/// <summary>
/// 客戶端
/// </summary>
class UDPSender
{
  static void Main(string[] args)
  {
    //創建一個UdpClient對象，0表示系統自動分配發送端口
    //(若同時在本機運行服務端和客戶端，則服務端接收和客戶端發送需要使用不同端口，否則兩個程序使用同一端口將引發沖突)
    UdpClient udpSender = new UdpClient(0);
    //連接到服務端并指定接收端口
    udpSender.Connect("localhost", 11000);
    //連接到子網廣播地址并指定接收端口
    //udpSender.Connect("192.168.1.255", 11000);
    //(在使用TCP/IP協議的網絡中，主機標識段全為1的IP地址為廣播地址，廣播地址傳送給主機標識段所涉及的所有計算機。
    //例如，對于192.168.1.0(255.255.255.0)網段，其廣播地址為192.168.1.255(255的2進制即為11111111)，
    //當發出目的地址為192.168.1.255時，它將分發給該網段上的所有計算機。)
    //把消息轉換成字節流發送到服務端
    byte[] sendBytes = Encoding.ASCII.GetBytes("Is anybody there?");
    udpSender.Send(sendBytes, sendBytes.Length);
    //關閉鏈接
    udpSender.Close();
  }
}

/// <summary>
/// 服務端
/// </summary>
class UDPReceive
{
  static void Main(string[] args)
  {
    //創建一個UdpClient對象，11000為接收端口
    UdpClient udpReceive = new UdpClient(11000);
    //設置遠程主機，(IPAddress.Any, 0)代表接收所有IP所有端口發送的數據
    IPEndPoint remoteIpEndPoint = new IPEndPoint(IPAddress.Any, 0);//或 IPEndPoint remoteIpEndPoint = null;
    //監聽數據，接收到數據后，把數據轉換成字符串并輸出
    byte[] receiveBytes = udpReceive.Receive(ref remoteIpEndPoint);
    string returnData = Encoding.ASCII.GetString(receiveBytes);
    Console.WriteLine("This is the message you received " + returnData.ToString());
    Console.WriteLine("This message was sent from " + remoteIpEndPoint.Address.ToString() + " on their port number " + remoteIpEndPoint.Port.ToString()); 
    //關閉連接
    udpReceive.Close();
  }
}

/// <summary>
/// 多路廣播組客戶端
/// </summary>
class MulticastGroupClient
{
  static void Main(string[] args)
  {
    //創建一個UdpClient對象，0表示系統自動分配發送端口
    var client = new UdpClient(0);
    //將廣播地址添加到多路廣播組，生存期(路由器跳數)為10
    var ip = IPAddress.Parse("234.56.78.90");
    client.JoinMulticastGroup(ip, 10);
    //定義終結點(服務端IP和接收端口)，把消息轉換成字節流后發送到服務端
    var multicast = new IPEndPoint(ip, 7788);
    byte[] bytes = Encoding.ASCII.GetBytes("Hello from multicast.");
    client.Send(bytes, bytes.Length, multicast);
  }
}

/// <summary>
/// 多路廣播組服務端
/// </summary>
class MulticastGroupServer
{
  static void Main(string[] args)
  {
    //創建一個UdpClient對象，7788為接收端口
    var client = new UdpClient(7788);
    //將廣播地址添加到多路廣播組，生存期(路由器跳數)為10
    var ip = IPAddress.Parse("234.56.78.90");
    client.JoinMulticastGroup(ip, 10);
    //設置遠程主機，(IPAddress.Any, 0)代表接收所有IP所有端口發送的數據
    var multicast = new IPEndPoint(IPAddress.Any, 0);//或 IPEndPoint multicast = null;
    //監聽數據，接收到數據后，把數據轉換成字符串并輸出
    byte[] bytes = client.Receive(ref multicast);
    string msg = Encoding.ASCII.GetString(bytes);
    Console.WriteLine(msg);
  }
}