在ASP.NET 2.0中操作數據之六十五:在TableAdapters中創建新的存儲過程
導言:
本教程的Data Access Layer (DAL)使用的是類型化的數據集(Typed DataSets).就像我們在第一章《創建一個數據訪問層》里探討的一樣,該類型化的數據集由強類型的DataTable和TableAdapter構成。DataTable描繪的是系統里的邏輯實體而TableAdapter引用相關數據庫執行數據訪問,包括對DataTable填充數據、執行返回標量數據(scalar data)的請求、添加,更新,刪除數據庫里的記錄等.
TableAdapter執行的SQL命令要么是某個特定的SQL statements,比如SELECT columnList FROM TableName;要么是存儲過程.本教程前面部分的TableAdapter使用的是SQL statements.不過很多開發者和數據庫管理員基于安全、便于維護等方面的考慮,偏愛使用存儲過程;不過也有的人出于靈活性的考慮偏愛使用SQL statement.就我自己而言,我也偏向于存儲過程.在前面的文章,出于簡化的目的我選用的是SQL statements.
當定義一個新TableAdapter或添加新方法時,使用TableAdapter的設置向?qū)?,我們可以很容易的?chuàng)建新的或使用現有的存儲過程.在本文,我們將考察如何使用設置向?qū)ё詣拥纳a(chǎn)存儲過程。在下一章我們考察如何設置TableAdapter的方法使用現有的或手動創建存儲過程.
注意:關于討論到底使用存儲過程還是使用SQL statements的問題,可參考Rob Howard的博客文章《Don't Use Stored Procedures Yet?》(http://weblogs.asp.net/rhoward/archive/2003/11/17/38095.aspx)和Frans Bouma的博客文章《Stored Procedures are Bad, M'Kay?》(http://weblogs.asp.net/fboue/2003/11/18/38178.aspx)
存儲過程基礎
一個存儲過程由一系列的T-SQL statement組成,當調用該存儲過程時就執行這些T-SQL statement.存儲過程可以接受0到多個輸入?yún)?shù),返回標量值、輸出參數,或最常見的返回SELECT查詢值.
注意:存儲過程Stored procedures也經常引用為“sprocs” or “SPs”.
可以使用T-SQL statement語句CREATE PROCEDURE來創建存儲過程.比如下面的T-SQL腳本創建了一個名為GetProductsByCategoryID的存儲過程,它有一個名為 @CategoryID的參數,并且將表Products里與CategoryID值相吻合的那條記錄的ProductID, ProductName, UnitPrice,以及Discontinued值返回.
CREATE PROCEDURE GetProductsByCategoryID ( @CategoryID int ) AS SELECT ProductID, ProductName, UnitPrice, Discontinued FROM Products WHERE CategoryID = @CategoryID
創建后,我們可以用下面的代碼調用它:
EXEC GetProductsByCategory categoryID
注意:在下篇文章我們將在Visual Studio IDE集成環境里創建存儲過程.不過在本文,我們將用TableAdapter向?qū)碜詣觿?chuàng)建存儲過程.
除了返回數據外,我們還可以在一個事務里用存儲過程執行多條數據庫命令.比如,假如有一個名為DeleteCategory的存儲過程,其包含一個輸入?yún)?shù)@CategoryID,并執行2個DELETE statemets,第一個是刪除相關的products,第二個是刪除category。存儲過程里面的多個statements并不是自動的封裝在一個事務里的.我們應添加額外的T-SQL commands以確保存儲過程里的多條數據庫命令當成原子操作處理.我們將在后面的內容考察如何用事務來封裝存儲過程的命令.
當在體系的某個層使用存儲過程時,Data Access Layer的方法將調用某個具體的存儲過程而不是發出一個SQL statement命令.這樣一來我們可以發現、分析發出的查詢命令.并可以更清楚的看到數據庫是如何使用的.有關存儲過程基本原理的更多信息,可參考本文結束部分的延伸閱讀.
第一步:創建數據訪問層高級場景的Web頁面
在開始之前,讓我們花點時間創建本文及后面幾篇文章要用到的頁面。新建一個名為AdvancedDAL的文件夾,然后添加如下的ASP.NET頁面,記得使用母版頁Site.master:
Default.aspx
NewSprocs.aspx
ExistingSprocs.aspx
JOINs.aspx
AddingColumns.aspx
ComputedColumns.aspx
EncryptingConfigSections.aspx
ManagedFunctionsAndSprocs.aspx
圖1:添加相關的頁面
像其它文件夾一樣,Default.aspx頁面將列出本部分的內容,記得SectionLevelTutorialListing.ascx用戶控件提供了該功能。因此,將其從解決資源管理器里拖放到Default.aspx頁面.
圖2:將SectionLevelTutorialListing.ascx用戶控件拖到Default.aspx頁面
最后,將這些頁面添加到Web.sitemap文件里。特別的,把下面的代碼放在“Working with Batched Data”
<siteMapNode>標簽后面:
<siteMapNode url="~/AdvancedDAL/Default.aspx" title="Advanced DAL Scenarios" description="Explore a number of advanced Data Access Layer scenarios."> <siteMapNode url="~/AdvancedDAL/NewSprocs.aspx" title="Creating New Stored Procedures for TableAdapters" description="Learn how to have the TableAdapter wizard automatically create and use stored procedures." /> <siteMapNode url="~/AdvancedDAL/ExistingSprocs.aspx" title="Using Existing Stored Procedures for TableAdapters" description="See how to plug existing stored procedures into a TableAdapter." /> <siteMapNode url="~/AdvancedDAL/JOINs.aspx" title="Returning Data Using JOINs" description="Learn how to augment your DataTables to work with data returned from multiple tables via a JOIN query." /> <siteMapNode url="~/AdvancedDAL/AddingColumns.aspx" title="Adding DataColumns to a DataTable" description="Master adding new columns to an existing DataTable." /> <siteMapNode url="~/AdvancedDAL/ComputedColumns.aspx" title="Working with Computed Columns" description="Explore how to work with computed columns when using Typed DataSets." /> <siteMapNode url="~/AdvancedDAL/EncryptingConfigSections.aspx" title="Protected Connection Strings in Web.config" description="Protect your connection string information in Web.config using encryption." /> <siteMapNode url="~/AdvancedDAL/ManagedFunctionsAndSprocs.aspx" title="Creating Managed SQL Functions and Stored Procedures" description="See how to create SQL functions and stored procedures using managed code." /> </siteMapNode>
更新Web.sitemap文件后,花點時間在瀏覽器里查看,左邊的菜單將包括本部分的內容.
圖3:網站地圖現在包含了不部分的頁面
第二步:設置TableAdapter創建新的存儲過程
我們在~/App_Code/DAL文件夾里創建一個類型化的DataSet,名稱為NorthwindWithSprocs.xsd.由于我們在以前的教程里已經詳細探討了創建細節,因此我們這里一筆帶過,如果你想知道詳細的創建過程請參閱前面的第1章《創建一個數據訪問層》在DAL文件夾上右擊鼠標選“添加新項”,選DataSet模板,如圖4所示.
圖4:新建一個名為NorthwindWithSprocs.xsd的數據集
這樣將會創建一個新的類型化的DataSet,打開設計器,創建一個新的TableAdapter,展開TableAdapter設置向?qū)?向?qū)У牡谝徊绞亲屛覀冞x擇要連接的數據庫.在下拉列表里有一個連接到Northwind數據庫的連接字符串,選中它,再點下一步。接下來的界面讓我們選擇TableAdapter以哪種方式訪問數據庫.在以前的教程里我們選擇的是“Use SQL statements”,不過在本文我們選第二項:“Create new stored procedures”,點下一步.
圖5:設置TableAdpater創建新的存儲過程
接下來,我們要指定主查詢(main query).我們將創建一個存儲過程來包含SELECT查詢.
使用下面的SELECT查詢:
SELECT ProductID, ProductName, SupplierID, CategoryID, QuantityPerUnit, UnitPrice, UnitsInStock, UnitsOnOrder, ReorderLevel, Discontinued FROM Products
圖6:鍵入SELECT查詢
注意:在名為Northwind的數據集里的ProductsTableAdapter的主查詢與上面本文定義的主查詢有所不同。那個主查詢還返回了每個產品的category名稱和company名稱.不過在后面的文章我們將對本文的TableAdapter添加這些相關的代碼.再點“Advanced Options”按鈕.我們可以指定是否讓向?qū)門ableAdapter自動生成insert, update和delete statements;是否使用開發式并發操作(optimistic concurrency);是否完成inserts 和 update操作后刷新數據表.在默認情況下,自動選中“Generate Insert, Update and Delete statements”選項。另外,本文不用選擇“Use optimistic concurrency”項.當選擇自動創建存儲過程時,“Refresh the data table”項將被忽略掉.不管是否選中該項,最終的insert 和update存儲過程都會檢索剛添加或剛更新(just-inserted or just-updated record)的記錄,我們將在第三步看到.
圖7:選中“Generate Insert, Update and Delete statements”項
注意:當選中“Use optimistic concurrency”項的時候,向?qū)赪HERE語句里添加額外的條件,當其它列的值發生改動的話,將阻止數據更新.關于使用TableAdapter內置的optimistic concurrency功能請參閱第21章《實現開放式并發》輸入SELECT主查詢并選取“Generate Insert, Update and Delete statements”項后,點下一步,接下來的界面,如圖8所示,讓我們?yōu)閟electing, inserting, updating, 和deleting數據的存儲過程命名.將這些存儲過程的名字改為Products_Select, Products_Insert, Products_Update, 和Products_Delete.
圖8:為存儲過程重命名
向?qū)?chuàng)建了4個存儲過程,點“Preview SQL Script”按鈕,你可以在Preview SQL Script 對話框里將腳本保存在一個文件里或復制到剪貼板.
圖9:預覽生成的存儲過程
對存儲過程重命名后,點下一步,對TableAdapter相應的方法命名.就像使用SQL statements一樣,我們可以創建方法來填充一個現有的DataTable或返回一個新的DataTable;我們也一個指定TableAdapter是否采用DB-Direct模式來插入、更新、刪除記錄.全選這3項,只不過將Return a DataTable方法重命名為GetProducts,如圖10所示:
圖10:將方法重命名為Fill 和GetProducts
點Next總覽向?qū)?zhí)行的步驟.點Finish按鈕完成設置.一旦向?qū)ЫY(jié)束后,將返回DataSet設計器,它此時將包括ProductsDataTable.
圖11:DataSet設計器將顯示剛剛添加的ProductsDataTable
第三步:考察剛剛創建的存儲過程
我們在第二步里用向?qū)?chuàng)建了選擇、插入、更新、刪除數據的存儲過程.這些存儲過程可以通過Visual Studio查看或修改.打開服務器資源管理器,點到數據庫的存儲過程文件夾。如圖12所示,Northwind數據庫包含了4個新的存儲過程,Products_Delete, Products_Insert, Products_Select, and Products_Update.
圖12:可以在Stored Procedures文件夾里找到我們創建的4個存儲過程
注意:如果你看不到服務器資源管理器,點“View”菜單,選Server Explorer項.如果你無法找到新創建的存儲過程,右擊Stored Procedures文件夾,選“刷新”.
要查看或修改某個存儲過程,在服務器資源管理器里雙擊其名字或右擊該存儲過程,選”打開“。如13顯示的是打開Products_Delete存儲過程的畫面.
圖13:可以在Visual Studio里打開并修改存儲過程
Products_Delete和Products_Select存儲過程的內容很好理解。比如下面的代碼構成了Products_Insert存儲過程.
ALTER PROCEDURE dbo.Products_Insert ( @ProductName nvarchar(40), @SupplierID int, @CategoryID int, @QuantityPerUnit nvarchar(20), @UnitPrice money, @UnitsInStock smallint, @UnitsOnOrder smallint, @ReorderLevel smallint, @Discontinued bit ) AS SET NOCOUNT OFF; INSERT INTO [Products] ([ProductName], [SupplierID], [CategoryID], [QuantityPerUnit], [UnitPrice], [UnitsInStock], [UnitsOnOrder], [ReorderLevel], [Discontinued]) VALUES (@ProductName, @SupplierID, @CategoryID, @QuantityPerUnit, @UnitPrice, @UnitsInStock, @UnitsOnOrder, @ReorderLevel, @Discontinued); SELECT ProductID, ProductName, SupplierID, CategoryID, QuantityPerUnit, UnitPrice, UnitsInStock, UnitsOnOrder, ReorderLevel, Discontinued FROM Products WHERE (ProductID = SCOPE_IDENTITY())
在TableAdapter向?qū)Ю锒x的SELECT查詢返回Products表里的列,這些列又作為存儲過程的輸入?yún)?shù)并運用到INSERT statement中.緊接著的是一個SELECT查詢,返回Products表里最新添加的記錄的各列的值(包括ProductID)。當使用Batch Update模式添加一個新記錄時,刷新功能是很有用的。因為它將最新添加的ProductRow instances實例的ProductID屬性賦值為數據庫指派的自增值.
下面的代碼說明了該功能.代碼創建了基于NorthwindWithSprocs數據集的ProductsTableAdapter以及ProductsDataTable。要向數據庫添加一個新的產品,我們要創建一個ProductsRow instance實例,對其賦值,并調用TableAdapter的Update方法,再傳遞給ProductsDataTable.在內部,TableAdapter的Update方法遍歷傳遞給DataTable的所有ProductsRow instance實例(在本例,只有一個。因為我們只添加了一個產品),并執行相應的insert, update, 或delete命令。此時,執行Products_Insert存儲過程,其向Products表添加一條新記錄,并返回該記錄的詳細信息,然后更新ProductsRow instance實例的ProductID值。Update方法完成后,我們就可以通過ProductsRow的ProductID屬性訪問新添加記錄的ProductID值了.
// Create the ProductsTableAdapter and ProductsDataTable NorthwindWithSprocsTableAdapters.ProductsTableAdapter productsAPI = new NorthwindWithSprocsTableAdapters.ProductsTableAdapter(); NorthwindWithSprocs.ProductsDataTable products = new NorthwindWithSprocs.ProductsDataTable(); // Create a new ProductsRow instance and set its properties NorthwindWithSprocs.ProductsRow product = products.NewProductsRow(); product.ProductName = "New Product"; product.CategoryID = 1; // Beverages product.Discontinued = false; // Add the ProductsRow instance to the DataTable products.AddProductsRow(product); // Update the DataTable using the Batch Update pattern productsAPI.Update(products); // At this point, we can determine the value of the newly-added record's ProductID int newlyAddedProductIDValue = product.ProductID;
類似的,Products_Update存儲過程的UPDATE statement后面也包含一個SELECT statement,如下:
ALTER PROCEDURE dbo.Products_Update ( @ProductName nvarchar(40), @SupplierID int, @CategoryID int, @QuantityPerUnit nvarchar(20), @UnitPrice money, @UnitsInStock smallint, @UnitsOnOrder smallint, @ReorderLevel smallint, @Discontinued bit, @Original_ProductID int, @ProductID int ) AS SET NOCOUNT OFF; UPDATE [Products] SET [ProductName] = @ProductName, [SupplierID] = @SupplierID, [CategoryID] = @CategoryID, [QuantityPerUnit] = @QuantityPerUnit, [UnitPrice] = @UnitPrice, [UnitsInStock] = @UnitsInStock, [UnitsOnOrder] = @UnitsOnOrder, [ReorderLevel] = @ReorderLevel, [Discontinued] = @Discontinued WHERE (([ProductID] = @Original_ProductID)); SELECT ProductID, ProductName, SupplierID, CategoryID, QuantityPerUnit, UnitPrice, UnitsInStock, UnitsOnOrder, ReorderLevel, Discontinued FROM Products WHERE (ProductID = @ProductID)
我們注意到該存儲過程有2個關于ProductID的參數,即@Original_ProductID 和@ProductID,這樣以來我們就可以對主鍵值進行改動了.舉個例子:有一個employee(雇員)數據庫,每條employee記錄都用雇員的社保號碼作為其主鍵值.要想更改某條記錄的社保號碼,必須提供新的號碼以及原始號碼.不過對Products表來說用不著,因為列ProductID是一個唯一標識列(IDENTITY column),不應對其更改.實際上,Products_Update存儲過程里的UPDATE statement并沒有包含ProductID列,因此,如果在UPDATE statement的WHERE字句里使用@Original_ProductID的話,顯得多此一舉,而應該使用@ProductID參數.當更新某個存儲過程的參數時,TableAdapter里所有那些調用該存儲過程方法都應該進行更新.
第四步:修改存儲過程的參數并更新TableAdapter
由于@Original_ProductID參數是多余的,讓我們將其從Products_Update存儲過程里完全清除.打開Products_Update存儲過程,刪除@Original_ProductID參數,在UPDATE statement的WHERE字句里將@Original_ProductID改為@ProductID. 完成上述修改后,該存儲過程里的T-SQL看起來應該和下面的差不多:
ALTER PROCEDURE dbo.Products_Update ( @ProductName nvarchar(40), @SupplierID int, @CategoryID int, @QuantityPerUnit nvarchar(20), @UnitPrice money, @UnitsInStock smallint, @UnitsOnOrder smallint, @ReorderLevel smallint, @Discontinued bit, @ProductID int ) AS SET NOCOUNT OFF; UPDATE [Products] SET [ProductName] = @ProductName, [SupplierID] = @SupplierID, [CategoryID] = @CategoryID, [QuantityPerUnit] = @QuantityPerUnit, [UnitPrice] = @UnitPrice, [UnitsInStock] = @UnitsInStock, [UnitsOnOrder] = @UnitsOnOrder, [ReorderLevel] = @ReorderLevel, [Discontinued] = @Discontinued WHERE (([ProductID] = @ProductID)); SELECT ProductID, ProductName, SupplierID, CategoryID, QuantityPerUnit, UnitPrice, UnitsInStock, UnitsOnOrder, ReorderLevel, Discontinued FROM Products WHERE (ProductID = @ProductID)
按Ctrl+S或點工具欄里的“保存”圖標,保存更改.此時,Products_Update存儲過程不會執行@Original_ProductID參數,但TableAdapter仍然會傳遞該參數.要想查看TableAdapter傳遞給Products_Update存儲過程的參數,你可以在設計器里選中TableAdapter,轉到屬性窗口,點更新命令的參數集(UpdateCommand'sParameters collection)里的橢圓型區域,這樣將轉到Parameters Collection Editor對話框,如圖14所示:
圖14:對話框里列出了傳遞給Products_Update存儲過程的參數
要刪除參數,只需選中它,再點Remove按鈕.
要刷新參數的話,你也可以在設計器里選中TableAdapter,點右鍵選“設置”,這將會開啟TableAdapter設置向?qū)В谐隽擞糜趕elect, insert, updat和delete的存儲過程,并列出了這些存儲過程的輸入?yún)?shù).如果你在Update下拉列表里選Products_Update的話,你可以看到該存儲過程包含的輸入?yún)?shù)里已經沒有包含@Original_ProductID了(見圖15),點Finish將對TableAdapter使用的參數集自動更新.
圖15:你可以通過使用TableAdapter的設置向?qū)硭⑿聟?shù)集
第五步:添加額外的TableAdapter方法
我們在第二步說過,當創建一個新的TableAdapter時,很容易自動地生成相應的存儲過程,同樣我們也可以向TableAdapter添加額外的方法.作為演示,讓我們向ProductsTableAdapter添加一個方法GetProductByProductID(productID),該方法將一個ProductID作為輸入?yún)?shù),并返回該產品的詳細信息.在ProductsTableAdapter上點擊右鍵,選擇“添加查詢”.
圖16:向TableAdapter添加新查詢
這將開啟TableAdapter查詢設置向?qū)?。首先,向?qū)⒃儐栆院畏N方式訪問數據庫,我們將創建一個新的存儲過程,因此選“Create a new stored procedure”,再點Next.
圖17:選中“Create a new stored procedure”項
接下來,向?qū)г儐栁覀儓?zhí)行哪種查詢,是返回一系列行?一個標量值?又或者執行UPDATE, INSERT,或 DELETE statement.由于GetProductByProductID(productID)方法將返回一行,我們選擇“SELECT which returns row”項,再點Next.
圖18:選擇“SELECT which returns row” 項
接下來的界面將展示TableAdapter的主查詢,其僅僅列出了存儲過程的名字(也就是dbo.Products_Select).將其刪除,替換為如下的SELECT statement,它返回某個具體產品的所有列.
SELECT ProductID, ProductName, SupplierID, CategoryID, QuantityPerUnit, UnitPrice, UnitsInStock, UnitsOnOrder, ReorderLevel, Discontinued FROM Products WHERE ProductID = @ProductID
圖19:將存儲過程的名字替換為一個SELECT查詢.
接下來要對創建的存儲過程命名,輸入Products_SelectByProductID,點Next.
圖20:將新存儲過程命名為Products_SelectByProductID
最后一步將要我們對自動生成的名字重新命名,并指定是否使用Fill a DataTable模式、是否使用Return a DataTable模式,抑或這2種模式都采用.就本文而言,都選中這2項并將方法重命名為FillByProductID 和 GetProductByProductID.點Next,再點Finish完成設置向?qū)?
圖21:將TableAdapter的方法重命名為FillByProductID 和 GetProductByProductID
完成向?qū)Ш?,TableAdapter將包含一個新的可用方法——GetProductByProductID(productID),當調用該方法時,將執行我們剛剛創建的Products_SelectByProductID存儲過程.花點時間在服務器資源管理器里查看該存儲過程,點Stored Procedures文件夾,并打開Products_SelectByProductID(如果你沒看到它,在Stored Procedures文件夾上右擊鼠標,選“刷新”).
請注意,SelectByProductID存儲過程將@ProductID作為輸入?yún)?shù),并執行我們在向?qū)Ю镙斎氲腟ELECT Statement,如下:
ALTER PROCEDURE dbo.Products_SelectByProductID ( @ProductID int ) AS SET NOCOUNT ON; SELECT ProductID, ProductName, SupplierID, CategoryID, QuantityPerUnit, UnitPrice, UnitsInStock, UnitsOnOrder, ReorderLevel, Discontinued FROM Products WHERE ProductID = @ProductID
第六步:創建一個業務邏輯層類
在我們打算從表現層訪問產品前,我們首先需要為新添加的數據集創建一個BLL class,在~/App_Code/BLL文件夾里創建一個ProductsBLLWithSprocs.cs文件,如下:
using System; using System.Data; using System.Configuration; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Web.UI.HtmlControls; using NorthwindWithSprocsTableAdapters; [System.ComponentModel.DataObject] public class ProductsBLLWithSprocs { private ProductsTableAdapter _productsAdapter = null; protected ProductsTableAdapter Adapter { get { if (_productsAdapter == null) _productsAdapter = new ProductsTableAdapter(); return _productsAdapter; } } [System.ComponentModel.DataObjectMethodAttribute (System.ComponentModel.DataObjectMethodType.Select, true)] public NorthwindWithSprocs.ProductsDataTable GetProducts() { return Adapter.GetProducts(); } [System.ComponentModel.DataObjectMethodAttribute (System.ComponentModel.DataObjectMethodType.Select, false)] public NorthwindWithSprocs.ProductsDataTable GetProductByProductID(int productID) { return Adapter.GetProductByProductID(productID); } [System.ComponentModel.DataObjectMethodAttribute (System.ComponentModel.DataObjectMethodType.Insert, true)] public bool AddProduct (string productName, int? supplierID, int? categoryID, string quantityPerUnit, decimal? unitPrice, short? unitsInStock, short? unitsOnOrder, short? reorderLevel, bool discontinued) { // Create a new ProductRow instance NorthwindWithSprocs.ProductsDataTable products = new NorthwindWithSprocs.ProductsDataTable(); NorthwindWithSprocs.ProductsRow product = products.NewProductsRow(); product.ProductName = productName; if (supplierID == null) product.SetSupplierIDNull(); else product.SupplierID = supplierID.Value; if (categoryID == null) product.SetCategoryIDNull(); else product.CategoryID = categoryID.Value; if (quantityPerUnit == null) product.SetQuantityPerUnitNull(); else product.QuantityPerUnit = quantityPerUnit; if (unitPrice == null) product.SetUnitPriceNull(); else product.UnitPrice = unitPrice.Value; if (unitsInStock == null) product.SetUnitsInStockNull(); else product.UnitsInStock = unitsInStock.Value; if (unitsOnOrder == null) product.SetUnitsOnOrderNull(); else product.UnitsOnOrder = unitsOnOrder.Value; if (reorderLevel == null) product.SetReorderLevelNull(); else product.ReorderLevel = reorderLevel.Value; product.Discontinued = discontinued; // Add the new product products.AddProductsRow(product); int rowsAffected = Adapter.Update(products); // Return true if precisely one row was inserted, otherwise false return rowsAffected == 1; } [System.ComponentModel.DataObjectMethodAttribute (System.ComponentModel.DataObjectMethodType.Update, true)] public bool UpdateProduct (string productName, int? supplierID, int? categoryID, string quantityPerUnit, decimal? unitPrice, short? unitsInStock, short? unitsOnOrder, short? reorderLevel, bool discontinued, int productID) { NorthwindWithSprocs.ProductsDataTable products = Adapter.GetProductByProductID(productID); if (products.Count == 0) // no matching record found, return false return false; NorthwindWithSprocs.ProductsRow product = products[0]; product.ProductName = productName; if (supplierID == null) product.SetSupplierIDNull(); else product.SupplierID = supplierID.Value; if (categoryID == null) product.SetCategoryIDNull(); else product.CategoryID = categoryID.Value; if (quantityPerUnit == null) product.SetQuantityPerUnitNull(); else product.QuantityPerUnit = quantityPerUnit; if (unitPrice == null) product.SetUnitPriceNull(); else product.UnitPrice = unitPrice.Value; if (unitsInStock == null) product.SetUnitsInStockNull(); else product.UnitsInStock = unitsInStock.Value; if (unitsOnOrder == null) product.SetUnitsOnOrderNull(); else product.UnitsOnOrder = unitsOnOrder.Value; if (reorderLevel == null) product.SetReorderLevelNull(); else product.ReorderLevel = reorderLevel.Value; product.Discontinued = discontinued; // Update the product record int rowsAffected = Adapter.Update(product); // Return true if precisely one row was updated, otherwise false return rowsAffected == 1; } [System.ComponentModel.DataObjectMethodAttribute (System.ComponentModel.DataObjectMethodType.Delete, true)] public bool DeleteProduct(int productID) { int rowsAffected = Adapter.Delete(productID); // Return true if precisely one row was deleted, otherwise false return rowsAffected == 1; } }
該類和以前章節所創建的ProductsBLL class類差不多,只是它用的是數據集 NorthwindWithSprocs的ProductsTableAdapter 和 ProductsDataTable object對象。與ProductsBLL類使用using NorthwindTableAdapters不同,ProductsBLLWithSprocs類使用的是using NorthwindWithSprocsTableAdapters.同樣的,該類的ProductsDataTable和 ProductsRow對象使用的是NorthwindWithSprocs命名空間.我們的ProductsBLLWithSprocs class類提供了2種數據訪問方法GetProducts() 和GetProductByProductID().另外,還有添加、更新、刪除單個產品的方法.
第七步:在表現層出來數據集NorthwindWithSprocs
此時,我們以及對數據訪問層和業務邏輯層做了相關改動,接下來我們要創建一個ASP.NET頁面調用BLL的ProductsBLLWithSprocs class類以展示、更新、刪除記錄.
打開AdvancedDAL文件夾里的NewSprocs.aspx頁面,從工具箱拖一個GridView控件到頁面,設置其ID為Products. 從GridView的智能標簽將其綁定到一個名為ProductsDataSource的ObjectDataSource,設置其調用ProductsBLLWithSprocs類.
圖22:設置ObjectDataSource調用ProductsBLLWithSprocs類
SELECT標簽的下拉列表里有2個方法,GetProducts()和GetProductByProductID().由于我們將在GridView里顯示所有的產品,所以我們選GetProducts()方法.在UPDATE, INSERT, 和DELETE標簽里都只有一個方法,確保選中它們,點Finish按鈕。
完成設置后,Visual Studio會向GridView添加BoundFields列以及一個CheckBoxField列, 啟用GridView控件的“編輯”和“刪除”功能.
圖23:頁面包含一個可以分頁和排序的GridView控件.
就像在以前的教程里探討過的一樣,完成ObjectDataSource的設置后,Visual Studio 會自動的將OldValuesParameterFormatString屬性設置為“original_{0}”. 為使數據修改功能正常工作,要么將該屬性刪除,要么將其設置為“{0}”.
在我們完成設置、啟用“編輯”和“刪除”功能、將OldValuesParameterFormatString屬性設為其默認值后,頁面的聲明代碼看起來應該和下面的差不多:
<asp:GridView ID="Products" runat="server" AutoGenerateColumns="False" DataKeyNames="ProductID" DataSourceID="ProductsDataSource"> <Columns> <asp:CommandField ShowDeleteButton="True" ShowEditButton="True" /> <asp:BoundField DataField="ProductID" HeaderText="ProductID" InsertVisible="False" ReadOnly="True" SortExpression="ProductID" /> <asp:BoundField DataField="ProductName" HeaderText="ProductName" SortExpression="ProductName" /> <asp:BoundField DataField="SupplierID" HeaderText="SupplierID" SortExpression="SupplierID" /> <asp:BoundField DataField="CategoryID" HeaderText="CategoryID" SortExpression="CategoryID" /> <asp:BoundField DataField="QuantityPerUnit" HeaderText="QuantityPerUnit" SortExpression="QuantityPerUnit" /> <asp:BoundField DataField="UnitPrice" HeaderText="UnitPrice" SortExpression="UnitPrice" /> <asp:BoundField DataField="UnitsInStock" HeaderText="UnitsInStock" SortExpression="UnitsInStock" /> <asp:BoundField DataField="UnitsOnOrder" HeaderText="UnitsOnOrder" SortExpression="UnitsOnOrder" /> <asp:BoundField DataField="ReorderLevel" HeaderText="ReorderLevel" SortExpression="ReorderLevel" /> <asp:CheckBoxField DataField="Discontinued" HeaderText="Discontinued" SortExpression="Discontinued" /> </Columns> </asp:GridView> <asp:ObjectDataSource ID="ProductsDataSource" runat="server" DeleteMethod="DeleteProduct" InsertMethod="AddProduct" SelectMethod="GetProducts" TypeName="ProductsBLLWithSprocs" UpdateMethod="UpdateProduct"> <DeleteParameters> <asp:Parameter Name="productID" Type="Int32" /> </DeleteParameters> <UpdateParameters> <asp:Parameter Name="productName" Type="String" /> <asp:Parameter Name="supplierID" Type="Int32" /> <asp:Parameter Name="categoryID" Type="Int32" /> <asp:Parameter Name="quantityPerUnit" Type="String" /> <asp:Parameter Name="unitPrice" Type="Decimal" /> <asp:Parameter Name="unitsInStock" Type="Int16" /> <asp:Parameter Name="unitsOnOrder" Type="Int16" /> <asp:Parameter Name="reorderLevel" Type="Int16" /> <asp:Parameter Name="discontinued" Type="Boolean" /> <asp:Parameter Name="productID" Type="Int32" /> </UpdateParameters> <InsertParameters> <asp:Parameter Name="productName" Type="String" /> <asp:Parameter Name="supplierID" Type="Int32" /> <asp:Parameter Name="categoryID" Type="Int32" /> <asp:Parameter Name="quantityPerUnit" Type="String" /> <asp:Parameter Name="unitPrice" Type="Decimal" /> <asp:Parameter Name="unitsInStock" Type="Int16" /> <asp:Parameter Name="unitsOnOrder" Type="Int16" /> <asp:Parameter Name="reorderLevel" Type="Int16" /> <asp:Parameter Name="discontinued" Type="Boolean" /> </InsertParameters> </asp:ObjectDataSource>
此時,我們可以對GridView控件做些修改,比如在編輯界面里使用確認控件,在CategoryID 和 SupplierID列放置DropDownList控件,當點擊Delete按鈕時彈出確認框等.由于在以前的教程我們探討過這些主題,我不打算在此多花筆墨。
不管你做沒做這些改進,讓我們在瀏覽器里對頁面測試,如圖24所示.在GridView控件里每行都可以編輯和刪除.
圖24:可以通過GridView對產品進行查看、編輯、刪除
結語:
類型化數據集里的TableAdapters可以通過ad-hoc SQL statement或存儲過程訪問數據庫里的數據.當處理存儲過程時,我們要么使用現有的存儲過程,要么使用TableAdapter向?qū)?chuàng)建一個基于SELECT查詢的新的存儲過程.在本文,我們考察了如何自動的創建一個存儲過程.
雖然自動創建可以節省時間,但是在某些情況下,向?qū)ё詣觿?chuàng)建的存儲過程與我們的期望值還是有差距.比如自動創建的Products_Update存儲過程,它包含@Original_ProductID 和 @ProductID這2個參數,但@Original_ProductID參數對我們來說是多余的.
在接下來的文章,我們將考察TableAdapter使用現有的存儲過程的情況.
祝編程快樂!
作者簡介
本系列教程作者 Scott Mitchell,著有六本ASP/ASP.NET方面的書,是4GuysFromRolla.com的創始人,自1998年以來一直應用 微軟Web技術。大家可以點擊查看全部教程《[翻譯]Scott Mitchell 的ASP.NET 2.0數據教程》,希望對大家的學習ASP.NET有所幫助。
- asp.net 結合mysql存儲過程進行分頁代碼
- asp.net安全、實用、簡單的大容量存儲過程分頁
- asp.net 存儲過程調用
- asp.net結合aspnetpager使用SQL2005的存儲過程分頁
- asp.net sql存儲過程
- 在ASP.NET中用存儲過程執行SQL語句
- asp.net利用存儲過程和div+css實現分頁(類似于博客園首頁分頁)
- 在ASP.NET 2.0中操作數據之六十六:在TableAdapters中使用現有的存儲過程
- 在ASP.NET 2.0中操作數據之七十二:調試存儲過程
- 在ASP.NET 2.0中操作數據之七十三:用Managed Code創建存儲過程和用戶自定義函數(上部分)
相關文章
NopCommerce架構分析之(四)基于路由實現靈活的插件機制
本文主要介紹NopCommerce中,通過注冊路由,實現插件的機制,同時,NopCommerce中每個插件都集成IPlugin接口,插件擁有安裝和卸載的功能。2016-04-04.NET應用程序集DLL與EXE工作機制及原理介紹
這篇文章介紹了.NET應用程序集DLL與EXE工作機制及原理,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2022-02-02在ASP.NET 2.0中操作數據之五十二:使用FileUpload上傳文件
本文主要介紹ASP.NET中為了演示上傳文件,我們在數據庫上建了兩個字段,分別存儲二進制圖片和PDF路徑,然后介紹了如何使用FileUpload 完成上傳文件。2016-05-05在ASP.NET 2.0中操作數據之二十二:為刪除數據添加客戶端確認
本文主要介紹ASP.NET 2.0中利用JavaScript在刪除按鈕的客戶端onclick事件(在ASP.NET中是OnClientClick)中調用confirm(string)方法,從而顯示一個確認窗口,根據窗口的返回值執行不同的操作。2016-05-05在ASP.NET 2.0中操作數據之三十五:使用Repeater和DataList單頁面實現主/從報表
前面已經介紹了ASP.NET 2.0中如何使用兩個頁面實現主/從報表,本文主要講解,如何使用一個單獨頁面實現主/從報表。2016-05-05.NET多種數據庫大數據批量插入、更新(支持SqlServer、MySql、PgSql和Oracle)
這篇文章介紹了.NET多種數據庫大數據批量插入、更新。對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2021-11-11在ASP.NET 2.0中操作數據之十四:使用FormView 的模板
前面介紹了GridView和DetailsView控件可以使用TemplateField來自定義輸出,但是呈現的樣式還是一種四四方方的格子狀。當我們想完全自定義的時候,他們就愛莫能助了,這時我們就可以使用FormView控件來實現我們想要的效果了。2016-05-05在ASP.NET 2.0中操作數據之六:編程設置ObjectDataSource的參數值
本文主要介紹在ObjectDataSource控件的Selecting事件中,設置InputParameters參數,配合業務層的查詢方法,以達到查詢不同數據的目的。2016-04-04