Linux下實現定時器Timer的幾種方法總結
定時器Timer應用場景非常廣泛,在Linux下,有以下幾種方法:
1,使用sleep()和usleep()
其中sleep精度是1秒,usleep精度是1微妙,具體代碼就不寫了。使用這種方法缺點比較明顯,在Linux系統中,sleep類函數不能保證精度,尤其在系統負載比較大時,sleep一般都會有超時現象。
2,使用信號量SIGALRM + alarm()
這種方式的精度能達到1秒,其中利用了*nix系統的信號量機制,首先注冊信號量SIGALRM處理函數,調用alarm(),設置定時長度,代碼如下:
#include <stdio.h> #include <signal.h> void timer(int sig) { if(SIGALRM == sig) { printf("timer\n"); alarm(1); //we contimue set the timer } return ; } int main() { signal(SIGALRM, timer); //relate the signal and function alarm(1); //trigger the timer getchar(); return 0; }
alarm方式雖然很好,但是無法首先低于1秒的精度。
3,使用RTC機制
RTC機制利用系統硬件提供的Real Time Clock機制,通過讀取RTC硬件/dev/rtc,通過ioctl()設置RTC頻率,代碼如下:
#include <stdio.h> #include <linux/rtc.h> #include <sys/ioctl.h> #include <sys/time.h> #include <sys/types.h> #include <fcntl.h> #include <unistd.h> #include <errno.h> #include <stdlib.h> int main(int argc, char* argv[]) { unsigned long i = 0; unsigned long data = 0; int retval = 0; int fd = open ("/dev/rtc", O_RDONLY); if(fd < 0) { perror("open"); exit(errno); } /*Set the freq as 4Hz*/ if(ioctl(fd, RTC_IRQP_SET, 1) < 0) { perror("ioctl(RTC_IRQP_SET)"); close(fd); exit(errno); } /* Enable periodic interrupts */ if(ioctl(fd, RTC_PIE_ON, 0) < 0) { perror("ioctl(RTC_PIE_ON)"); close(fd); exit(errno); } for(i = 0; i < 100; i++) { if(read(fd, &data, sizeof(unsigned long)) < 0) { perror("read"); close(fd); exit(errno); } printf("timer\n"); } /* Disable periodic interrupts */ ioctl(fd, RTC_PIE_OFF, 0); close(fd); return 0; }
這種方式比較方便,利用了系統硬件提供的RTC,精度可調,而且非常高。
4,使用select()
這種方法在看APUE神書時候看到的,方法比較冷門,通過使用select(),來設置定時器;原理利用select()方法的第5個參數,第一個參數設置為0,三個文件描述符集都設置為NULL,第5個參數為時間結構體,代碼如下:
#include <sys/time.h> #include <sys/select.h> #include <time.h> #include <stdio.h> /*seconds: the seconds; mseconds: the micro seconds*/ void setTimer(int seconds, int mseconds) { struct timeval temp; temp.tv_sec = seconds; temp.tv_usec = mseconds; select(0, NULL, NULL, NULL, &temp); printf("timer\n"); return ; } int main() { int i; for(i = 0 ; i < 100; i++) setTimer(1, 0); return 0; }
這種方法精度能夠達到微妙級別,網上有很多基于select()的多線程定時器,說明select()穩定性還是非常好。
總結:如果對系統要求比較低,可以考慮使用簡單的sleep(),畢竟一行代碼就能解決;如果系統對精度要求比較高,則可以考慮RTC機制和select()機制。
以上就是小編為大家?guī)淼腖inux下實現定時器Timer的幾種方法總結全部內容了,希望大家多多支持腳本之家~
相關文章
Linux Apache+Proftpd構建虛擬主機時要注意的幾個安全問題
Linux下Apache+Proftpd構建虛擬主機時要注意的幾個安全問題,大家可以參考下,有其它未完整的地方,大家可以補充下。2009-08-08Apache運行模式之standalone和inetd模式介紹
這篇文章主要介紹了Apache運行模式之standalone和inetd模式介紹,本文講解了ServerType這個配置參數,ServerType這個配置選項指定如何運行Apache,需要的朋友可以參考下2015-06-06Windows系統下Apache服務器無法啟動的問題解決
這篇文章主要介紹了Windows系統下Apache服務器無法啟動的問題解決,大多數情況下還是端口被占用的問題,需要的朋友可以參考下2015-07-07禁止網站顯示文件目錄列表的2個方法(htaccess)
這篇文章主要介紹了禁止網站顯示文件目錄列表的2個方法,需要的朋友可以參考下2016-04-04