Golang中結構體映射mapstructure庫深入詳解
在數據傳遞時,需要先編解碼;常用的方式是JSON編解碼(參見《golang之JSON處理》)。但有時卻需要讀取部分字段后,才能知道具體類型,此時就可借助mapstructure庫了。
mapstructure庫
mapstructure可方便地實現map[string]interface{}與struct間的轉換;使用前,需要先導入庫:
go get github.com/mitchellh/mapstructure
字段標簽
默認情況下,mapstructure使用字段的名稱做匹配映射(即在map中以字段名為鍵值查找字段值);注意匹配時是忽略大小寫的。也可通過標簽來設定字段映射名稱:
type Person struct {
Name string `mapstructure:"userName"`
}
內嵌結構
go中結構體是可以任意嵌套的;嵌套后即認為擁有對應的字段。但是,默認情況下mapstructure只處理當前結構定義的字段,若要自動處理內嵌字段需要添加標簽squash:
type Student struct {
Person `mapstructure:",squash"`
Age int
}
未映射字段
若源數據中有未映射的值(即結構體中無對應的字段),mapstructure默認會忽略它??梢栽诮Y(jié)構體中定義一個特殊字段(類型為map[string]interface{},且標簽要設置為mapstructure:",remain"),來存放所有未能映射的字段中。
type Student struct {
Name string
Age int
Other map[string]interface{} `mapstructure:",remain"`
}
Metadata
mapstructure中可以使用Metadata收集一些解碼時會產生的有用信息。
// mapstructure.go
type Metadata struct {
Keys []string // 解碼成功的鍵
Unused []string // 源數據中存在,但目標結構中不存在的鍵
Unset []string // 未設定的(源數據中缺失的)鍵
}
為了獲取這些信息,需要使用DecodeMetadata來解碼:
var metadata mapstructure.Metadata
err := mapstructure.DecodeMetadata(m, &p, &metadata)
弱類型輸入
有時候,并不想對結構體字段類型和map[string]interface{}的對應鍵值做強類型一致的校驗。這時可以使用WeakDecode/WeakDecodeMetadata方法,它們會嘗試做類型轉換:
- 布爾轉字符串:true = “1”, false = “0”;
- 布爾轉數字:true = 1, false = 0;
- 數字轉布爾:true if value != 0;
- 字符串轉布爾:可接受,
- 真:1, t, T, TRUE, true, True
- 假:0, f, F, FALSE, false, False
- 數字轉字符串:自動base10轉換;
- 負數轉為無符號數(上溢);
- 字符串轉數字:根據前綴(如0x等)轉換;
- 空數組與空map間互轉;
- 單個值轉為切片;
逆向轉換
除將map轉換為結構體外,mapstructure也可以將結構體反向解碼為map[string]interface{}。在反向解碼時,我們可以為某些字段設置mapstructure:“,omitempty”,當這些字段為默認值時,就不會出現在map中:
p := &Student{
Name: "Mike",
Age: 12,
}
var m map[string]interface{}
mapstructure.Decode(p, &m)
解碼器
mapstructure提供了解碼器(Decoder),可靈活方便地控制解碼:
type DecoderConfig struct {
// 若設定,則在任何解碼或類型轉換(設定了WeaklyTypedInput)前調用;對于設定了squash的內嵌字段,整體調用一次;若返回錯誤,則整個解碼失敗
DecodeHook DecodeHookFunc
// 若設定,則源數據中存在未使用字段時,報錯
ErrorUnused bool
// 若設定,則有字段未設定時,報錯
ErrorUnset bool
// 若設定,則在設定字段前先清空(對于map等類型會先清理掉舊數據)
ZeroFields bool
// 若設定,支持若類型間的轉換
WeaklyTypedInput bool
// Squash will squash embedded structs.
Squash bool
// Metadata is the struct that will contain extra metadata about
// the decoding. If this is nil, then no metadata will be tracked.
Metadata *Metadata
// Result is a pointer to the struct that will contain the decoded
// value.
Result interface{}
// The tag name that mapstructure reads for field names. This
// defaults to "mapstructure"
TagName string
// IgnoreUntaggedFields ignores all struct fields without explicit
// TagName, comparable to `mapstructure:"-"` as default behaviour.
IgnoreUntaggedFields bool
// MatchName is the function used to match the map key to the struct
// field name or tag. Defaults to `strings.EqualFold`. This can be used
// to implement case-sensitive tag values, support snake casing, etc.
MatchName func(mapKey, fieldName string) bool
}一個支持弱類型轉換的示例:要獲取的結果放到config的result中
Name string
Age int
}
func decoderConfig() {
m := map[string]interface{}{
"name": 123,
"age": "12",
"job": "programmer",
}
var p Person
var metadata mapstructure.Metadata
decoder, err := mapstructure.NewDecoder(&mapstructure.DecoderConfig{
WeaklyTypedInput: true,
Result: &p,
Metadata: &metadata,
})
if err != nil {
log.Fatal(err)
}
err = decoder.Decode(m)
if err == nil {
log.Printf("Result: %#v", p)
log.Printf("keys:%#v, unused:%#v\n", metadata.Keys, metadata.Unused)
} else {
log.Println("decode fail:", err)
}
}
示例
通過一個messageData結構,action會指示最終的data類型。接收到數據后,先解析出atcion,再根據action轉換為真實的類型。
因time.Time是一個結構體(json序列化時會轉換為時間字符串),mapstructure無法正確處理,所以推薦使用時間戳。
為了能正確解析內嵌的DataBasic,需要標記為squash。
import "github.com/mitchellh/mapstructure"
type DataBasic struct {
DataId string `json:"dataId"`
UpdateTime int64 `json:"updateTime"`
}
type AddedData struct {
DataBasic `mapstructure:",squash"`
Tag string `json:"tag"`
AddParams map[string]any `json:"addParams"`
}
type messageData struct {
Action int `json:"action"`
SeqId uint64 `json:"seqId"`
Data any `json:"data"`
}
func decodeData() {
add := &AddedData{
DataBasic: DataBasic{
DataId: "a2",
UpdateTime: time.Now().UnixMilli(),
},
Tag: "tag",
AddParams: map[string]any{"dataId": "c2", "otherId": "t2"},
}
data := &messageData{
Action: 1,
Data: add,
}
js, err := json.Marshal(data)
if err != nil {
log.Printf("marshal fail: %v", err)
return
}
got := &messageData{}
err = json.Unmarshal(js, got)
if err != nil {
log.Printf("unmarshal fail: %v", err)
return
}
param := new(AddedData)
err = mapstructure.Decode(got.Data, param)
if err != nil {
log.Printf("unmarshal fail: %v", err)
return
}
log.Printf("param: %+v", param)
}
到此這篇關于Golang中結構體映射mapstructure庫深入詳解的文章就介紹到這了,更多相關Go mapstructure內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!
相關文章
使用Golang調用攝像頭并進行圖像處理
近年來,攝像頭成為了我們生活中不可或缺的設備之一,從智能手機到安全監控系統,無處不在的攝像頭給我們帶來了便利和安全,在開發攝像頭相關的應用程序時,選擇一種高效和易用的編程語言是非常重要的,本文將介紹如何使用Golang調用攝像頭并進行圖像處理2023-11-11
Golang實現Trie(前綴樹)的示例
本文主要介紹了Golang實現Trie(前綴樹)的示例,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2023-01-01
MacOS中 VSCode 安裝 GO 插件失敗問題的快速解決方法
這篇文章主要介紹了MacOS中 VSCode 安裝 GO 插件失敗問題的快速解決方法,本文給大家介紹的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2020-05-05
Golang?HTTP服務超時控制實現原理分析
這篇文章主要介紹了Golang?HTTP服務超時控制實現原理,HTTP服務的超時控制是保障服務高可用性的重要措施之一,由于HTTP服務可能會遇到網絡延遲,資源瓶頸等問題,因此需要對請求進行超時控制,以避免服務雪崩等問題,需要的朋友可以參考下2023-05-05

