Android中3種圖片壓縮處理方法
Android中圖片的存在形式:
1:文件形式:二進制形式存在與硬盤中。
2:流的形式:二進制形式存在與內存中。
3:Bitmap的形式
三種形式的區別:
文件形式和流的形式:對圖片體積大小并沒有影響。也就是說,如果你手機SD卡上的圖片通過流的形式讀到內存中,在內存中的大小也是原圖的大小。
注意:不是Bitmap的形式。
Bitmap的形式:圖片占用的內存會瞬間變大。
以下是代碼的形式:
/** * 圖片壓縮的方法總結 */ /* * 圖片壓縮的方法01:質量壓縮方法 */ private Bitmap compressImage(Bitmap beforBitmap) { // 可以捕獲內存緩沖區的數據,轉換成字節數組。 ByteArrayOutputStream bos = new ByteArrayOutputStream(); if (beforBitmap != null) { // 第一個參數:圖片壓縮的格式;第二個參數:壓縮的比率;第三個參數:壓縮的數據存放到bos中 beforBitmap.compress(CompressFormat.JPEG, 100, bos); int options = 100; // 循環判斷壓縮后的圖片是否是大于100kb,如果大于,就繼續壓縮,否則就不壓縮 while (bos.toByteArray().length / 1024 > 100) { bos.reset();// 置為空 // 壓縮options% beforBitmap.compress(CompressFormat.JPEG, options, bos); // 每次都減少10 options -= 10; } // 從bos中將數據讀出來 存放到ByteArrayInputStream中 ByteArrayInputStream bis = new ByteArrayInputStream( bos.toByteArray()); // 將數據轉換成圖片 Bitmap afterBitmap = BitmapFactory.decodeStream(bis); return afterBitmap; } return null; } /* * 圖片壓縮方法02:獲得縮略圖 */ public Bitmap getThumbnail(int id) { // 獲得原圖 Bitmap beforeBitmap = BitmapFactory.decodeResource( mContext.getResources(), id); // 寬 int w = mContext.getResources() .getDimensionPixelOffset(R.dimen.image_w); // 高 int h = mContext.getResources().getDimensionPixelSize(R.dimen.image_h); // 獲得縮略圖 Bitmap afterBitmap = ThumbnailUtils .extractThumbnail(beforeBitmap, w, h); return afterBitmap; } /** * 圖片壓縮03 * * @param id * 要操作的圖片的大小 * @param newWidth * 圖片指定的寬度 * @param newHeight * 圖片指定的高度 * @return */ public Bitmap compressBitmap(int id, double newWidth, double newHeight) { // 獲得原圖 Bitmap beforeBitmap = BitmapFactory.decodeResource( mContext.getResources(), id); // 圖片原有的寬度和高度 float beforeWidth = beforeBitmap.getWidth(); float beforeHeight = beforeBitmap.getHeight(); // 計算寬高縮放率 float scaleWidth = 0; float scaleHeight = 0; if (beforeWidth > beforeHeight) { scaleWidth = ((float) newWidth) / beforeWidth; scaleHeight = ((float) newHeight) / beforeHeight; } else { scaleWidth = ((float) newWidth) / beforeHeight; scaleHeight = ((float) newHeight) / beforeWidth; } // 矩陣對象 Matrix matrix = new Matrix(); // 縮放圖片動作 縮放比例 matrix.postScale(scaleWidth, scaleHeight); // 創建一個新的Bitmap 從原始圖像剪切圖像 Bitmap afterBitmap = Bitmap.createBitmap(beforeBitmap, 0, 0, (int) beforeWidth, (int) beforeHeight, matrix, true); return afterBitmap; }
相關文章
RecyclerView中使用CheckBox出現勾選混亂的解決方法
這篇文章主要為大家詳細介紹了RecyclerView中使用CheckBox出現勾選混亂的解決方法,具有一定的參考價值,感興趣的小伙伴們可以參考一下2017-12-12Android Handler runWithScissors 梳理流程解析
這篇文章主要為大家介紹了Android Handler runWithScissors 梳理流程解析,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪2022-10-10Android在view.requestFocus(0)返回false的解決辦法
這篇文章主要介紹了Android在view.requestFocus(0)返回false的解決辦法,非常不錯,具有參考借鑒價值,需要的朋友參考下2016-08-08A10_DatePicker的對話框設置(使用OnDateSetListener監聽器)
本文主要彌補A07_TimePicker & DatePicker & AnalogClock & DigitalClock 的設置,具體實現代碼如下,感興趣的朋友可以參考下哈2013-06-06Android實現MVVM架構數據刷新詳解流程
MVVM架構模式,即Model-View-ViewModel三個層級,MVVM模式出來的時間已經很長了,網上關于MVVM模式的解析也有很多,我這里只說一下我自己的理解,基本上是和MVP模式相比較的一個差異2021-10-10