SpringBoot父子線程數據傳遞的五種方案介紹

更新時間：2022年09月19日 17:05:23 作者：π大星的日常

在實際開發過程中我們需要父子之間傳遞一些數據，比如用戶信息等。該文章從5種解決方案解決父子之間數據傳遞困擾，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習吧

方案1.ThreadLocal+TaskDecorator

用戶工具類 UserUtils

/**
 *使用ThreadLocal存儲共享的數據變量，如登錄的用戶信息
 */
public class UserUtils {
    private static  final  ThreadLocal<String> userLocal=new ThreadLocal<>();
    public static  String getUserId(){
        return userLocal.get();
    }
    public static void setUserId(String userId){
        userLocal.set(userId);
    }
    public static void clear(){
        userLocal.remove();
    }
}

自定義CustomTaskDecorator

/**
 * 線程池修飾類
 */
public class CustomTaskDecorator implements TaskDecorator {
    @Override
    public Runnable decorate(Runnable runnable) {
        // 獲取主線程中的請求信息（我們的用戶信息也放在里面）
        String robotId = UserUtils.getUserId();
        System.out.println(robotId);
        return () -> {
            try {
                // 將主線程的請求信息，設置到子線程中
                UserUtils.setUserId(robotId);
                // 執行子線程，這一步不要忘了
                runnable.run();
            } finally {
                // 線程結束，清空這些信息，否則可能造成內存泄漏
                UserUtils.clear();
            }
        };
    }
}

ExecutorConfig

在原來的基礎上增加 executor.setTaskDecorator(new CustomTaskDecorator());

@Bean(name = "asyncServiceExecutor")
    public Executor asyncServiceExecutor() {
        log.info("start asyncServiceExecutor----------------");
        //ThreadPoolTaskExecutor executor = new ThreadPoolTaskExecutor();
        //使用可視化運行狀態的線程池
        ThreadPoolTaskExecutor executor = new VisiableThreadPoolTaskExecutor();
        //配置核心線程數
        executor.setCorePoolSize(corePoolSize);
        //配置最大線程數
        executor.setMaxPoolSize(maxPoolSize);
        //配置隊列大小
        executor.setQueueCapacity(queueCapacity);
        //配置線程池中的線程的名稱前綴
        executor.setThreadNamePrefix(namePrefix);
        // rejection-policy：當pool已經達到max size的時候，如何處理新任務
        // CALLER_RUNS：不在新線程中執行任務，而是有調用者所在的線程來執行
        executor.setRejectedExecutionHandler(new ThreadPoolExecutor.CallerRunsPolicy());
        //增加線程池修飾類
        executor.setTaskDecorator(new CustomTaskDecorator());
        //增加MDC的線程池修飾類
        //executor.setTaskDecorator(new MDCTaskDecorator());
        //執行初始化
        executor.initialize();
        log.info("end asyncServiceExecutor------------");
        return executor;
    }

AsyncServiceImpl

    /**
     * 使用ThreadLocal方式傳遞
     * 帶有返回值
     * @throws InterruptedException
     */
    @Async("asyncServiceExecutor")
    public CompletableFuture<String> executeValueAsync2() throws InterruptedException {
        log.info("start executeValueAsync");
        System.out.println("異步線程執行返回結果......+");
        log.info("end executeValueAsync");
        return CompletableFuture.completedFuture(UserUtils.getUserId());
    }

Test2Controller

    /**
     * 使用ThreadLocal+TaskDecorator的方式
     * @return
     * @throws InterruptedException
     * @throws ExecutionException
     */
    @GetMapping("/test2")
    public String test2() throws InterruptedException, ExecutionException {
        UserUtils.setUserId("123456");
        CompletableFuture<String> completableFuture = asyncService.executeValueAsync2();
        String s = completableFuture.get();
        return s;
    }

方案2.RequestContextHolder+TaskDecorator

自定義CustomTaskDecorator

/**
 * 線程池修飾類
 */
public class CustomTaskDecorator implements TaskDecorator {
    @Override
    public Runnable decorate(Runnable runnable) {
        // 獲取主線程中的請求信息（我們的用戶信息也放在里面）
        RequestAttributes attributes = RequestContextHolder.getRequestAttributes();
        return () -> {
            try {
                // 將主線程的請求信息，設置到子線程中
                RequestContextHolder.setRequestAttributes(attributes);
                // 執行子線程，這一步不要忘了
                runnable.run();
            } finally {
                // 線程結束，清空這些信息，否則可能造成內存泄漏
                RequestContextHolder.resetRequestAttributes();
            }
        };
    }
}

ExecutorConfig

在原來的基礎上增加 executor.setTaskDecorator(new CustomTaskDecorator());

@Bean(name = "asyncServiceExecutor")
    public Executor asyncServiceExecutor() {
        log.info("start asyncServiceExecutor----------------");
        //ThreadPoolTaskExecutor executor = new ThreadPoolTaskExecutor();
        //使用可視化運行狀態的線程池
        ThreadPoolTaskExecutor executor = new VisiableThreadPoolTaskExecutor();
        //配置核心線程數
        executor.setCorePoolSize(corePoolSize);
        //配置最大線程數
        executor.setMaxPoolSize(maxPoolSize);
        //配置隊列大小
        executor.setQueueCapacity(queueCapacity);
        //配置線程池中的線程的名稱前綴
        executor.setThreadNamePrefix(namePrefix);
        // rejection-policy：當pool已經達到max size的時候，如何處理新任務
        // CALLER_RUNS：不在新線程中執行任務，而是有調用者所在的線程來執行
        executor.setRejectedExecutionHandler(new ThreadPoolExecutor.CallerRunsPolicy());
        //增加線程池修飾類
        executor.setTaskDecorator(new CustomTaskDecorator());
        //增加MDC的線程池修飾類
        //executor.setTaskDecorator(new MDCTaskDecorator());
        //執行初始化
        executor.initialize();
        log.info("end asyncServiceExecutor------------");
        return executor;
    }

AsyncServiceImpl

     /**
     * 使用RequestAttributes獲取主線程傳遞的數據
     * @return
     * @throws InterruptedException
     */
    @Async("asyncServiceExecutor")
    public CompletableFuture<String> executeValueAsync3() throws InterruptedException {
        log.info("start executeValueAsync");
        System.out.println("異步線程執行返回結果......+");
        RequestAttributes attributes = RequestContextHolder.getRequestAttributes();
        Object userId = attributes.getAttribute("userId", 0);
        log.info("end executeValueAsync");
        return CompletableFuture.completedFuture(userId.toString());
    }

Test2Controller

    /**
     * RequestContextHolder+TaskDecorator的方式
     * @return
     * @throws InterruptedException
     * @throws ExecutionException
     */
    @GetMapping("/test3")
    public String test3() throws InterruptedException, ExecutionException {
        RequestAttributes attributes = RequestContextHolder.getRequestAttributes();
        attributes.setAttribute("userId","123456",0);
        CompletableFuture<String> completableFuture = asyncService.executeValueAsync3();
        String s = completableFuture.get();
        return s;
    }

方案3.MDC+TaskDecorator

自定義MDCTaskDecorator

/**
 * 線程池修飾類
 */
public class MDCTaskDecorator implements TaskDecorator {
    @Override
    public Runnable decorate(Runnable runnable) {
        // 獲取主線程中的請求信息（我們的用戶信息也放在里面）
        String userId = MDC.get("userId");
        Map<String, String> copyOfContextMap = MDC.getCopyOfContextMap();
        System.out.println(copyOfContextMap);
        return () -> {
            try {
                // 將主線程的請求信息，設置到子線程中
                MDC.put("userId",userId);
                // 執行子線程，這一步不要忘了
                runnable.run();
            } finally {
                // 線程結束，清空這些信息，否則可能造成內存泄漏
                MDC.clear();
            }
        };
    }
}

ExecutorConfig

在原來的基礎上增加 executor.setTaskDecorator(new MDCTaskDecorator());

@Bean(name = "asyncServiceExecutor")
    public Executor asyncServiceExecutor() {
        log.info("start asyncServiceExecutor----------------");
        //ThreadPoolTaskExecutor executor = new ThreadPoolTaskExecutor();
        //使用可視化運行狀態的線程池
        ThreadPoolTaskExecutor executor = new VisiableThreadPoolTaskExecutor();
        //配置核心線程數
        executor.setCorePoolSize(corePoolSize);
        //配置最大線程數
        executor.setMaxPoolSize(maxPoolSize);
        //配置隊列大小
        executor.setQueueCapacity(queueCapacity);
        //配置線程池中的線程的名稱前綴
        executor.setThreadNamePrefix(namePrefix);
        // rejection-policy：當pool已經達到max size的時候，如何處理新任務
        // CALLER_RUNS：不在新線程中執行任務，而是有調用者所在的線程來執行
        executor.setRejectedExecutionHandler(new ThreadPoolExecutor.CallerRunsPolicy());
        //增加MDC的線程池修飾類
        executor.setTaskDecorator(new MDCTaskDecorator());
        //執行初始化
        executor.initialize();
        log.info("end asyncServiceExecutor------------");
        return executor;
    }

AsyncServiceImpl

         /**
     * 使用MDC獲取主線程傳遞的數據
     * @return
     * @throws InterruptedException
     */
    @Async("asyncServiceExecutor")
    public CompletableFuture<String> executeValueAsync5() throws InterruptedException {
        log.info("start executeValueAsync");
        System.out.println("異步線程執行返回結果......+");
        log.info("end executeValueAsync");
        return CompletableFuture.completedFuture(MDC.get("userId"));
    }

Test2Controller

     /**
     * 使用MDC+TaskDecorator方式
     * 本質也是ThreadLocal+TaskDecorator方式
     * @return
     * @throws InterruptedException
     * @throws ExecutionException
     */
    @GetMapping("/test5")
    public String test5() throws InterruptedException, ExecutionException {
        MDC.put("userId","123456");
        CompletableFuture<String> completableFuture = asyncService.executeValueAsync5();
        String s = completableFuture.get();
        return s;
    }

方案4.InheritableThreadLocal

用戶工具類 UserInheritableUtils

//**
 *使用InheritableThreadLocal存儲線程之間共享的數據變量，如登錄的用戶信息
 */
public class UserInheritableUtils {
    private static  final  InheritableThreadLocal<String> userLocal=new InheritableThreadLocal<>();
 
    public static  String getUserId(){
        return userLocal.get();
    }
    public static void setUserId(String userId){
        userLocal.set(userId);
    }
    public static void clear(){
        userLocal.remove();
    }
}

AsyncServiceImpl

      /**
     * 使用InheritableThreadLocal獲取主線程傳遞的數據
     * @return
     * @throws InterruptedException
     */
    @Async("asyncServiceExecutor")
    public CompletableFuture<String> executeValueAsync4() throws InterruptedException {
        log.info("start executeValueAsync");
        System.out.println("異步線程執行返回結果......+");
        log.info("end executeValueAsync");
        return CompletableFuture.completedFuture(UserInheritableUtils.getUserId());
    }

Test2Controller

       /**
     * 使用InheritableThreadLocal方式
     * @return
     * @throws InterruptedException
     * @throws ExecutionException
     */
    @GetMapping("/test4")
    public String test4(@RequestParam("userId") String userId) throws InterruptedException, ExecutionException {
        UserInheritableUtils.setUserId(userId);
        CompletableFuture<String> completableFuture = asyncService.executeValueAsync4();
        String s = completableFuture.get();
        return s;
    }

方案5.TransmittableThreadLocal

用戶工具類 UserTransmittableUtils

/**
 *使用TransmittableThreadLocal存儲線程之間共享的數據變量，如登錄的用戶信息
 */
public class UserTransmittableUtils {
    private static  final TransmittableThreadLocal<String> userLocal=new TransmittableThreadLocal<>();
    public static  String getUserId(){
        return userLocal.get();
    }
    public static void setUserId(String userId){
        userLocal.set(userId);
    }
    public static void clear(){
        userLocal.remove();
    }
}
}

AsyncServiceImpl

   /**
     * 使用TransmittableThreadLocal獲取主線程傳遞的數據
     * @return
     * @throws InterruptedException
     */
    @Async("asyncServiceExecutor")
    public CompletableFuture<String> executeValueAsync6() throws InterruptedException {
        log.info("start executeValueAsync");
        System.out.println("異步線程執行返回結果......+");
        log.info("end executeValueAsync");
        return CompletableFuture.completedFuture(UserTransmittableUtils.getUserId());
    }

Test2Controller

   /**
     * 使用TransmittableThreadLocal方式
     * @return
     * @throws InterruptedException
     * @throws ExecutionException
     */
    @GetMapping("/test6")
    public String test6() throws InterruptedException, ExecutionException {
        UserTransmittableUtils.setUserId("123456");
        CompletableFuture<String> completableFuture = asyncService.executeValueAsync6();
        String s = completableFuture.get();
        return s;
    }

maven依賴

        <dependency>
            <groupId>com.alibaba</groupId>
            <artifactId>transmittable-thread-local</artifactId>
            <version>2.12.1</version>
        </dependency>

方案對比

方案1，方案2，方案3主要是借助TaskDecorator進行父子線程之間傳遞數據。其中MDC方案主要借鑒于MDC的日志跟蹤的思想來實現,關于MDC相關的日志跟蹤后續會學習分享

方案4和方案5使用InheritableThreadLocal和TransmittableThreadLocal來實現，其中TransmittableThreadLocal是阿里InheritableThreadLocal進行優化封裝。

本人推薦使用方案5，哈哈。

簡答說一下InheritableThreadLocal

public static void main(String[] args) {
        ThreadPoolExecutor executor = new ThreadPoolExecutor(1,1,1,
                TimeUnit.MINUTES,new ArrayBlockingQueue<>(1));
        ThreadLocal local = new InheritableThreadLocal();
        local.set(1);
        executor.execute(()->{
            System.out.println("打印1:"+local.get());
        });
        local.set(2);
        System.out.println("打印2:"+local.get());
        executor.execute(()->{
            System.out.println("打印3:"+local.get());
        });
        new Thread(new Runnable() {
            @Override
            public void run() {
                System.out.println("打印4:"+local.get());
            }
        }).start();
    }

運行結果如下

打印2:2
打印1:1
打印3:1
打印4:2

分析：分析打印3為什么是1，InheritableThreadLocal的繼承性是在new Thread創建子線程時候在構造函數內把父線程內線程變量拷貝到子線程內部的。為了不在創建新線程耗費資源，我們一般會用線程池，線程池的線程會復用，那么線程中的ThreadLocal便不對了，可能是舊的，因?yàn)榫€程是舊的。

總結

上面的的方案你學會了么

到此這篇關于SpringBoot父子線程數據傳遞的五種方案介紹的文章就介紹到這了,更多相關SpringBoot數據傳遞內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: