Go語言上下文context底層原理
1. context 介紹
很多時候,我們會遇到這樣的情況,上層與下層的goroutine需要同時取消,這樣就涉及到了goroutine間的通信。在Go中,推薦我們以通信的方式共享內存,而不是以共享內存的方式通信。所以,就需要用到channl,但是,在上述場景中,如果需要自己去處理channl的業務邏輯,就會有很多費時費力的重復工作,因此,context出現了。
context是Go中用來進程通信的一種方式,其底層是借助channl與snyc.Mutex實現的。
2. 基本介紹
context的底層設計,我們可以概括為1個接口,4種實現與6個方法。
1 個接口
- Context 規定了
context的四個基本方法
4 種實現
- emptyCtx 實現了一個空的
context,可以用作根節點 - cancelCtx 實現一個帶
cancel功能的context,可以主動取消 - timerCtx 實現一個通過定時器
timer和截止時間deadline定時取消的context - valueCtx 實現一個可以通過
key、val兩個字段來存數據的context
6 個方法:
- Background 返回一個
emptyCtx作為根節點 - TODO 返回一個
emptyCtx作為未知節點 - WithCancel 返回一個
cancelCtx - WithDeadline 返回一個
timerCtx - WithTimeout 返回一個
timerCtx - WithValue 返回一個
valueCtx
3. 源碼分析
3.1 Context 接口
type Context interface {
Deadline() (deadline time.Time, ok bool)
Done() <-chan struct{}
Err() error
Value(key interface{}) interface{}
}- Deadline() :返回一個time.Time,表示當前Context應該結束的時間,ok則表示有結束時間
- Done():返回一個只讀chan,如果可以從該 chan 中讀取到數據,則說明 ctx 被取消了
- Err():返回 Context 被取消的原因
- Value(key):返回key對應的value,是協程安全的
3.2 emptyCtx
type emptyCtx int
func (*emptyCtx) Deadline() (deadline time.Time, ok bool) {
return
}
func (*emptyCtx) Done() <-chan struct{} {
return nil
}
func (*emptyCtx) Err() error {
return nil
}
func (*emptyCtx) Value(key interface{}) interface{} {
return nil
}emptyCtx實現了空的Context接口,其主要作用是為Background和TODO這兩個方法都會返回預先初始化好的私有變量 background 和 todo,它們會在同一個 Go 程序中被復用:
var (
background = new(emptyCtx)
todo = new(emptyCtx)
)
func Background() Context {
return background
}
func TODO() Context {
return todo
}Background和TODO在實現上沒有區別,只是在使用語義上有所差異:
Background是上下文的根節點;TODO應該僅在不確定應該使用哪種上下文時使用;
3.3 cancelCtx
cancelCtx實現了canceler接口與Context接口:
type canceler interface {
cancel(removeFromParent bool, err error)
Done() <-chan struct{}
}其結構體如下:
type cancelCtx struct {
// 直接嵌入了一個 Context,那么可以把 cancelCtx 看做是一個 Context
Context
mu sync.Mutex // protects following fields
done atomic.Value // of chan struct{}, created lazily, closed by first cancel call
children map[canceler]struct{} // set to nil by the first cancel call
err error // set to non-nil by the first cancel call
}我們可以使用WithCancel的方法來創建一個cancelCtx:
func WithCancel(parent Context) (ctx Context, cancel CancelFunc) {
if parent == nil {
panic("cannot create context from nil parent")
}
c := newCancelCtx(parent)
propagateCancel(parent, &c)
return &c, func() { c.cancel(true, Canceled) }
}
func newCancelCtx(parent Context) cancelCtx {
return cancelCtx{Context: parent}
}上面的方法,我們傳入一個父 Context(這通常是一個 background,作為根節點),返回新建的 context,并通過閉包的形式,返回了一個 cancel 方法。
newCancelCtx將傳入的上下文包裝成私有結構體context.cancelCtx。
propagateCancel則會構建父子上下文之間的關聯,形成樹結構,當父上下文被取消時,子上下文也會被取消:
func propagateCancel(parent Context, child canceler) {
// 1.如果 parent ctx 是不可取消的 ctx,則直接返回 不進行關聯
done := parent.Done()
if done == nil {
return // parent is never canceled
}
// 2.接著判斷一下 父ctx 是否已經被取消
select {
case <-done:
// 2.1 如果 父ctx 已經被取消了,那就沒必要關聯了
// 然后這里也要順便把子ctx給取消了,因為父ctx取消了 子ctx就應該被取消
// 這里是因為還沒有關聯上,所以需要手動觸發取消
// parent is already canceled
child.cancel(false, parent.Err())
return
default:
}
// 3. 從父 ctx 中提取出 cancelCtx 并將子ctx加入到父ctx 的 children 里面
if p, ok := parentCancelCtx(parent); ok {
p.mu.Lock()
// double check 一下,確認父 ctx 是否被取消
if p.err != nil {
// 取消了就直接把當前這個子ctx給取消了
// parent has already been canceled
child.cancel(false, p.err)
} else {
// 否則就添加到 children 里面
if p.children == nil {
p.children = make(map[canceler]struct{})
}
p.children[child] = struct{}{}
}
p.mu.Unlock()
} else {
// 如果沒有找到可取消的父 context。新啟動一個協程監控父節點或子節點取消信號
atomic.AddInt32(&goroutines, +1)
go func() {
select {
case <-parent.Done():
child.cancel(false, parent.Err())
case <-child.Done():
}
}()
}
}上面的方法可能遇到以下幾種情況:
- 當
parent.Done() == nil,也就是parent不會觸發取消事件時,當前函數會直接返回; - 當
child的繼承鏈包含可以取消的上下文時,會判斷parent是否已經觸發了取消信號;- 如果已經被取消,
child會立刻被取消; - 如果沒有被取消,
child會被加入parent的children列表中,等待parent釋放取消信號;
- 如果已經被取消,
- 當父上下文是開發者自定義的類型、實現了 context.Context 接口并在
Done()方法中返回了非空的管道時;- 運行一個新的 Goroutine 同時監聽
parent.Done()和child.Done()兩個 Channel; - 在
parent.Done()關閉時調用child.cancel取消子上下文;
- 運行一個新的 Goroutine 同時監聽
propagateCancel 的作用是在 parent 和 child 之間同步取消和結束的信號,保證在 parent 被取消時,child 也會收到對應的信號,不會出現狀態不一致的情況。
func parentCancelCtx(parent Context) (*cancelCtx, bool) {
done := parent.Done()
// 如果 done 為 nil 說明這個ctx是不可取消的
// 如果 done == closedchan 說明這個ctx不是標準的 cancelCtx,可能是自定義的
if done == closedchan || done == nil {
return nil, false
}
// 然后調用 value 方法從ctx中提取出 cancelCtx
p, ok := parent.Value(&cancelCtxKey).(*cancelCtx)
if !ok {
return nil, false
}
// 最后再判斷一下cancelCtx 里存的 done 和 父ctx里的done是否一致
// 如果不一致說明parent不是一個 cancelCtx
pdone, _ := p.done.Load().(chan struct{})
if pdone != done {
return nil, false
}
return p, true
}ancelCtx 的 done 方法會返回一個 chan struct{}:
func (c *cancelCtx) Done() <-chan struct{} {
d := c.done.Load()
if d != nil {
return d.(chan struct{})
}
c.mu.Lock()
defer c.mu.Unlock()
d = c.done.Load()
if d == nil {
d = make(chan struct{})
c.done.Store(d)
}
return d.(chan struct{})
}
var closedchan = make(chan struct{})parentCancelCtx 其實就是判斷 parent context 里面有沒有一個 cancelCtx,有就返回,讓子context可以“掛靠”到parent context 上,如果不是就返回false,不進行掛靠,自己新開一個 goroutine 來監聽。
3.4 timerCtx
timerCtx 內部不僅通過嵌入 cancelCtx 的方式承了相關的變量和方法,還通過持有的定時器 timer 和截止時間 deadline 實現了定時取消的功能:
type timerCtx struct {
cancelCtx
timer *time.Timer // Under cancelCtx.mu.
deadline time.Time
}
func (c *timerCtx) Deadline() (deadline time.Time, ok bool) {
return c.deadline, true
}
func (c *timerCtx) cancel(removeFromParent bool, err error) {
c.cancelCtx.cancel(false, err)
if removeFromParent {
removeChild(c.cancelCtx.Context, c)
}
c.mu.Lock()
if c.timer != nil {
c.timer.Stop()
c.timer = nil
}
c.mu.Unlock()
}3.5 valueCtx
valueCtx 是多了 key、val 兩個字段來存數據:
type valueCtx struct {
Context
key, val interface{}
}取值查找的過程,實際上是一個遞歸查找的過程:
func (c *valueCtx) Value(key interface{}) interface{} {
if c.key == key {
return c.val
}
return c.Context.Value(key)
}如果 key 和當前 ctx 中存的 value 一致就直接返回,沒有就去 parent 中找。最終找到根節點(一般是 emptyCtx),直接返回一個 nil。所以用 Value 方法的時候要判斷結果是否為 nil,類似于一個鏈表,效率是很低的,不建議用來傳參數。
4. 使用建議
在官方博客里,對于使用 context 提出了幾點建議:
- 不要將 Context 塞到結構體里。直接將 Context 類型作為函數的第一參數,而且一般都命名為 ctx。
- 不要向函數傳入一個 nil 的 context,如果你實在不知道傳什么,標準庫給你準備好了一個 context:todo。
- 不要把本應該作為函數參數的類型塞到 context 中,context 存儲的應該是一些共同的數據。例如:登陸的 session、cookie 等。
- 同一個 context 可能會被傳遞到多個 goroutine,別擔心,context 是并發安全的。
到此這篇關于Go語言上下文context底層原理的文章就介紹到這了,更多相關Go context 內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!
相關文章
詳解prometheus監控golang服務實踐記錄
這篇文章主要介紹了詳解prometheus監控golang服務實踐記錄,本文給大家介紹的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2020-11-11
基于gin的golang web開發之認證利器jwt
這篇文章主要介紹了基于gin的golang web開發之認證利器jwt,本文給大家介紹的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2020-12-12

