datatype參數取值
值	描述
DATE	將value轉換成'YYYY-MM-DD'格式
DATETIME	將value轉換成'YYYY-MM-DD HH：MM：SS'格式
TIME	將value轉換成'HH：MM：SS'格式
CHAR	將value轉換成CHAR(固定長度的字符串)格式
SIGNED	將value轉換成INT(有符號的整數)格式
UNSIGNED	將value轉換成INT(無符號的整數)格式
DECIMAL	將value轉換成FLOAT(浮點數)格式
BINARY	將value轉換成二進制格式

示例

1.將值轉換為DATE數據類型

-- 2017-08-29
SELECT CAST('2017-08-29' AS DATE); 
 
-- 2022-04-27 15:42:19
SELECT NOW();
-- 2022-04-27
SELECT CAST(NOW() AS DATE);

2.將值轉換為DATETIME數據類型

-- 2022-04-27 00:00:00
SELECT CAST('2022-04-27' AS DATETIME);

3.將值轉換為TIME數據類型

-- 14:06:10
SELECT CAST('14:06:10' AS TIME); 
-- 14:06:10
SELECT CAST('2022-04-27 14:06:10' AS TIME);

4.將值轉換為CHAR數據類型

-- '150'
SELECT CAST(150 AS CHAR); 
 
-- 出錯Error
SELECT CONCAT('Hello World',437));
-- 'Hello World437'
SELECT CONCAT('Hello World',CAST(437 AS CHAR));

5.將值轉換為SIGNED數據類型

-- 5
SELECT CAST('5.0' AS SIGNED);
-- 2
SELECT (1 + CAST('3' AS SIGNED))/2;
-- -5
SELECT CAST(5-10 AS SIGNED); 
-- 6
SELECT CAST(6.4 AS SIGNED);
-- -6
SELECT CAST(-6.4 AS SIGNED);
-- 7
SELECT CAST(6.5 AS SIGNED); 
-- -7
SELECT CAST(-6.5 AS SIGNED);

6.將值轉換為UNSIGNED數據類型

-- 5
SELECT CAST('5.0' AS UNSIGNED);
-- 6
SELECT CAST(6.4 AS UNSIGNED);
-- 0
SELECT CAST(-6.4 AS UNSIGNED);
-- 7
SELECT CAST(6.5 AS UNSIGNED); 
-- 0
SELECT CAST(-6.5 AS UNSIGNED);

7.將值轉換為DECIMAL數據類型

-- 9
SELECT CAST('9.0' AS DECIMAL);
 
-- DECIMAL(數值精度，小數點保留長度)
-- DECIMAL(10,2)可以存儲最多具有8位整數和2位小數的數字
-- 精度與小數位數分別為10與2
-- 精度是總的數字位數，包括小數點左邊和右邊位數的總和
-- 小數位數是小數點右邊的位數
-- 9.50
SELECT CAST('9.5' AS DECIMAL(10,2));
-- 99999999.99
SELECT CAST('1234567890.123' AS DECIMAL(10,2));
 
-- 220.232
SELECT CAST('220.23211231' AS DECIMAL(10, 3));
-- 220.232
SELECT CAST(220.23211231 AS DECIMAL(10, 3));

練習案例

導入數據

DROP TABLE IF EXISTS `Material`;
CREATE TABLE `Material` (
  `ID` varchar(255) DEFAULT NULL,
  `Material` varchar(255) DEFAULT NULL,
  `FileName` varchar(255) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;
 
INSERT INTO `Material` VALUES ('1', '07-100215-01', 'FD03-FCZ-220430012624541.txt');
INSERT INTO `Material` VALUES ('2', '07-100390-01', 'FD03-FCZ-210318012624541.txt');
INSERT INTO `Material` VALUES ('3', '07-1043-01', 'FD03-FCZ-170430012624541.txt');
INSERT INTO `Material` VALUES ('4', '07-1044-01', 'FD03-FCZ-191225012624541.txt');
INSERT INTO `Material` VALUES ('5', '07-1045-01', 'FD03-FCZ-200601012624541.txt');
INSERT INTO `Material` VALUES ('6', '07-1046-01', 'FD03-FCZ-180705012624541.txt');

Material表

Material:料號 FileName:文件名稱(存儲相應料號位置)

注明: ID，Material，F(xiàn)ileName都是VARCHAR類型

FileName取值舉例說明:'FD03-FCZ-220430012624541.txt'，紅色標注數字代表年月日，其余都取值相同(不用考慮具體含義)

問題:查詢小于220401(整數類型年月日數值)的Material

SELECT Material
FROM (SELECT Material,(CAST(SUBSTRING(FileName,10,6)AS SIGNED))AS 'time'
      FROM Material
      WHERE 'time' < 220401)AS filter_material;

解題思路
利用SUBSTRING函數截取FileName值中代表年月日的數字
由于FileName中的值為varchar類型，220401為整數類型，需要使用CAST函數進行類型轉換

結果展示: