移
,最后一行
則不能下移
解決方案
<el-button @click="moveUp(index)">上移</el-button> <el-button @click="moveDown(index)">下移</el-button> data() { return { list: [ { id: 1, name: '張三' }, { id: 2, name: '李四' }, { id: 3, name: '王五' } ] } } // 上移 moveUp (index) { const arr = this.list arr.splice(index - 1, 1, ...arr.splice(index, 1, arr[index - 1])) }, // 下移 moveDown (index) { const arr = this.list arr.splice(index, 1, ...arr.splice(index + 1, 1, arr[index])) },
禁用上下移邏輯
- 禁用上移:
:disabled="index === 0"
- 禁用下移:
:disabled="index === list.length - 1"
Vue表單批量上移 下移
效果圖
// 上移 handDmoveUp () { //選中行數據 let arrChecked = this.$refs.ref_ri_table.getCheckboxRecords(); //表格數據 let arr = this.tableData; //正序遍歷,保證移動完成的數據在下一次循環時位置不會再變動 a: for (let index1 = 0; index1 < arrChecked.length; index1++) { b: for (let index2 = 0; index2 < arr.length; index2++) { //選中數據定位到其在總數據中的位置時開始上移 if (arrChecked[index1] === arr[index2]) { //選中數據與總數據索引相同時,說明已經上移到最上層,結束這層 //循環 if (index1 === index2) { break b; } //上移一位到達上一條數據的上方 arr.splice(index2 - 1, 0, arr[index2]); //刪除原數據 arr.splice(index2 + 1, 1); //上移完成結束內存循環,開始移動下一條選中數據 break b; } } } }, //下移 handMoveDown () { let arrChecked = this.$refs.ref_ri_table.getCheckboxRecords(); let arr = this.tableData; a: for (let index1 = arrChecked.length - 1; index1 >= 0; index1--) { b: for (let index2 = arr.length - 1; index2 >= 0; index2--) { if (arrChecked[index1] === arr[index2]) { //選中數據索引+表格數組長度-選中數組長度=選中數據索引,代表以及下移到最底部,結束下移 if (index1 + arr.length - arrChecked.length === index2) { break b; } arr.splice(index2 + 2, 0, arr[index2]); arr.splice(index2, 1); break b; } } } },
總結
以上為個人經驗,希望能給大家一個參考,也希望大家多多支持腳本之家。
相關文章
Vue 3自定義指令開發的相關總結
這篇文章主要介紹了Vue 3自定義指令開發的相關總結,幫助大家更好的理解和使用vue框架,感興趣的朋友可以了解下2021-01-01vue 行為驗證碼之滑動驗證AJ-Captcha使用詳解
這篇文章主要介紹了vue 行為驗證碼之滑動驗證AJ-Captcha使用詳解,AJ-Captcha不需要npm安裝,只需要將組件 verifition復制到所使用的components目錄下,本文給大家詳細講解,需要的朋友可以參考下2023-05-05vue 中常用操作數組的方法(forEach()和reduce())
文章介紹了JavaScript中常用的操作數組方法,包括forEach()和reduce(),forEach()用于遍歷數組并對每個元素執行操作,而reduce()則用于遍歷數組并進行累加等迭代操作,感興趣的朋友一起看看吧2025-03-03vue-mugen-scroll組件實現pc端滾動刷新
這篇文章主要為大家詳細介紹了vue-mugen-scroll組件實現pc端滾動刷新,具有一定的參考價值,感興趣的小伙伴們可以參考一下2019-08-08vue3頁面跳轉傳值時獲取不到params值的問題解決
在Vue3頁面跳轉時傳遞和獲取參數通常通過路由參數和查詢字符串實現,本文主要介紹了vue3頁面跳轉傳值時獲取不到params值的問題解決,感興趣的可以了解一下2024-11-11