Mysql遷移Postgresql的實現示例
更新時間：2023年03月29日 10:09:18 作者：sqlboy-yuzhenc
本文主要介紹了Mysql遷移Postgresql的實現示例，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧
原理
Mysql抽?。簃ysql命令重定向到操作系統文件，處理成csv文件；
PG裝載：copy方式將csv文件裝載進PG。
環境準備
操作系統(Centos7)
useradd pgload
passwd pgload
mkdir -p /data/etl/mysql2pg/csv
mkdir -p /data/etl/mysql2pg/tmp
mkdir -p /data/etl/mysql2pg/log
mkdir -p /data/etl/mysql2pg/shell
chown -R pgload.pgload /data/etl
su - pgload
touch /data/etl/mysql2pg/shell/dbmysql2pgmysqlcopy
chmod +x /data/etl/mysql2pg/shell/dbmysql2pgmysqlcopy
echo 'export PATH=${PATH}:/data/etl/mysql2pg/shell
# mysqlselect作為mysql抽取數據的用戶
export MYSQLID=mysqlselect:000000@10.10.10.10:3306/etl
# pgload為PG數據裝載的用戶
export PGID=pgload:000000@10.10.10.10:5432/etl' >> ~/.bash_profile
source ~/.bash_profile
Mysql客戶端安裝
由于rpm安裝方式與系統自帶的mariadb有沖突，所以只有卸載mariadb才能通過rpm方式進行安裝；
所以，在此以壓縮包的方式進行安裝。
下載mysql客戶端，我這里下載mysql5.7.34
將下載好的壓縮包進行一次解壓得到2個文件
將 mysql-5.7.34-el7-x86_64.tar.gz 上傳至服務器
cd /usr/local rz tar -zxvf mysql-5.7.34-el7-x86_64.tar.gz mv mysql-5.7.34-el7-x86_64 mysql-client # 配置環境變量 echo 'export PATH=$PATH:/usr/local/mysql-client/bin' >> /etc/profile source /etc/profile # 測試mysql命令 mysql -uroot -h10.10.10.10 -P3306 --database etl -e "select 1 from dual;" -p
Psql客戶端安裝
cd /opt rz rpm -ivh postgresql12-libs-12.11-1PGDG.rhel7.x86_64.rpm rpm -ivh postgresql12-12.11-1PGDG.rhel7.x86_64.rpm # 測試 psql etl -h 10.10.10.10 -p 5432 -U pgload -W
數據庫用戶
Mysql
CREATE USER 'mysqlselect'@'%' IDENTIFIED BY '000000'; GRANT SELECT ON *.* TO 'mysqlselect'@'%';
PG
--普通用戶
create role yuzhenchao with login password '000000';
create schema yuzhenchao;
grant create,usage on schema yuzhenchao to yuzhenchao;
grant usage on schema yuzhenchao to public;
alter default privileges for role yuzhenchao revoke execute on functions from public;
alter default privileges in schema yuzhenchao revoke execute on functions from public;
alter default privileges in schema yuzhenchao grant select on tables to public;
alter default privileges for role yuzhenchao grant select on tables to public;
--集中用戶（即專門用來做數據裝載的用戶）
create role pgload with login password '000000' connection limit 60;
create schema pgload;
grant create,usage on schema pgload to pgload;
grant usage on schema pgload to public;
alter default privileges for role pgload revoke execute on functions from public;
alter default privileges in schema pgload revoke execute on functions from public;
alter default privileges in schema pgload grant select on tables to public;
alter default privileges for role pgload grant select on tables to public;
--普通用戶都要創建該函數
--為yuzhenchao用戶創建sp_exec函數
create or replace function yuzhenchao.sp_exec(vsql varchar)
returns void --返回空
language plpgsql
security definer --定義者權限
as $function$
begin
execute vsql;
end;
$function$
;
alter function yuzhenchao.sp_exec(varchar) owner to yuzhenchao;
grant execute on function yuzhenchao.sp_exec(varchar) to yuzhenchao,pgload;
create or replace function pgload.sp_exec(vsql varchar)
returns void --返回空
language plpgsql
security definer --定義者權限
as $function$
begin
execute vsql;
end;
$function$
;
alter function pgload.sp_exec(varchar) owner to pgload;
grant execute on function pgload.sp_exec(varchar) to pgload;
--集中用戶pgload創建該函數，新增用戶則需要增加配置重新編譯
create or replace function pgload.sp_execsql(exec_sql character varying,exec_user character varying)
returns void
language plpgsql
security definer
as $function$
/* 作者 : v-yuzhenc
* 功能 : 集中處理程序，以某用戶的權限執行某條sql語句
* exec_sql : 需要執行的sql語句
* exec_user : 需要以哪個用戶的權限執行該sql語句
* */
declare
p_user varchar := exec_user;
o_search_path varchar;
begin
--記錄原來的模式搜索路徑
execute 'show search_path;' into o_search_path;
--臨時切換模式搜索路徑
execute 'SET search_path TO '||p_user||',public,oracle';
case p_user
when 'yuzhenchao' then perform yuzhenchao.sp_exec(exec_sql);
when 'pgload' then perform pgload.sp_exec(exec_sql);
else raise exception '未配置該用戶:%',p_user;
end case;
--恢復模式搜索路徑
execute 'SET search_path TO '||o_search_path;
exception when others then
--恢復模式搜索路徑
execute 'SET search_path TO '||o_search_path;
raise exception '%',sqlerrm;
end;
$function$
;
--將對應模式的對應模式的函數給對應的模式的擁有者
alter function pgload.sp_execsql(varchar,varchar) owner to pgload;
--將對應模式的sp_exec函數授權給定義者和集中用戶execute權限
grant execute on function pgload.sp_execsql(varchar,varchar) to pgload;
空字符串處理成null
在pgload模式下建立函數
create or replace function replace_to_null(tablename character varying, schemaname character varying default ("current_user"())::character varying(64))
returns void
language plpgsql
as $function$
/* 作者 : v-yuzhenc
* 功能：掃描指定表的所有varchar和text類型的字段，將字段值為''替換成null
* tablename : 需要掃描的表名
* schemaname : 需要掃描的模式名
* */
declare
p_tablename varchar := lower(tablename);
p_schemaname varchar := lower(schemaname);
p_user varchar(64) := lower(user::varchar(64));--調用者
existbj int := 0; --存在標記
v_sql varchar; --動態sql
begin
--掃描varchar和text字段
select count(1)
into existbj
from pg_class a
inner join pg_namespace b
on (a.relnamespace = b.oid)
inner join pg_attribute c
on (a.oid = c.attrelid)
inner join pg_type d
on (c.atttypid = d.oid)
where c.attnum > 0
and d.typname in ('varchar','text')
and a.relname = p_tablename
and b.nspname = p_schemaname;
--若不存在varchar或者text字段，則不做處理
if existbj = 0 then
raise notice '%.%表不需要處理空字符串！',p_schemaname,p_tablename;
return;
end if;
--拼接處理空字符串語句
select
string_agg('update '||p_schemaname||'.'||p_tablename||'
set '||c.attname||' = null where '||c.attname||' = '''';',chr(10))
into v_sql
from pg_class a
inner join pg_namespace b
on (a.relnamespace = b.oid)
inner join pg_attribute c
on (a.oid = c.attrelid)
inner join pg_type d
on (c.atttypid = d.oid)
where c.attnum > 0
and d.typname in ('varchar','text')
and a.relname = p_tablename
and b.nspname = p_schemaname;
if p_user = p_schemaname then
execute v_sql;
execute 'analyze '||p_schemaname||'.'||p_tablename;
else
--通過集中處理程序執行動態sql
perform pgload.sp_execsql(v_sql,p_schemaname);
--分析表
perform pgload.sp_execsql('analyze '||p_schemaname||'.'||p_tablename,p_schemaname);
end if;
end;
$function$
;
導表腳本
dbmysql2pgmysqlcopy
#! /bin/bash
showuseage() {
echo "程序功能:mysql導出MYSQL數據庫表，copy方式導入PG數據庫
Useage: [dbmysql2pgmysqlcopy \${SCHEMANAME}.\${TABLENAME}]
-i [:可選，源數據庫（MYSQL）帳號:username:passwd@hostname:port/dbname，默認定義在.bash_profile \${MYSQLID},不要出現這些字符：
冒號(:)，艾特(@)，空格( )，斜杠(/)]
-j [:可選，目標數據庫（PG）帳號:username:passwd@hostname:port/dbname，默認定義在.bash_profile \${PGID},不要出現這些字符：
冒號(:)，艾特(@)，空格( )，斜杠(/)]
-o [:可選，指定需要導入到PG的schemaname,默認為MYSQL同名的schemaname(即MYSQL的數據庫名)]
-f [:可選，可指定導入表名，常用于不同數據庫或不同用戶同一表名沖突、源表改名不影響后續應用、表名追加時間參數等情況，表名暫時限
定為:英文字母（不分大小寫）、數字和任意組合，禁止使用特殊字符]
-8 [:可選，指定字符編碼導出MYSQL數據，默認utf8]
-e [:可選，指定字符編碼入庫PG，默認utf8]
-u [:可選，指定表授權其他用戶，指定且多個時使用逗號分開，如:'public'、'bss,apl'，不要有空格]
-t [:可選，(test mod)調試模式，最多導出100行記錄進行調試]
-a [:可選，指定where條件內容，如:'city_id in (0,755)'(無需轉義)]
-c [:可選，不建表，直接導數據，表結構必須存在]
-z [:可選，導完表后的追加操作]
-I [:可選，過濾字段，建表時過濾掉過濾字段，逗號分隔，例如：serv_id,\"acc_nbr\"]
-s [:可選，指定字段，建表時只導指定的字段，逗號分隔，例如：serv_id,\"acc_nbr\"]
-d [:可選，指定字段特殊處理，原字段類型不變，字段處理后的值不能超出原來的精度，全角冒號頓號分隔，'字段名1：字段處理值1、字段名2：字段處理值2'，
例如：COMPENSATETEXT：to_clob(COMPENSATETEXT)、update_time：to_date(to_char(update_time,'yyyymmdd hh24:mi:ss'),'yyyymmdd hh24:mi:ss')]
-v [:可選，指定某些字段對應PG的類型，全角冒號頓號分隔，字段名1：PG類型1、字段名2：PG類型2'，例如：COMPENSATETEXT：text、update_time：date]"
}
# 退出之前刪除臨時文件
trap "rmtmpfile" EXIT
# 進度條程序
progress() {
M=0
local MAIN_PID=$1
local MAX_SECOND=14400
local SEP_SECOND=1
if [ -n "$2" ];then
SEP_SECOND=$2
fi
if [ -n "$3" ];then
MAX_SECOND=$3
fi
local MAX_SECOND=$[${MAX_SECOND}/${SEP_SECOND}]
while [ "$(ps -p ${MAIN_PID} | wc -l)" -ne "1" ] ; do
M=$[$M+1]
echo `date '+%Y-%m-%d %H:%M:%S'`"|WAIT|$M"
if [ $M -ge ${MAX_SECOND} ];then
echo `date '+%Y-%m-%d %H:%M:%S'`"|ERROR|后臺程序處理超時"
kill $MAIN_PID
exit 2
fi
sleep ${SEP_SECOND}
done
}
function killPid(){
#根據程序的ppid獲取程序的pid
PIDS=`ps -ef|awk '{if($3=='$1'){print $2} }'`;
#殺掉父程序的pid，防止子程序被殺掉后開啟新的子程序
kill -s 9 $1
#如果獲得了pid，則以已獲得的pid作為ppid繼續進行查找
if [ -n "$PIDS" ]; then
for PID in $PIDS
do
kill -9 $PID
done
fi
}
# 數據文件目錄
CSVDIR=/data/etl/mysql2pg/csv
# 臨時文件目錄
TMPDIR=/data/etl/mysql2pg/tmp
# 日志目錄
LOGDIR=/data/etl/mysql2pg/log
# 刪除臨時文件
rmtmpfile() {
# 刪除臨時文件
# PG裝載生成的模板SQL
rm -f ${TMP_M2P_SQL}
# 模板SQL生成的PSQL腳本
rm -f ${TMP_M2P_PSQL}
# MYSQL抽取生成的模板SQL
rm -f ${TMP_TMP_SQL}
# 模板SQL生成的MYSQL抽取SQL
rm -f ${TMP_TMPO_SQL}
# csv文件路徑
rm -f ${CSVFILEPATH}
# PGSQL執行日志
rm -f ${PSQL_EXEC_LOG}
# 關閉子進程
killPid $$
}
# 檢測參數
# 沒有參數直接退出
if [ $# -eq 0 ]
then
showuseage
exit -1
fi
# 限定第一個參數
PARAM1=$1
# 分析第一個參數中是否 - 開頭
if [[ ${PARAM1} =~ ^-(.*?) ]]; then
#如果第一個參數第一個字符碰到-，
echo "dbmysql2pgmysqlcopy的第一個參數應為需要導入的MYSQL的表名！"
showuseage
exit -1
else
PARAM=${PARAM1}
fi
# MYSQL連接串
MYSQLDESC=${MYSQLID}
# PG連接串
PGDESC=${PGID}
# 調試模式
TESTMOD="-1"
# 條件
MYSQLCOND=" WHERE 1 = 1 "
# PG的schema
PGSCHEMA="-1"
# MYSQL的schema
MYSQLSCHEMA="-1"
# MYSQL的tablename
MYSQLTABLE="-1"
# PG的tablename
PGTNAME="-1"
# 授權用戶
GRANTUSER="-1"
# 建表標記 默認建表
CREATEBJ="1"
# 追加操作
EXTRAOPT="-1"
# MYSQL導出編碼
MYSQLENCODE="utf8"
# PG裝載編碼
PGENCODE="utf8"
# 字段忽略標記
IGNOREBJ="-1"
# 字段處理
COLUMNDEAL="-1"
# 指定類型
COLUMNTYPE="-1"
# 指定建為復制表
REPLICATEDBJ="-1"
# 日期處理標記
DATEFORMAT="-1"
# 指定字段
SPECIALCOLUMN="-1"
# 解析mysql表
PARAM=$1
ARRAY=(${PARAM//./ })
MYSQLSCHEMA=${ARRAY[0]}
MYSQLTABLE=${ARRAY[1]}
# 如果mysql表名被雙引號包著，則直接去掉雙引號
# 如果mysql表名沒被雙引號包著，則默認全部小寫
if [[ "$MYSQLTABLE" =~ \"(.*?)\" ]];then
MYSQLTABLE=`echo ${MYSQLTABLE} | sed -e 's/^[\"]*//g' | sed -e 's/[\"]*$//g'`
else
MYSQLTABLE=${MYSQLTABLE,,}
fi
# 如果mysql模式被雙引號包著，則直接去掉雙引號
# 如果mysql模式?jīng)]被雙引號包著，則默認小寫
if [[ "$MYSQLSCHEMA" =~ \"(.*?)\" ]];then
MYSQLSCHEMA=`echo ${MYSQLSCHEMA} | sed -e 's/^[\"]*//g' | sed -e 's/[\"]*$//g'`
else
MYSQLSCHEMA=${MYSQLSCHEMA,,}
fi
# 參數后移
shift
while getopts :i:j:f:o:8:e:u:t:a:cz:I:s:d:v: OPTS; do
case "$OPTS" in
i)
MYSQLDESC="$OPTARG"
;;
j)
PGDESC="$OPTARG"
;;
o)
PGSCHEMA="${OPTARG}"
;;
f)
PGTNAME="${OPTARG}"
;;
u)
GRANTUSER="${OPTARG}"
;;
t)
if [ $OPTARG -gt 0 -a $OPTARG -le 100 ];then
TESTMOD="$OPTARG"
fi
;;
a)
MYSQLCOND=`echo " WHERE $OPTARG" | sed "s/'/''/g"`
;;
c)
CREATEBJ=-1
;;
z)
EXTRAOPT="$OPTARG"
;;
8)
MYSQLENCODE="$OPTARG"
;;
e)
PGENCODE="$OPTARG"
;;
I)
IGNOREBJ="$OPTARG"
;;
s)
SPECIALCOLUMN="$OPTARG"
;;
d)
COLUMNDEAL="$OPTARG"
;;
v)
COLUMNTYPE="$OPTARG"
;;
:)
echo "$0 必須為 -$OPTARG 添加一個參數!"
exit -1
;;
?)
showuseage
exit -1
;;
esac
done
# 解析mysql連接串
ARRAY2=(${MYSQLDESC//@/ })
USERPWD=${ARRAY2[0]}
ARR4=(${USERPWD//:/ })
MYSQLUSER=${ARR4[0]}
MYSQLPWD=${ARR4[1]}
HPDB=${ARRAY2[1]}
ARR5=(${HPDB//:/ })
MYSQLHOST=${ARR5[0]}
PDB=${ARR5[1]}
ARR6=(${PDB//// })
MYSQLPORT=${ARR6[0]}
MYSQLDB=${ARR6[1]}
export MYSQL_PWD=$MYSQLPWD
MYSQLCONN="mysql -u$MYSQLUSER -h$MYSQLHOST -P$MYSQLPORT --database $MYSQLDB"
#分隔符
PGCSEP=","
PGQSEP='"'
PGESCAPE='\'
# 獲取當前時間戳
TIMEST=`date +%Y%m%d%H%M%S`
# 日志路徑
LOG_M2P_OUT=${LOGDIR}/m2p_${MYSQLSCHEMA}_${MYSQLTABLE}_$TIMEST.out
# copy語句的輸出路徑
TMP_COPY_OUT=${TMPDIR}/copy_${MYSQLSCHEMA}_${MYSQLTABLE}_$TIMEST.out
# PG裝載生成的模板SQL
TMP_M2P_SQL=${TMPDIR}/m2p_${MYSQLSCHEMA}_${MYSQLTABLE}_$TIMEST.sql
# 模板SQL生成的PSQL腳本
TMP_M2P_PSQL=${TMPDIR}/m2p_${MYSQLSCHEMA}_${MYSQLTABLE}_$TIMEST.psql
# MYSQL抽取生成的模板SQL
TMP_TMP_SQL=${TMPDIR}/tmp_${MYSQLSCHEMA}_${MYSQLTABLE}_$TIMEST.sql
# 模板SQL生成的MYSQL抽取SQL
TMP_TMPO_SQL=${TMPDIR}/tmpo_${MYSQLSCHEMA}_${MYSQLTABLE}_$TIMEST.sql
# csv文件路徑
CSVFILEPATH=${CSVDIR}/${MYSQLSCHEMA}_${MYSQLTABLE}_$TIMEST.csv
# PGSQL執行日志
PSQL_EXEC_LOG=${LOGDIR}/PG_${MYSQLSCHEMA}_${MYSQLTABLE}_$TIMEST.out
# 判斷是否有表
tablebj=`${MYSQLCONN} -e "select 1 from information_schema.tables where table_name = '${MYSQLTABLE}' and table_schema = '${MYSQLSCHEMA}' union all select 1 from information_schema.views where table_name = '${MYSQLTABLE}' and table_schema = '${MYSQLSCHEMA}';" | sed '1d'`
if [ -z "$tablebj" ];then
echo `date '+%Y-%m-%d %H:%M:%S'`"|ERROR|表或視圖不存在"
echo `date '+%Y-%m-%d %H:%M:%S'`"|ERROR|程序異常結束"
exit -1
fi
# 調試模式處理
if [ ! $TESTMOD = "-1" ];then
MYSQLCOND="${MYSQLCOND} limit ${TESTMOD}"
fi
# PGSCHEMA處理
# 如果PGSCHEMA等于"-1",則默認使用mysql同名schema
if [ "$PGSCHEMA" = "-1" ];then
PGSCHEMA=${MYSQLSCHEMA}
fi
# PGTNAME處理
# 如果PGTNAME等于"-1",則默認與源表同名
if [ "$PGTNAME" = "-1" ];then
PGTNAME=${MYSQLTABLE}
fi
# 如果PG表名被雙引號包著，則直接去掉雙引號
# 如果PG表名沒被雙引號包著，則轉為小寫
if [[ "$PGTNAME" =~ \"(.*?)\" ]];then
PGTNAME=`echo ${PGTNAME} | sed -e 's/^[\"]*//g' | sed -e 's/[\"]*$//g'`
else
PGTNAME=${PGTNAME,,}
fi
# 如果PG模式被雙引號包著，則直接去掉雙引號
# 如果PG模式?jīng)]被雙引號包著，則轉為小寫
if [[ "$PGSCHEMA" =~ \"(.*?)\" ]];then
PGSCHEMA=`echo ${PGSCHEMA} | sed -e 's/^[\"]*//g' | sed -e 's/[\"]*$//g'`
else
PGSCHEMA=${PGSCHEMA,,}
fi
# 解析PG連接串
ARRAY1=(${PGDESC//@/ })
USERPWD=${ARRAY1[0]}
ARR1=(${USERPWD//:/ })
PGUSER=${ARR1[0]}
PGPWD=${ARR1[1]}
HPDB=${ARRAY1[1]}
ARR2=(${HPDB//:/ })
PGHOST=${ARR2[0]}
PDB=${ARR2[1]}
ARR3=(${PDB//// })
PGPORT=${ARR3[0]}
PGDB=${ARR3[1]}
export PGPASSWORD="$PGPWD"
PGCONN="psql -d $PGDB -U $PGUSER -h $PGHOST -p $PGPORT"
# 格式化過濾字段
if [ "$IGNOREBJ" != "-1" ];then
IGNOREBJ_ARR=(${IGNOREBJ//,/ })
for I in "${!IGNOREBJ_ARR[@]}"
do
TMP=${IGNOREBJ_ARR[$I]}
if [[ "$TMP" =~ \"(.*?)\" ]];then
TMP="'`echo ${TMP} | sed -e 's/^[\"]*//g' | sed -e 's/[\"]*$//g'`'"
else
TMP="'${TMP,,}'"
fi
if [ $I -eq 0 ];then
IGNOREBJ="$TMP"
else
IGNOREBJ="$TMP,${IGNOREBJ}"
fi
done
IGNOREBJ="column_name not in (${IGNOREBJ}) and "
else
IGNOREBJ=" "
fi
# 格式化指定字段
if [ "$SPECIALCOLUMN" != "-1" ];then
SPECIALCOLUMN_ARR=(${SPECIALCOLUMN//,/ })
for I in "${!SPECIALCOLUMN_ARR[@]}"
do
TMP=${SPECIALCOLUMN_ARR[$I]}
if [[ "$TMP" =~ \"(.*?)\" ]];then
TMP="'`echo ${TMP} | sed -e 's/^[\"]*//g' | sed -e 's/[\"]*$//g'`'"
else
TMP="'${TMP,,}'"
fi
if [ $I -eq 0 ];then
SPECIALCOLUMN="$TMP"
else
SPECIALCOLUMN="$TMP,${SPECIALCOLUMN}"
fi
done
SPECIALCOLUMN="column_name in (${SPECIALCOLUMN}) and "
else
SPECIALCOLUMN=" "
fi
# 判斷PGUSER和PGSCHEMA是否一致
# 如果不一致，需要調用對方的權限執行psql
if [ "$PGUSER" = "$PGSCHEMA" ];then
USERSCHEMABJ="1"
else
USERSCHEMABJ="-1"
fi
# 創建日志
rm -f ${LOG_M2P_OUT}
touch ${LOG_M2P_OUT}
# 寫入日志
echo `date '+%Y-%m-%d %H:%M:%S'`"|INFO|導表準備開始" | tee -a ${LOG_M2P_OUT}
echo `date '+%Y-%m-%d %H:%M:%S'`"|INFO|拼接數據抽取腳本開始" | tee -a ${LOG_M2P_OUT}
rm -f ${TMP_TMP_SQL}
touch ${TMP_TMP_SQL}
rm -f ${TMP_TMPO_SQL}
touch ${TMP_TMPO_SQL}
#拼接導表語句
cat>${TMP_TMP_SQL}<<eof
select
'select ' dbsql
from
information_schema.tables
where
table_name = '${MYSQLTABLE}'
and table_schema = '${MYSQLSCHEMA}';
eof
${MYSQLCONN} < ${TMP_TMP_SQL} | sed '1d' >> ${TMP_TMPO_SQL}
cat>${TMP_TMP_SQL}<<eof
select
columnname
from
(
select
concat(' ', case when ordinal_position = 1 then '' else ',' end, '\`', lower(column_name), '\`') columnname
,ordinal_position
from
information_schema.columns
where ${IGNOREBJ} ${SPECIALCOLUMN}
table_name = '${MYSQLTABLE}'
and table_schema = '${MYSQLSCHEMA}'
order by
ordinal_position
) a;
eof
${MYSQLCONN} < ${TMP_TMP_SQL} | sed '1d' >> ${TMP_TMPO_SQL}
cat>${TMP_TMP_SQL}<<eof
select
'from \`${MYSQLSCHEMA}\`.\`${MYSQLTABLE}\`'
from
information_schema.tables
where
table_name = '${MYSQLTABLE}'
and table_schema = '${MYSQLSCHEMA}'
union all
select
'${MYSQLCOND}'
from
information_schema.tables
where
table_name = '${MYSQLTABLE}'
and table_schema = '${MYSQLSCHEMA}';
eof
${MYSQLCONN} < ${TMP_TMP_SQL} | sed '1d' >> ${TMP_TMPO_SQL}
#字段特殊處理替換
#COMPENSATETEXT：to_clob(COMPENSATETEXT)、update_time：to_date(to_char(update_time,'yyyymmdd hh24:mi:ss'),'yyyymmdd hh24:mi:ss')
COLUMNNAME=""
ORIGINROW=""
REPLACEROW=""
REPLACEROWNUM=""
OLD_IFS="$IFS"
if [ "$COLUMNDEAL" != "-1" ];then
IFS="、"
COLUMNDEAL_ARRAY=(${COLUMNDEAL})
for I in "${!COLUMNDEAL_ARRAY[@]}"
do
ORIGINROW=""
REPLACEROW=""
TMP=${COLUMNDEAL_ARRAY[$I]}
IFS="："
TMP_ARRAY=(${TMP})
for J in "${!TMP_ARRAY[@]}"
do
TMP1=${TMP_ARRAY[$J]}
if [ $J -eq 0 ];then
if [[ "$TMP1" =~ \"(.*?)\" ]];then
COLUMNNAME=${TMP1}
ORIGINROW=" ,\`${TMP1}\`"
else
COLUMNNAME="\`${TMP1,,}\`"
ORIGINROW=" ,\`${TMP1,,}\`"
fi
else
REPLACEROW="${REPLACEROW}${TMP1}"
if [ $J -eq $[${#TMP_ARRAY[*]}-1] ];then
REPLACEROW=${REPLACEROW}' AS '${COLUMNNAME}
fi
fi
done
REPLACEROWNUM=`awk "/${ORIGINROW}/{print NR;exit;}" ${TMP_TMPO_SQL}`
if [ ${REPLACEROWNUM} -eq 2 ];then
REPLACEROW=' '$REPLACEROW
else
REPLACEROW=' ,'$REPLACEROW
fi
ORIGINROW=`sed -n "${REPLACEROWNUM}p" ${TMP_TMPO_SQL}`
#雙引號和斜杠轉義
ORIGINROW=${ORIGINROW//\"/\\\"}
REPLACEROW=${REPLACEROW//\"/\\\"}
ORIGINROW=${ORIGINROW//\//\\\/}
REPLACEROW=${REPLACEROW//\//\\\/}
sed -i "s/$ORIGINROW/$REPLACEROW/g" ${TMP_TMPO_SQL}
done
fi
IFS="$OLD_IFS"
echo `date '+%Y-%m-%d %H:%M:%S'`"|INFO|拼接數據抽取腳本完成" | tee -a ${LOG_M2P_OUT}
echo `date '+%Y-%m-%d %H:%M:%S'`"|INFO|輸出MYSQL腳本" | tee -a ${LOG_M2P_OUT}
cat ${TMP_TMPO_SQL} | tee -a ${LOG_M2P_OUT}
echo `date '+%Y-%m-%d %H:%M:%S'`"|INFO|拼接PG的數據裝載腳本開始" | tee -a ${LOG_M2P_OUT}
rm -f ${TMP_M2P_SQL}
touch ${TMP_M2P_SQL}
cat>${TMP_M2P_SQL}<<EOF
select
case when '${USERSCHEMABJ}' = '-1' then 'select pgload.sp_execsql(\$\$' else '--自己導表無須調用pgload' end psql
from dual
union all
select 'drop table if exists "${PGSCHEMA}"."m2p_${PGTNAME}";' psql
from information_schema.tables
where table_name = '${MYSQLTABLE}'
and table_schema = '${MYSQLSCHEMA}'
union all
select 'create table "${PGSCHEMA}"."m2p_${PGTNAME}" ('
from information_schema.tables
where table_name = '${MYSQLTABLE}'
and table_schema = '${MYSQLSCHEMA}';
EOF
${MYSQLCONN} < ${TMP_M2P_SQL} | sed '1d' >> ${TMP_M2P_PSQL}
cat>${TMP_M2P_SQL}<<EOF
select columnname
from (
select concat(' ',case when ordinal_position = 1 then '' else ',' end,'"',lower(column_name),'"',' ',
case when data_type = 'int' then data_type
when data_type = 'varchar' then replace (column_type,'varchar(0)','varchar(1)')
when data_type = 'char' then replace(replace(column_type,'char','varchar'),'varchar(0)','varchar(1)')
when data_type = 'date' then 'date'
when data_type = 'datetime' then replace (column_type, data_type, 'timestamp')
when data_type = 'timestamp' then 'timestamp'
when data_type = 'bigint' then 'bigint'
when data_type = 'double' then 'double precision'
when data_type = 'smallint' then 'smallint'
when data_type = 'decimal' then replace (column_type,'unsigned zerofill','')
when data_type = 'longtext' then 'text'
when data_type = 'text' then 'text'
when data_type = 'tinyint' then 'int'
when data_type = 'longblob' then 'bytea'
when data_type = 'blob' then 'bytea'
when data_type = 'float' then 'real'
when data_type = 'tinytext' then 'text'
when data_type = 'mediumtext' then 'text'
when data_type = 'numeric' then 'numeric'
when data_type = 'time' then 'interval'
else 'varchar'
end
) columnname
,ordinal_position
from information_schema.columns
where ${IGNOREBJ} ${SPECIALCOLUMN} table_name = '${MYSQLTABLE}'
and table_schema = '${MYSQLSCHEMA}'
order by ordinal_position
) a;
EOF
${MYSQLCONN} < ${TMP_M2P_SQL} | sed '1d' >> ${TMP_M2P_PSQL}
cat>${TMP_M2P_SQL}<<EOF
select PGPRI from (
select
case when primarykey is not null then concat(' ,primary key (',primarykey,'));') else '); ' end PGPRI
from (
select
group_concat(case when column_key = 'PRI' then concat('"',lower(column_name),'"') else null end order by ORDINAL_POSITION separator ',') primarykey
from information_schema.tables a, information_schema.columns b
where a.table_name = b.table_name
and a.table_schema = b.table_schema
and a.table_name = '${MYSQLTABLE}'
and a.table_schema = '${MYSQLSCHEMA}'
group by table_rows
) a
) a
union all
select
concat('comment on table "${PGSCHEMA}"."m2p_${PGTNAME}" is ''',replace(table_comment,'''',''''''),''';')
from information_schema.tables
where table_name = '${MYSQLTABLE}'
and table_schema = '${MYSQLSCHEMA}'
and table_comment != ''
and table_comment is not null
union all
select
concat('comment on column "${PGSCHEMA}"."m2p_${PGTNAME}"."',lower(column_name),'" is ''',replace(column_comment,'''',''''''),''';')
from information_schema.columns
where table_name = '${MYSQLTABLE}'
and table_schema = '${MYSQLSCHEMA}'
and column_comment != ''
and column_comment is not null
UNION ALL
select
'\$\$,\$\$${PGSCHEMA}\$\$);'
from dual
where
'${USERSCHEMABJ}' = '-1'
union all
select
'select pgload.sp_execsql(\$\$grant insert on table "${PGSCHEMA}"."m2p_${PGTNAME}" to "${PGUSER}";\$\$,\$\$${PGSCHEMA}\$\$);'
from dual
where
'${USERSCHEMABJ}' = '-1';
EOF
${MYSQLCONN} < ${TMP_M2P_SQL} | sed '1d' >> ${TMP_M2P_PSQL}
cat>>${TMP_M2P_PSQL}<<eof
\\copy "${PGSCHEMA}"."m2p_${PGTNAME}" FROM '${CSVFILEPATH}' WITH ( FORMAT csv,HEADER true,DELIMITER '${PGCSEP}',QUOTE '${PGQSEP}',ESCAPE '${PGESCAPE}');
eof
cat>${TMP_M2P_SQL}<<EOF
select
'select pgload.sp_execsql(\$\$' pgsql
from
dual
where
'${USERSCHEMABJ}' = '-1'
and '${CREATEBJ}' = '-1'
union all
select
'insert into "${PGSCHEMA}"."${PGTNAME}" (' insertsql
from
information_schema.tables
where
table_name = '${MYSQLTABLE}'
and table_schema = '${MYSQLSCHEMA}'
and '${CREATEBJ}' = '-1';
EOF
${MYSQLCONN} < ${TMP_M2P_SQL} | sed '1d' >> ${TMP_M2P_PSQL}
cat>${TMP_M2P_SQL}<<EOF
select
columnname
from
(
select
concat(' ', case when ordinal_position = 1 then '' else ',' end, '"', lower(column_name), '"') columnname
,ordinal_position
from
information_schema.columns
where ${IGNOREBJ} ${SPECIALCOLUMN}
table_name = '${MYSQLTABLE}'
and table_schema = '${MYSQLSCHEMA}'
order by
ordinal_position
) a
where '${CREATEBJ}' = '-1';
EOF
${MYSQLCONN} < ${TMP_M2P_SQL} | sed '1d' >> ${TMP_M2P_PSQL}
cat>${TMP_M2P_SQL}<<EOF
select
')' insertsql
from
information_schema.tables
where
table_name = '${MYSQLTABLE}'
and table_schema = '${MYSQLSCHEMA}'
and '${CREATEBJ}' = '-1'
union all
select
'select ' insertsql
from
information_schema.tables
where
table_name = '${MYSQLTABLE}'
and table_schema = '${MYSQLSCHEMA}'
and '${CREATEBJ}' = '-1';
EOF
${MYSQLCONN} < ${TMP_M2P_SQL} | sed '1d' >> ${TMP_M2P_PSQL}
cat>${TMP_M2P_SQL}<<EOF
select
columnname
from
(
select
concat(' ', case when ordinal_position = 1 then '' else ',' end, '"', lower(column_name), '"') columnname
,ordinal_position
from
information_schema.columns
where ${IGNOREBJ} ${SPECIALCOLUMN}
table_name = '${MYSQLTABLE}'
and table_schema = '${MYSQLSCHEMA}'
order by
ordinal_position
) a
where '${CREATEBJ}' = '-1';
EOF
${MYSQLCONN} < ${TMP_M2P_SQL} | sed '1d' >> ${TMP_M2P_PSQL}
cat>${TMP_M2P_SQL}<<EOF
select
'from "${PGSCHEMA}"."m2p_${PGTNAME}";'
from
information_schema.tables
where
table_name = '${MYSQLTABLE}'
and table_schema = '${MYSQLSCHEMA}'
and '${CREATEBJ}' = '-1'
union all
select
'\$\$,\$\$${PGSCHEMA}\$\$);'
from
dual
where
'${USERSCHEMABJ}' = '-1'
and '${CREATEBJ}' = '-1'
union all
select
'drop table if exists "${PGSCHEMA}"."${PGTNAME}";'
from dual
where '${CREATEBJ}' = '1'
and '${USERSCHEMABJ}' = '1'
union all
select
'select pgload.sp_execsql(\$\$drop table if exists "${PGSCHEMA}"."${PGTNAME}";\$\$,\$\$${PGSCHEMA}\$\$);'
from dual
where '${CREATEBJ}' = '1'
and '${USERSCHEMABJ}' = '-1'
union all
select
'alter table "${PGSCHEMA}"."m2p_${PGTNAME}" rename to "${PGTNAME}";'
from dual
where '${CREATEBJ}' = '1'
and '${USERSCHEMABJ}' = '1'
union all
select
'select pgload.sp_execsql(\$\$alter table "${PGSCHEMA}"."m2p_${PGTNAME}" rename to "${PGTNAME}";\$\$,\$\$${PGSCHEMA}\$\$);'
from dual
where '${CREATEBJ}' = '1'
and '${USERSCHEMABJ}' = '-1'
union all
select
'drop table if exists "${PGSCHEMA}"."m2p_${PGTNAME}";'
from dual
where '${CREATEBJ}' = '-1'
and '${USERSCHEMABJ}' = '1'
union all
select
'select pgload.sp_execsql(\$\$drop table if exists "${PGSCHEMA}"."m2p_${PGTNAME}";\$\$,\$\$${PGSCHEMA}\$\$);'
from dual
where '${CREATEBJ}' = '-1'
and '${USERSCHEMABJ}' = '-1'
union all
select
'grant select on table "${PGSCHEMA}"."${PGTNAME}" to ${GRANTUSER};'
from dual
where '${GRANTUSER}' <> '-1'
and '${USERSCHEMABJ}' = '1'
union all
select
'select pgload.sp_execsql(\$\$grant select on table "${PGSCHEMA}"."${PGTNAME}" to "${GRANTUSER}";\$\$,\$\$${PGSCHEMA}\$\$);'
from dual
where '${GRANTUSER}' <> '-1'
and '${USERSCHEMABJ}' = '-1'
union all
select
'${EXTRAOPT}'
from dual
where '${EXTRAOPT}' <> '-1'
and '${USERSCHEMABJ}' = '1'
union all
select
'select pgload.sp_execsql(\$\$${EXTRAOPT}\$\$,\$\$${PGSCHEMA}\$\$);'
from dual
where '${EXTRAOPT}' <> '-1'
and '${USERSCHEMABJ}' = '-1'
union all
select
'select pgload.replace_to_null(\$\$${PGTNAME}\$\$,\$\$${PGSCHEMA}\$\$);'
from dual
union all
select
'analyze "${PGSCHEMA}"."${PGTNAME}";'
from dual
where '${USERSCHEMABJ}' = '1'
union all
select
'select pgload.sp_execsql(\$\$analyze "${PGSCHEMA}"."${PGTNAME}";\$\$,\$\$${PGSCHEMA}\$\$);'
from dual
where '${USERSCHEMABJ}' = '-1';
EOF
${MYSQLCONN} < ${TMP_M2P_SQL} | sed '1d' >> ${TMP_M2P_PSQL}
#指定字段類型
OLD_IFS="$IFS"
if [ "$COLUMNTYPE" != "-1" ];then
IFS="、"
COLUMNTYPE_ARRAY=(${COLUMNTYPE})
for I in "${!COLUMNTYPE_ARRAY[@]}"
do
ORIGINROW=""
REPLACEROW=""
TMP=${COLUMNTYPE_ARRAY[$I]}
IFS="："
TMP_ARRAY=(${TMP})
for J in "${!TMP_ARRAY[@]}"
do
TMP1=${TMP_ARRAY[$J]}
if [ $J -eq 0 ];then
if [[ "$TMP1" =~ \"(.*?)\" ]];then
COLUMNNAME=${TMP1}
ORIGINROW=",${TMP1}"
else
COLUMNNAME="\"${TMP1,,}\""
ORIGINROW=",\"${TMP1,,}\""
fi
else
REPLACEROW="${REPLACEROW}${TMP1}"
if [ $J -eq $[${#TMP_ARRAY[*]}-1] ];then
REPLACEROW="${COLUMNNAME} ${REPLACEROW}"
fi
fi
done
REPLACEROWNUM=`awk "/${COLUMNNAME}/{print NR;exit;}" ${TMP_M2P_PSQL}`
if [ $REPLACEROWNUM -eq 4 ];then
REPLACEROW=' '$REPLACEROW
else
REPLACEROW=' ,'$REPLACEROW
fi
ORIGINROW=`sed -n "${REPLACEROWNUM}p" ${TMP_M2P_PSQL}`
#雙引號和斜杠轉義
ORIGINROW=${ORIGINROW//\"/\\\"}
REPLACEROW=${REPLACEROW//\"/\\\"}
ORIGINROW=${ORIGINROW//\//\\\/}
REPLACEROW=${REPLACEROW//\//\\\/}
#echo $ORIGINROW
#echo $REPLACEROW
#echo $REPLACEROWNUM
sed -i "s/$ORIGINROW/$REPLACEROW/g" ${TMP_M2P_PSQL}
done
fi
IFS="$OLD_IFS"
echo `date '+%Y-%m-%d %H:%M:%S'`"|INFO|拼接PG的數據裝載腳本完成" | tee -a ${LOG_M2P_OUT}
echo `date '+%Y-%m-%d %H:%M:%S'`"|INFO|輸出PSQL腳本" | tee -a ${LOG_M2P_OUT}
cat ${TMP_M2P_PSQL} | tee -a ${LOG_M2P_OUT}
echo `date '+%Y-%m-%d %H:%M:%S'`"|INFO|導表準備完成" | tee -a ${LOG_M2P_OUT}
#開始抽取數據
echo `date '+%Y-%m-%d %H:%M:%S'`"|INFO|從MYSQL抽取數據開始" | tee -a ${LOG_M2P_OUT}
rm -f ${CSVFILEPATH}
touch ${CSVFILEPATH}
extractmysqldata(){
# ${MYSQLCONN} < ${TMP_TMPO_SQL} | sed "s/\x00//g;s/\\\n/\n/g;s/${PGQSEP}/\\""${PGESCAPE}${PGQSEP}/g;s/\t/${PGQSEP}${PGCSEP}${PGQSEP}/g;s/^/${PGQSEP}&/g;s/$/&${PGQSEP}/g;s/${PGQSEP}NULL${PGQSEP}//g;s/${PGQSEP}${PGQSEP}//g;s/\\\t/\t/g" > ${CSVFILEPATH}
${MYSQLCONN} < ${TMP_TMPO_SQL} | sed "s/\x00//g;s/\\\n/\n/g;s/${PGQSEP}/\\""${PGESCAPE}${PGQSEP}/g;s/\t/${PGQSEP}${PGCSEP}${PGQSEP}/g;s/^/${PGQSEP}&/g;s/$/&${PGQSEP}/g;s/${PGQSEP}NULL${PGQSEP}//g;s/\\\t/\t/g" > ${CSVFILEPATH}
}
extractmysqldata &
EXTRACTMYSQLDATA_PID=$(jobs -p | tail -1)
progress "${EXTRACTMYSQLDATA_PID}" &
EXTRACTMYSQLDATA_PPID=$(jobs -p | tail -1)
wait "${EXTRACTMYSQLDATA_PID}"
echo `date '+%Y-%m-%d %H:%M:%S'`"|INFO|從MYSQL抽取數據完成" | tee -a ${LOG_M2P_OUT}
echo `date '+%Y-%m-%d %H:%M:%S'`"|INFO|在PG中裝載數據開始" | tee -a ${LOG_M2P_OUT}
loadmysqldata(){
#執行psql建表腳本
${PGCONN} >>${PSQL_EXEC_LOG} 2>&1 <<PSQL
\set ECHO all
\timing on
\! echo `date "+%Y %m %d %H:%M:%S"`
\i ${TMP_M2P_PSQL}
\! echo `date "+%Y %m %d %H:%M:%S"`
PSQL
}
loadmysqldata &
LOADMYSQLDATA_PID=$(jobs -p | tail -1)
progress "${LOADMYSQLDATA_PID}" &
LOADMYSQLDATA_PPID=$(jobs -p | tail -1)
wait "${LOADMYSQLDATA_PID}"
echo `date '+%Y-%m-%d %H:%M:%S'`"|INFO|在PG中裝載數據完成" | tee -a ${LOG_M2P_OUT}
echo `date '+%Y-%m-%d %H:%M:%S'`"|INFO|輸出裝載日志" | tee -a ${LOG_M2P_OUT}
cat ${PSQL_EXEC_LOG} | tee -a ${LOG_M2P_OUT}
echo `date '+%Y-%m-%d %H:%M:%S'`"|INFO|導表日志：${LOG_M2P_OUT}" | tee -a ${LOG_M2P_OUT}
#獲取PG裝載的記錄數
ERRORBJ=`cat ${LOG_M2P_OUT} | grep '^psql:' | grep -E 'FATAL:|ERROR:' | wc -l`
if [ ${ERRORBJ} -ne 0 ];then
echo `date '+%Y-%m-%d %H:%M:%S'`"|INFO|數據導入失敗" | tee -a ${LOG_M2P_OUT}
exit -1
else
PGNUM=`awk '{if($1=="COPY") print $2}' ${PSQL_EXEC_LOG}`
echo `date '+%Y-%m-%d %H:%M:%S'`"|INFO|數據導入成功：${PGNUM}" | tee -a ${LOG_M2P_OUT}
fi
測試
在mysql中建表
create table tmp (
id int primary key comment '主鍵'
,name varchar(50) comment '姓名'
);
insert into tmp values (1,'張三');
insert into tmp values (2,'李四');
insert into tmp values (3,'王五');
insert into tmp values (4,'你好，'' "
我不好 1111');
導表測試
[root@yzcdb-2 ~]# su - pgload
Last login: Tue Mar 7 08:56:24 CST 2023 on pts/0
[pgload@yzcdb-2 ~]$ dbmysql2pgmysqlcopy etl.tmp -o yuzhenchao
2023-03-07 14:02:12|INFO|導表準備開始
2023-03-07 14:02:12|INFO|拼接數據抽取腳本開始
2023-03-07 14:02:12|INFO|拼接數據抽取腳本完成
2023-03-07 14:02:12|INFO|輸出MYSQL腳本
select
`id`
,`name`
from `etl`.`tmp`
WHERE 1 = 1
2023-03-07 14:02:12|INFO|拼接PG的數據裝載腳本開始
2023-03-07 14:02:12|INFO|拼接PG的數據裝載腳本完成
2023-03-07 14:02:12|INFO|輸出PSQL腳本
select pgload.sp_execsql($$
drop table if exists "yuzhenchao"."m2p_tmp";
create table "yuzhenchao"."m2p_tmp" (
"id" int
,"name" varchar(50)
,primary key ("id"));
comment on column "yuzhenchao"."m2p_tmp"."id" is '主鍵';
comment on column "yuzhenchao"."m2p_tmp"."name" is '姓名';
$$,$$yuzhenchao$$);
select pgload.sp_execsql($$grant insert on table "yuzhenchao"."m2p_tmp" to "pgload";$$,$$yuzhenchao$$);
\copy "yuzhenchao"."m2p_tmp" FROM '/data/etl/mysql2pg/csv/etl_tmp_20230307140212.csv' WITH ( FORMAT csv,HEADER true,DELIMITER ',',QUOTE '"',ESCAPE '\');
select pgload.sp_execsql($$drop table if exists "yuzhenchao"."tmp";$$,$$yuzhenchao$$);
select pgload.sp_execsql($$alter table "yuzhenchao"."m2p_tmp" rename to "tmp";$$,$$yuzhenchao$$);
select pgload.sp_execsql($$analyze "yuzhenchao"."tmp";$$,$$yuzhenchao$$);
2023-03-07 14:02:12|INFO|導表準備完成
2023-03-07 14:02:12|INFO|從MYSQL抽取數據開始
2023-03-07 14:02:12|WAIT|1
2023-03-07 14:02:12|INFO|從MYSQL抽取數據完成
2023-03-07 14:02:12|INFO|在PG中裝載數據開始
2023-03-07 14:02:13|WAIT|1
2023-03-07 14:02:13|INFO|在PG中裝載數據完成
2023-03-07 14:02:13|INFO|輸出裝載日志
\timing on
Timing is on.
\! echo 2023 03 07 14:02:12
2023 03 07 14:02:12
\i /data/etl/mysql2pg/tmp/m2p_etl_tmp_20230307140212.psql
select pgload.sp_execsql($$
drop table if exists "yuzhenchao"."m2p_tmp";
create table "yuzhenchao"."m2p_tmp" (
"id" int
,"name" varchar(50)
,primary key ("id"));
comment on column "yuzhenchao"."m2p_tmp"."id" is '主鍵';
comment on column "yuzhenchao"."m2p_tmp"."name" is '姓名';
$$,$$yuzhenchao$$);
psql:/data/etl/mysql2pg/tmp/m2p_etl_tmp_20230307140212.psql:9: NOTICE: table "m2p_tmp" does not exist, skipping
sp_execsql
------------
(1 row)
Time: 17.889 ms
select pgload.sp_execsql($$grant insert on table "yuzhenchao"."m2p_tmp" to "pgload";$$,$$yuzhenchao$$);
sp_execsql
------------
(1 row)
Time: 1.558 ms
\copy "yuzhenchao"."m2p_tmp" FROM '/data/etl/mysql2pg/csv/etl_tmp_20230307140212.csv' WITH ( FORMAT csv,HEADER true,DELIMITER ',',QUOTE '"',ESCAPE '\');
COPY 4
Time: 32.051 ms
select pgload.sp_execsql($$drop table if exists "yuzhenchao"."tmp";$$,$$yuzhenchao$$);
sp_execsql
------------
(1 row)
Time: 3.049 ms
select pgload.sp_execsql($$alter table "yuzhenchao"."m2p_tmp" rename to "tmp";$$,$$yuzhenchao$$);
sp_execsql
------------
(1 row)
Time: 1.687 ms
select pgload.sp_execsql($$analyze "yuzhenchao"."tmp";$$,$$yuzhenchao$$);
sp_execsql
------------
(1 row)
Time: 1.848 ms
\! echo 2023 03 07 14:02:13
2023 03 07 14:02:13
2023-03-07 14:02:13|INFO|導表日志：/data/etl/mysql2pg/log/m2p_etl_tmp_20230307140212.out
2023-03-07 14:02:13|INFO|數據導入成功：4
Killed
查看pg中的表
到此這篇關于Mysql遷移Postgresql的實現示例的文章就介紹到這了,更多相關Mysql遷移Postgresql內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
這篇文章主要給大家介紹了關于Innodb中mysql快速刪除2T的大表的相關資料，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2018-08-08
今天小編就為大家分享一篇關于B-Tree的性質介紹，小編覺得內容挺不錯的，現在分享給大家，具有很好的參考價值，需要的朋友一起跟隨小編來看看吧2019-01-01
在MySQL Qurey Brower中直接導入*.sql腳本，是不能一次執行多條sql命令的，下面為大家介紹下MySQL導入導出.sql文件及常用命令2014-08-08
使用MYSQL存儲過程，可以實現諸多的功能，下面將為您介紹一個MYSQL存儲過程中使用游標的實例2014-01-01
mysql和oracle默認排序的方法 - 不指定order by
這篇文章主要介紹了mysql和oracle默認排序的方法 - 不指定order by。具有很好的參考價值，希望對大家有所幫助。如有錯誤或未考慮完全的地方，望不吝賜教2022-07-07
mysql的InnoDB,支持事務和行級鎖，可以使用行鎖來處理用戶提現等業務。使用mysql鎖的時候有時候會出現死鎖，要做好死鎖的預防。這篇文章通過實例應用給大家講解2016-12-12
用命令創建MySQL數據庫(de1)的方法
下面小編就為大家?guī)硪黄妹顒?chuàng)建MySQL數據庫(de1)的方法。小編覺得挺不錯的，現在就分享給大家，也給大家做個參考。一起跟隨小編過來看看吧2017-03-03
索引的種類眾所周知,索引類似于字典的目錄,可以提高查詢的效率,下面這篇文章主要給大家介紹了關于mysql哪些查詢情況不走索引的相關資料,文中通過實例代碼介紹的非常詳細,需要的朋友可以參考下2022-04-04
今天在MySql5.6操作時報錯：You must SET PASSWORD before executing this statement解決方法，需要的朋友可以參考下2016-11-11
Mysql報錯Duplicate?entry?'值'?for?key?'字段名&
今天在使用數據庫的過程中,發現一直報Duplicate?entry?'值'?for?key?'字段名'的錯誤,所以下面這篇文章主要給大家介紹了關于Mysql報錯Duplicate?entry?'值'?for?key?'字段名'的解決方法,需要的朋友可以參考下2023-04-04