使用@Autowired 注入RedisTemplate報錯的問題及解決
@Autowired 注入RedisTemplate報錯
先看報錯信息
Field redisTemplate in xxx.xxx required a bean of type 'org.springframework.data.redis.core. RedisTemplate' that could not be found.
The injection point has the following annotations:
? @org.springframework.beans.factory.annotation.Autowired(required=true)
下面是Redis配置類
@Configuration
public class RedisConfig {
@Bean
public RedisTemplate<String, Object> redisTemplate(LettuceConnectionFactory lettuceConnectionFactory) {
// 設置序列化
Jackson2JsonRedisSerializer<Object> jackson2JsonRedisSerializer = new Jackson2JsonRedisSerializer<>(Object.class);
ObjectMapper om = new ObjectMapper();
om.setVisibility(PropertyAccessor.ALL, JsonAutoDetect.Visibility.ANY);
om.enableDefaultTyping(ObjectMapper.DefaultTyping.NON_FINAL);
jackson2JsonRedisSerializer.setObjectMapper(om);
// 配置redisTemplate
RedisTemplate<String, Object> redisTemplate = new RedisTemplate<>();
redisTemplate.setConnectionFactory(lettuceConnectionFactory);
RedisSerializer<?> stringSerializer = new StringRedisSerializer();
redisTemplate.setKeySerializer(stringSerializer);// key序列化
redisTemplate.setValueSerializer(jackson2JsonRedisSerializer);// value序列化
redisTemplate.setHashKeySerializer(stringSerializer);// Hash key序列化
redisTemplate.setHashValueSerializer(jackson2JsonRedisSerializer);// Hash value序列化
redisTemplate.afterPropertiesSet();
return redisTemplate;
}
}下面是注入方式
@Autowired
private RedisTemplate<String, Object> redisTemplate;解決方法一
將@Autowired改為 @Resource
@Resource
private RedisTemplate<String, Object> redisTemplate;解決方法二
去掉泛型
@Autowired private RedisTemplate redisTemplate;
下面咱們來看一下原因
首先我們需要了解@Autowired和@Resource的區別
他們的共同點
@Resource和@Autowired都是做bean的注入時使用的。
不同點
Autowired默認是按照類型裝配注入的,默認情況下它要求依賴對象必須存在Resource默認是按照名稱來裝配注入的,只有當找不到與名稱匹配的bean才會按照類型來裝配注入
由于Autowired是根據類型來裝配注入的,所以泛型也被考慮進去了,所以它會去spring容器中找 RedisTemplate<String, Object> 這個bean ;
String[] beanDefinitionNames = run.getBeanDefinitionNames(); System.out.println(Arrays.toString(beanDefinitionNames));
通過代碼獲取到spring容器中所有的bean ,控制臺打印redisTemplate 所以無法找到對應的bean

@Autowired 注入RedisTemplate為null
最近使用Springboot引入redis,直接在Service里使用@Autowired 注入RedisTemplate,但是啟動時發現注入的@RedisTemplate為null
@Service
public class CacheRedisImpl implements Cache {
@Autowired(required = false)
private RedisTemplate<String,Object> redisTemplate;
....
}上述代碼運行啟動之后斷點,如下圖,無論如何都是null

最后去查閱spring的源碼 RedisAutoConfiguration(在org.springframework.boot.autoconfigure.data.redis包)
@Configuration
@ConditionalOnClass(RedisOperations.class)
@EnableConfigurationProperties(RedisProperties.class)
@Import({ LettuceConnectionConfiguration.class, JedisConnectionConfiguration.class })
public class RedisAutoConfiguration {
@Bean
@ConditionalOnMissingBean(name = "redisTemplate")
public RedisTemplate<Object, Object> redisTemplate(
RedisConnectionFactory redisConnectionFactory) throws UnknownHostException {
RedisTemplate<Object, Object> template = new RedisTemplate<>();
template.setConnectionFactory(redisConnectionFactory);
return template;
}
...終于發現問題了,spring注入的是RedisTemplate<Object, Object>
而我注入的泛型是RedisTemplate<String,Object>。
解決
通過上述排查分析,解決方案有如下
1.@Autowired 時使用RedisTemplate<Object, Object> 或RedisTemplate
@Service
public class CacheRedisImpl implements Cache {
@Autowired(required = false)
private RedisTemplate redisTemplate;運行效果如下圖:

2.如一定要使用RedisTemplate<String,Object>,寫一個Configuration自行手動注入@Bean
@Configuration
public class RedisAutoConfig {
@Bean(name = "redisTemplate4String")
public RedisTemplate<String,Object> redisTemplate4String(RedisConnectionFactory redisConnectionFactory){
RedisTemplate<String,Object> redisTemplate = new RedisTemplate<>();
redisTemplate.setConnectionFactory(redisConnectionFactory);
return redisTemplate;
}
}效果如下:

PS: 其實細心的童鞋可能會發現我的代碼里@Autowired配置是(required = false)。如果去掉的話,springboot 啟動里會直接報錯找不到bean。解決方案與本文類似。
以上為個人經驗,希望能給大家一個參考,也希望大家多多支持腳本之家。
- springboot使用redisTemplate操作lua腳本
- SpringBoot整合Redis使用@Cacheable和RedisTemplate
- 使用redisTemplate從redis獲取所有數據
- Java使用RedisTemplate如何根據前綴獲取key列表
- 關于RedisTemplate之opsForValue的使用說明
- SpringBoot使用RedisTemplate.delete刪除指定key失敗的解決辦法
- Redis使用RedisTemplate模板類的常用操作方式
- RedisTemplate中opsForValue和opsForList方法的使用詳解
- Redis Template使用詳解示例教程
相關文章
基于Java中進制的轉換函數詳解
下面小編就為大家?guī)硪黄贘ava中進制的轉換函數詳解。小編覺得挺不錯的,現在就分享給大家,也給大家做個參考。一起跟隨小編過來看看吧2017-07-07
ThreadPoolExecutor核心線程數和RocketMQ消費線程調整詳解
這篇文章主要介紹了ThreadPoolExecutor核心線程數和RocketMQ消費線程調整詳解,Rocketmq 消費者在高峰期希望手動減少消費線程數,通過DefaultMQPushConsumer.updateCorePoolSize方法可以調用內部的setCorePoolSize設置多線程核心線程數,需要的朋友可以參考下2023-10-10
SpringCloud+nacos部署在多ip環境下統一nacos服務注冊ip(親測有效)
在部署SpringCoud項目的時候分服務器部署注冊同一個nacos服務,但是在服務器有多個ip存在的同時(內外網),就會出現注冊服務ip不同的問題,導致一些接口無法連接訪問,經過多次排查終于找到問題并找到解決方法,需要的朋友可以參考下2023-04-04
解決Spring?Boot應用打包后文件訪問問題

