libevent庫的使用--定時器的使用實例
#include <sys/types.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/stat.h>
#include <event.h>
#include <evhttp.h>
#define RELOAD_TIMEOUT 5
#define DEFAULT_FILE "sample.html"
char *filedata;
time_t lasttime = 0;
char filename[80];
int counter = 0;
void read_file()
{
int size = 0;
char *data;
struct stat buf;
stat(filename,&buf);
if (buf.st_mtime > lasttime)
{
if (counter++)
fprintf(stderr,"Reloading file: %s",filename);
else
fprintf(stderr,"Loading file: %s",filename);
FILE *f = fopen(filename, "rb");
if (f == NULL)
{
fprintf(stderr,"Couldn't open file\n");
exit(1);
}
fseek(f, 0, SEEK_END);
size = ftell(f);
fseek(f, 0, SEEK_SET);
data = (char *)malloc(size+1);
fread(data, sizeof(char), size, f);
filedata = (char *)malloc(size+1);
strcpy(filedata,data);
fclose(f);
fprintf(stderr," (%d bytes)\n",size);
lasttime = buf.st_mtime;
}
}
void load_file()
{
struct event *loadfile_event;
struct timeval tv;
read_file();
tv.tv_sec = RELOAD_TIMEOUT;
tv.tv_usec = 0;
loadfile_event = malloc(sizeof(struct event));
evtimer_set(loadfile_event,
load_file,
loadfile_event);
evtimer_add(loadfile_event,
&tv);
}
void generic_request_handler(struct evhttp_request *req, void *arg)
{
struct evbuffer *evb = evbuffer_new();
evbuffer_add_printf(evb, "%s",filedata);
evhttp_send_reply(req, HTTP_OK, "Client", evb);
evbuffer_free(evb);
}
int main(int argc, char *argv[])
{
short http_port = 8081;
char *http_addr = "192.168.0.22";
struct evhttp *http_server = NULL;
if (argc > 1)
{
strcpy(filename,argv[1]);
printf("Using %s\n",filename);
}
else
{
strcpy(filename,DEFAULT_FILE);
}
event_init();
load_file();
http_server = evhttp_start(http_addr, http_port);
evhttp_set_gencb(http_server, generic_request_handler, NULL);
fprintf(stderr, "Server started on port %d\n", http_port);
event_dispatch();
}
這個服務器的基本原理與前面的示例相同。首先,腳本設置一個 HTTP 服務器,它只響應對基本 URL 主機/端口組合的請求(不處理請求 URI)。第一步是裝載文件 (read_file())。在裝載最初的文件時和在計時器觸發回調時都使用此函數。
read_file() 函數使用 stat() 函數調用檢查文件的修改時間,只有在上一次裝載之后修改了文件的情況下,它才重新讀取文件的內容。此函數通過調用 fread() 裝載文件數據,把數據復制到另一個結構中,然后使用 strcpy() 把數據從裝載的字符串轉移到全局字符串中。
load_file() 函數是觸發計時器時調用的函數。它通過調用 read_file() 裝載內容,然后使用 RELOAD_TIMEOUT 值設置計時器,作為嘗試裝載文件之前的秒數。libevent 計時器使用 timeval 結構,允許按秒和毫秒指定計時器。計時器不是周期性的;當觸發計時器事件時設置它,然后從事件隊列中刪除事件。
使用與前面的示例相同的格式編譯代碼:$ gcc -o basichttpfile basichttpfile.c -levent。
現在,創建作為數據使用的靜態文件;默認文件是 sample.html,但是可以通過命令行上的第一個參數指定任何文件(見 清單 6)。
清單 6. 創建作為數據使用的靜態文件
$ ./basichttpfile
Loading file: sample.html (8046 bytes)
Server started on port 8081
現在,程序可以接受請求了,重新裝載計時器也啟動了。如果修改 sample.html 的內容,應該會重新裝載此文件并在日志中記錄一個消息。例如,清單 7 中的輸出顯示初始裝載和兩次重新裝載:
清單 7. 輸出顯示初始裝載和兩次重新裝載
$ ./basichttpfile
Loading file: sample.html (8046 bytes)
Server started on port 8081
Reloading file: sample.html (8047 bytes)
Reloading file: sample.html (8048 bytes)
注意,要想獲得最大的收益,必須確保環境沒有限制打開的文件描述符數量??梢允褂?ulimit 命令修改限制(需要適當?shù)臋?quán)限或根訪問)。具體的設置取決與您的 OS,但是在 Linux® 上可以用 -n 選項設置打開的文件描述符(和網絡套接字)的數量
相關文章
CFileDialog的鉤子函數解決對話框的多選之DoModal問題
前幾天領導問我一個問題:就是使用CFileDialog類在設置多選時選中的文件所放的文件緩沖區不知設置多大合適,本文將詳細介紹,需要的朋友可以參考下2012-12-12C語言中6組指針和自增運算符結合方式的運算順序問題
本文通過代碼實現分析了6種組合:* p++,(* p)++,* (p++),++* p,++( * p), * (++p),需要的朋友可以參考下2015-07-07C++實現PyMysql的基本功能實例詳解
這篇文章主要介紹了C++實現PyMysql的基本功能,本文通過實例代碼給大家介紹的非常詳細,對大家的工作或?qū)W習有一定的參考借鑒價值,需要的朋友可以參考下2020-03-03C++?Cartographer源碼中關于傳感器的數據傳遞實現
這篇文章主要介紹了C++?Cartographer源碼中關于傳感器的數據傳遞實現,前面已經談到了Cartographer中添加軌跡的方法和傳感器的數據流動走向。發現在此調用了LaunchSubscribers這個函數來訂閱相關傳感器數據2023-03-03詳解C++中typedef 和 #define 的區別
這篇文章主要介紹了C++中typedef 與 #define 的區別,本文通過實例代碼給大家介紹的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2021-09-09