基于Python實現煙花效果的示例代碼
python煙花代碼
如下
# -*- coding: utf-8 -*- import math, random,time import threading import tkinter as tk import re #import uuid Fireworks=[] maxFireworks=8 height,width=600,600 class firework(object): def __init__(self,color,speed,width,height): #uid=uuid.uuid1() self.radius=random.randint(2,4) #粒子半徑為2~4像素 self.color=color #粒子顏色 self.speed=speed #speed是1.5-3.5秒 self.status=0 #在煙花未爆炸的情況下,status=0;爆炸后,status>=1;當status>100時,煙花的生命期終止 self.nParticle=random.randint(20,30) #粒子數量 self.center=[random.randint(0,width-1),random.randint(0,height-1)] #煙花隨機中心坐標 self.oneParticle=[] #原始粒子坐標(100%狀態時) self.rotTheta=random.uniform(0,2*math.pi) #橢圓平面旋轉角 #橢圓參數方程:x=a*cos(theta),y=b*sin(theta) #ellipsePara=[a,b] self.ellipsePara=[random.randint(30,40),random.randint(20,30)] theta=2*math.pi/self.nParticle for i in range(self.nParticle): t=random.uniform(-1.0/16,1.0/16) #產生一個 [-1/16,1/16) 的隨機數 x,y=self.ellipsePara[0]*math.cos(theta*i+t), self.ellipsePara[1]*math.sin(theta*i+t) #橢圓參數方程 xx,yy=x*math.cos(self.rotTheta)-y*math.sin(self.rotTheta), y*math.cos(self.rotTheta)+x*math.sin(self.rotTheta) #平面旋轉方程 self.oneParticle.append([xx,yy]) self.curParticle=self.oneParticle[0:] #當前粒子坐標 self.thread=threading.Thread(target=self.extend) #建立線程對象 def extend(self): #粒子群狀態變化函數線程 for i in range(100): self.status+=1 #更新狀態標識 self.curParticle=[[one[0]*self.status/100, one[1]*self.status/100] for one in self.oneParticle] #更新粒子群坐標 time.sleep(self.speed/50) def explode(self): self.thread.setDaemon(True) #把現程設為守護線程 self.thread.start() #啟動線程 def __repr__(self): return ('color:{color} ' 'speed:{speed} ' 'number of particle: {np} ' 'center:[{cx} , {cy}] ' 'ellipse:a={ea} , b={eb} ' 'particle: {p} ' ).format(color=self.color,speed=self.speed,np=self.nParticle,cx=self.center[0],cy=self.center[1],p=str(self.oneParticle),ea=self.ellipsePara[0],eb=self.ellipsePara[1]) def colorChange(fire): rgb=re.findall(r'(.{2})',fire.color[1:]) cs=fire.status f=lambda x,c: hex(int(int(x,16)*(100-c)/30))[2:] #當粒子壽命到70%時,顏色開始線性衰減 if cs>70: ccr,ccg,ccb=f(rgb[0],cs),f(rgb[1],cs),f(rgb[2],cs) else: ccr,ccg,ccb=rgb[0],rgb[1],rgb[2] return '#{0:0>2}{1:0>2}{2:0>2}'.format(ccr,ccg,ccb) def appendFirework(n=1): #遞歸生成煙花對象 if n>maxFireworks or len(Fireworks)>maxFireworks: pass elif n==1: cl='#{0:0>6}'.format(hex(int(random.randint(0,16777215)))[2:]) # 產生一個0~16777215(0xFFFFFF)的隨機數,作為隨機顏色 a=firework(cl,random.uniform(1.5,3.5),width,height) Fireworks.append( {'particle':a,'points':[]} ) #建立粒子顯示列表,‘particle'為一個煙花對象,‘points'為每一個粒子顯示時的對象變量集 a.explode() else: appendFirework() appendFirework(n-1) def show(c): for p in Fireworks: #每次刷新顯示,先把已有的所以粒子全部刪除 for pp in p['points']: c.delete(pp) for p in Fireworks: #根據每個煙花對象,計算其中每個粒子的顯示對象 oneP=p['particle'] if oneP.status==100: #狀態標識為100,說明煙花壽命結束 Fireworks.remove(p) #移出當前煙花 appendFirework() #新增一個煙花 continue else: li=[[int(cp[0]*2)+oneP.center[0],int(cp[1]*2)+oneP.center[1]] for cp in oneP.curParticle] #把中心為原點的橢圓平移到隨機圓心坐標上 color=colorChange(oneP) #根據煙花當前狀態計算當前顏色 for pp in li: p['points'].append(c.create_oval(pp[0]-oneP.radius, pp[1]-oneP.radius, pp[0]+oneP.radius, pp[1]+oneP.radius, fill=color)) #繪制煙花每個粒子 root.after(50, show,c) #回調,每50ms刷新一次 if __name__=='__main__': appendFirework(maxFireworks) root = tk.Tk() cv = tk.Canvas(root, height=height, width=width) cv.create_rectangle(0, 0, width, height, fill="black") cv.pack() root.after(50, show,cv) root.mainloop()
圖片展示
到此這篇關于基于Python實現煙花效果的示例代碼的文章就介紹到這了,更多相關Python煙花內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!
相關文章
python解析發往本機的數據包示例 (解析數據包)
這篇文章主要介紹了使用python解析獲取發往本機的數據包,并打印出來, 大家參考使用吧2014-01-012021年的Python 時間軸和即將推出的功能詳解
這篇文章主要介紹了2021年的Python 時間軸和即將推出的功能,本文通過實例代碼給大家介紹的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2020-07-07Python讀取文件內容為字符串的方法(多種方法詳解)
這篇文章主要介紹了Python讀取文件內容為字符串的方法,本文通過三種方式給大家介紹,在文章末尾給大家提到了python讀取txt文件中字符串,字符串用空格分隔的相關知識,需要的朋友可以參考下2020-03-03CentOS下使用yum安裝python-pip失敗的完美解決方法
這篇文章主要介紹了CentOS下使用yum安裝python-pip失敗的完美解決方法,需要的朋友可以參考下2017-08-08python?中defaultdict()對字典進行初始化的用法介紹
這篇文章主要介紹了python?中defaultdict()對字典進行初始化,一般情況下,在使用字典時,先定義一個空字典(如dict_a?=?{}),然后往字典中添加元素只需要?dict_a[key]?=?value即可,本文通過實例代碼介紹具體用法,需要的朋友可以參考下2022-07-07

OpenCV-Python實現圖像平滑處理操作