Qt使用QCamera實現切換相機,分辨率和圖像捕獲功能

更新時間：2023年04月04日 14:24:59 作者：Star_ID

這篇文章主要為大家介紹了如何利用Qt中的相機類QCamera，取景器類QCameraViewfinder，圖像捕獲類QCameraImageCapture實現切換相機、分辨率和圖像捕獲功能，需要的可以了解一下

demo中主要涉及的Qt類有：相機類QCamera，取景器類QCameraViewfinder，圖像捕獲類QCameraImageCapture，因此添加模塊multimedia multimediawidgets。

QT += core gui multimedia multimediawidgets

在widget.h中添加相關類聲明：

class QCamera;
class QCameraViewfinder;
class QCameraImageCapture;
class QCameraInfo;
class QCameraViewfinderSettings;

在類Widget中添加私有變量：

QCamera *camera;                   //相機
QCameraViewfinder *viewfinder;     //取景器
QCameraImageCapture *imageCapture; //圖像捕獲
QList<QCameraInfo> cameras;        //相機列表
QList<QSize> mResSize = {};        //分辨率列表

在widget.cpp中添加頭文件：

#include <QCamera>
#include <QCameraInfo>
#include <QCameraViewfinder>
#include <QCameraImageCapture>
#include <QFileDialog>
#include <QList>
#include <QDebug>

在widget.cpp的構造函數中添加代碼：

先設置下窗口名稱及大小

setWindowTitle("Camera");
setFixedSize(600,400);

接著獲取所有相機列表并選擇一個相機初始化

cameras = QCameraInfo::availableCameras();   //獲取所有相機的列表
//qDebug() << "this is camera: ";
if (cameras.count() > 0) {
    for(const QCameraInfo &cameraInfo:cameras) {
        qDebug() << cameraInfo.description();
    }
    camera = new QCamera(cameras.at(0));     //初始化實例化一個相機對象
}

實例化取景器類，取景器本質是一個窗口類，若不將當前窗口設為父對象，則可以另起一個窗口顯示。將當前窗口設為父對象后，視頻畫面便在當前窗口顯示。

//設置取景器
viewfinder = new QCameraViewfinder(this);
camera->setViewfinder(viewfinder);
viewfinder->resize(600,350);                 //設置取景器顯示大小
//viewfinder->show();

實例化一個圖像捕獲類，并開啟相機

imageCapture = new QCameraImageCapture(camera);
camera->start();                             //開啟相機

設置默認攝像頭的分辨率及幀率。注意：幀率一定要與攝像頭匹配，否則不會顯示畫面。

//設置默認攝像頭參數
QCameraViewfinderSettings set;
set.setResolution(640, 480);                 //設置顯示分辨率
set.setMaximumFrameRate(25);                 //設置幀率
camera->setViewfinderSettings(set);

設置兩個下拉框部件的初始化

//添加初始化的相機選項
for(const QCameraInfo &cameraInfo:cameras) {
    qDebug() << "CameraInfo:" << cameraInfo;
    ui->cameraSel->addItem(cameraInfo.description());
}
ui->cameraSel->setCurrentIndex(0);

//添加初始化相機的分辨率選項
mResSize = camera->supportedViewfinderResolutions();
//qDebug() << "mResSize = " << mResSize;
for (const QSize &msize:mResSize) {
       qDebug() << msize; //攝像頭支持分辨率打印
       ui->resolutionSel->addItem(QString::number(msize.width(), 10) + "*" + QString::number(msize.height(), 10));
}
ui->resolutionSel->setCurrentIndex(0);

調整下widget.ui的內容，添加兩個下拉框及一個按鈕

編寫信號槽連接

首先是選擇攝影機，先釋放之前的內存，再將camera指向新的。選擇新的相機意味著分辨率選項也會變化，因此需要刪除分辨率下拉框中前相機的所有分辨率選項，再添加新相機的所有分辨率選項。

connect(ui->cameraSel, QOverload<int>::of(&QComboBox::activated), [=](int index){
    //qDebug() << "Index" << ui->cameraSel->currentIndex() << ": " << ui->cameraSel->currentText();
    camera->stop();
    delete camera;
    camera = new QCamera(cameras[index]);                //camera指向指定的攝像頭
    camera->setCaptureMode(QCamera::CaptureStillImage);  //設定捕獲模式
    camera->setViewfinder(viewfinder);                   //設置取景器
    camera->start();

    //刪除前相機的所有分辨率內容
    for (int i = 0; i < mResSize.size(); i++) {
           ui->resolutionSel->removeItem(0);
    }

    //添加新相機的所有分辨率
    mResSize.clear();
    //qDebug() << "now mResSize = " << mResSize;
    mResSize = camera->supportedViewfinderResolutions();
    for (const QSize &msize:mResSize) {
           qDebug() << msize; //攝像頭支持分辨率打印
           ui->resolutionSel->addItem(QString::number(msize.width(), 10) + "*" + QString::number(msize.height(), 10));
    }
    ui->resolutionSel->setCurrentIndex(0);
});

選擇分辨率

connect(ui->resolutionSel, QOverload<int>::of(&QComboBox::activated), [=](int index){
    //qDebug() << "Index" << ui->resolutionSel->currentIndex() << ": " << ui->resolutionSel->currentText();
    //qDebug() << "mResSize:" << mResSize[index];
    //重新設置攝像頭參數
    QCameraViewfinderSettings reset;
    reset.setResolution(mResSize[index]);
    camera->setViewfinderSettings(reset);
});

截圖按鈕

connect(ui->screenShot, &QPushButton::clicked, [=](){
    camera->setCaptureMode(QCamera::CaptureStillImage);
    delete imageCapture;
    imageCapture = new QCameraImageCapture(camera);
    QString fileName = QFileDialog::getSaveFileName();
    camera->searchAndLock();
    imageCapture->capture(fileName);
    camera->unlock();
});

最終效果

附完整代碼

widget.h

#ifndef WIDGET_H
#define WIDGET_H

#include <QWidget>

QT_BEGIN_NAMESPACE
namespace Ui { class Widget; }
QT_END_NAMESPACE

class QCamera;
class QCameraViewfinder;
class QCameraImageCapture;
class QCameraInfo;
class QCameraViewfinderSettings;

class Widget : public QWidget
{
    Q_OBJECT

public:
    Widget(QWidget *parent = nullptr);
    ~Widget();

private:
    Ui::Widget *ui;
    QCamera *camera;                   //相機
    QCameraViewfinder *viewfinder;     //取景器
    QCameraImageCapture *imageCapture; //圖像捕獲
    QList<QCameraInfo> cameras;        //相機列表
    QList<QSize> mResSize = {};        //分辨率列表
    //QCameraViewfinderSettings *set;
};
#endif // WIDGET_H

widget.cpp

#include "widget.h"
#include "ui_widget.h"
#include <QCamera>
#include <QCameraInfo>
#include <QCameraViewfinder>
#include <QCameraImageCapture>
#include <QFileDialog>
#include <QList>
#include <QDebug>

Widget::Widget(QWidget *parent)
    : QWidget(parent)
    , ui(new Ui::Widget)
{
    ui->setupUi(this);
    setWindowTitle("Camera");
    setFixedSize(600,400);

    cameras = QCameraInfo::availableCameras();   //獲取所有相機的列表
    //qDebug() << "this is camera: ";
    if (cameras.count() > 0) {
        for(const QCameraInfo &cameraInfo:cameras) {
            qDebug() << cameraInfo.description();
        }
        camera = new QCamera(cameras.at(0));     //初始化實例化一個相機對象
    }

    //設置取景器
    viewfinder = new QCameraViewfinder(this);
    camera->setViewfinder(viewfinder);
    viewfinder->resize(600,350);                 //設置取景器顯示大小
    //viewfinder->show();

    imageCapture = new QCameraImageCapture(camera);
    camera->start();                             //開啟相機

    //設置默認攝像頭參數
    QCameraViewfinderSettings set;
    set.setResolution(640, 480);                 //設置顯示分辨率
    set.setMaximumFrameRate(25);                 //設置幀率
    camera->setViewfinderSettings(set);

    //添加初始化的相機選項
    for(const QCameraInfo &cameraInfo:cameras) {
        qDebug() << "CameraInfo:" << cameraInfo;
        ui->cameraSel->addItem(cameraInfo.description());
    }
    ui->cameraSel->setCurrentIndex(0);

    //添加初始化相機的分辨率選項
    mResSize = camera->supportedViewfinderResolutions();
    //qDebug() << "mResSize = " << mResSize;
    for (const QSize &msize:mResSize) {
           qDebug() << msize; //攝像頭支持分辨率打印
           ui->resolutionSel->addItem(QString::number(msize.width(), 10) + "*" + QString::number(msize.height(), 10));
    }
    ui->resolutionSel->setCurrentIndex(0);

    //信號槽連接
    connect(ui->cameraSel, QOverload<int>::of(&QComboBox::activated), [=](int index){
        //qDebug() << "Index" << ui->cameraSel->currentIndex() << ": " << ui->cameraSel->currentText();
        camera->stop();
        delete camera;
        camera = new QCamera(cameras[index]);                //camera指向指定的攝像頭
        camera->setCaptureMode(QCamera::CaptureStillImage);  //設定捕獲模式
        camera->setViewfinder(viewfinder);                   //設置取景器
        camera->start();

        //刪除前相機的所有分辨率內容
        for (int i = 0; i < mResSize.size(); i++) {
               ui->resolutionSel->removeItem(0);
        }

        //添加新相機的所有分辨率
        mResSize.clear();
        //qDebug() << "now mResSize = " << mResSize;
        mResSize = camera->supportedViewfinderResolutions();
        for (const QSize &msize:mResSize) {
               qDebug() << msize; //攝像頭支持分辨率打印
               ui->resolutionSel->addItem(QString::number(msize.width(), 10) + "*" + QString::number(msize.height(), 10));
        }
        ui->resolutionSel->setCurrentIndex(0);
    });

    connect(ui->resolutionSel, QOverload<int>::of(&QComboBox::activated), [=](int index){
        //qDebug() << "Index" << ui->resolutionSel->currentIndex() << ": " << ui->resolutionSel->currentText();
        //qDebug() << "mResSize:" << mResSize[index];
        //重新設置攝像頭參數
        QCameraViewfinderSettings reset;
        reset.setResolution(mResSize[index]);
        camera->setViewfinderSettings(reset);
    });

    connect(ui->screenShot, &QPushButton::clicked, [=](){
        camera->setCaptureMode(QCamera::CaptureStillImage);
        delete imageCapture;
        imageCapture = new QCameraImageCapture(camera);
        QString fileName = QFileDialog::getSaveFileName();
        camera->searchAndLock();
        imageCapture->capture(fileName);
        camera->unlock();
    });
}

Widget::~Widget()
{
    delete ui;
}

到此這篇關于Qt使用QCamera實現切換相機,分辨率和圖像捕獲功能的文章就介紹到這了,更多相關Qt QCamera內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: