利用Pygame制作躲避僵尸游戲
更新時間：2022年05月30日 08:14:39 作者：我的天才女友
本文參考了神廟逃亡，利用Pygame實現一個人躲避僵尸的小游戲，主要的是精靈、精靈組之間相撞、相交的處理，感興趣的可以了解一下
游戲玩法
根據神廟逃亡，實現一個人躲避僵尸的小游戲，主要的是精靈、精靈組之間相撞、相交的處理。
游戲開始隨機出現一定的僵尸，隨機移動，玩家在一位置上，如果僵尸靠近玩家一定距離，則玩家持續掉血。玩家通過上下左右移動躲避僵尸，屏幕會隨機刷新一個加血包，玩家吃了就會加一定的血，并在此刷新血包。
property()
這個函數在類中返回新的屬性
property(get,set,del,doc)
參數如上所示，get、set、del分別是獲取設值刪除調用的，doc是描述的。
精靈類
在原來的精靈類中添加方向和屬性即可。
class MySprite(pygame.sprite.Sprite):
def __init__(self, target):
pygame.sprite.Sprite.__init__(self)
self.master_image = None
self.frame = 0
self.old_frame = -1
self.frame_width = 1
self.frame_height = 1
self.first_frame = 0
self.last_frame = 0
self.columns = 1
self.last_time = 0
self.direction = 0
self.classification = "玩家"
def load(self, filename, width, height, columns, direction, classification="玩家"):
# 精靈的屬性
self.classification = classification
# 方向
self.direction = direction
# 載入圖片
# 780 * 300
self.master_image = pygame.image.load(filename).convert_alpha() # 載入圖片
self.frame_width = width
self.frame_height = height
self.rect = Rect(0, 0, width, height)
self.columns = columns
rect = self.master_image.get_rect()
self.last_frame = (rect.width // width) * (rect.height // height) - 1
def update(self, current_time, rate=30): # current_time 更新頻率 為30
if current_time > self.last_time + rate: # 如果當前事件 大于 最后的時間 + 當前的節奏
self.frame += 1 # 當前的幀數加一
if self.frame > self.last_frame: # 當前最后一幀 則從第一幀開始
self.frame = self.first_frame # 從0開始
self.last_time = current_time # 將最后幀值為30
# build current frame only if it changed
if self.frame != self.old_frame: # 當前幀數不等于老的一幀
frame_x = (self.frame % self.columns) * self.frame_width
frame_y = (self.frame // self.columns) * self.frame_height
rect = (frame_x, frame_y, self.frame_width, self.frame_height) # 更新對應的位置
self.image = self.master_image.subsurface(rect) # 循環箱已有的方向
self.old_frame = self.frame
def __str__(self):
return str(self.frame) + "," + str(self.first_frame) + \
"," + str(self.last_frame) + "," + str(self.frame_width) + \
"," + str(self.frame_height) + "," + str(self.columns)
初始畫面
和原來一樣，先建立簡單的畫面。
import mySprite1
import pygame, sys, random
from pygame.locals import *
def print_text(font, x, y, text, color=(255, 255, 255)):
imgText = font.render(text, True, color)
screen.blit(imgText, (x, y))
# 設置窗口
pygame.init()
screen = pygame.display.set_mode((800, 600))
pygame.display.set_caption("勇闖后半夜")
font = pygame.font.Font(None, 30)
timer = pygame.time.Clock()
while True:
for event in pygame.event.get():
if event.type == QUIT:
sys.exit()
key = pygame.key.get_pressed()
if key[K_ESCAPE]:
sys.exit()
screen.fill((50, 50, 100))
pygame.display.update()
精靈移動函數
如果是僵尸遇到墻壁自動反方向走，根據方向改變對應的位置。
def reversal_direction(mySprite):
direction = mySprite.direction
if direction == 0:
direction = 4
elif direction == 2:
direction = 6
elif direction == 4:
direction = 0
elif direction == 6:
direction = 2
mySprite.direction = direction
def increment(mySprite, offset=1):
# 上下左右
direction = mySprite.direction
rect = mySprite.rect
if direction == 0:
rect.y -= offset
elif direction == 2:
rect.x += offset
elif direction == 4:
rect.y += offset
elif direction == 6:
rect.x -= offset
# 超出邊界的處理
# 超出邊界flg
boundary = False
if rect.x < 0:
rect.x = 0
boundary = True
if rect.x + mySprite.frame_width > 800:
rect.x = 800 - mySprite.frame_width
boundary = True
if rect.y < 0:
rect.y = 0
boundary = True
if rect.y + mySprite.frame_height > 600:
rect.y = 600 - mySprite.frame_height
boundary = True
# 如果超出邊界而且是僵尸的話 則反轉方向
if boundary and mySprite.classification == "僵尸":
reversal_direction(mySprite)
加載玩家
這個是素材的圖，如上所示，奇數行便是對應的方向移動。文件大小是768 * 768，可以分為96 * 96的8張。
加載玩家
# 玩家
play_group = pygame.sprite.Group()
play = mySprite1()
play.load("farmer walk.png", 96, 96, 8)
play.direction = -1
play_group.rect.x = 96
play_group.rect.y = 96
play_group.add(play)
play_group.update(ticks, 50)
screen.fill((50, 50, 100))
play_group.draw(screen)
pygame.display.update()
通過改變幀數修改，根據游戲的結束或是否移動，改變對應的事件
if not game_over:
play.first_frame = play.direction * play.columns
play.last_frame = play.first_frame + play.columns - 1
if play.frame < play.first_frame:
play.frame = play.first_frame
if not play_moving:
play.frame = play.first_frame = play.last_frame
else:
increment(play)
控制交互
if key[K_ESCAPE]:
sys.exit()
elif key[K_UP]:
play.direction = 0
play_moving = True
elif key[K_DOWN]:
play.direction = 4
play_moving = True
elif key[K_LEFT]:
play.direction = 6
play_moving = True
elif key[K_RIGHT]:
play.direction = 2
play_moving = True
else:
play_moving = False
添加僵尸
# 隨機生成20個僵尸
for n in range(0, 10):
zombie = MySprite()
random_direction = random.randint(0, 3) * 2
zombie.load("zombie walk.png", 96, 96, 8, random_direction, "僵尸")
zombie.rect.x = random.randint(0, 600)
zombie.rect.y = random.randint(0, 500)
print(zombie.rect)
zombie_group.add(zombie)
# 設置僵尸
for z in zombie_group:
z.first_frame = z.direction * z.columns
z.last_frame = z.first_frame + z.columns - 1
if z.frame < z.first_frame:
z.frame = z.first_frame
increment(z)
添加血包
血包就是單純的一個圖的展示。
health = MySprite()
health.load("health.png", 32, 32, 1)
health.rect.x = random.randint(0, 600)
health.rect.y = random.randint(0, 500)
health_group.add(health)
精靈相互碰撞事件
主要是僵尸和人 、人和血包之間的相撞事件
# 相撞事件
attack = None
attack = pygame.sprite.spritecollideany(play, zombie_group)
if attack is not None:
if pygame.sprite.collide_rect_ratio(0.5)(play, attack):
play_health -= 10
attack.rect.x = random.randint(0, 600)
attack.rect.y = random.randint(0, 500)
else:
attack = None
if pygame.sprite.collide_rect_ratio(0.5)(play, health):
play_health += 30
if play_health > 100:
play_health = 100
health.rect.x = random.randint(0, 600)
health.rect.y = random.randint(0, 500)
if play_health <= 0:
game_over = True
# 顯示血量
pygame.draw.rect(screen, (100, 200, 100, 180), Rect(300, 575, 200, 25))
pygame.draw.rect(screen, (50, 150, 150, 180), Rect(300, 575, play_health * 2, 25))
完整代碼
import pygame, sys, random
from pygame.locals import *
from mySprite1 import *
def print_text(font, x, y, text, color=(255, 255, 255)):
imgText = font.render(text, True, color)
screen.blit(imgText, (x, y))
def reversal_direction(mySprite):
direction = mySprite.direction
if direction == 0:
direction = 4
elif direction == 2:
direction = 6
elif direction == 4:
direction = 0
elif direction == 6:
direction = 2
mySprite.direction = direction
def increment(mySprite, offset=1):
# 上下左右
direction = mySprite.direction
rect = mySprite.rect
if direction == 0:
rect.y -= offset
elif direction == 2:
rect.x += offset
elif direction == 4:
rect.y += offset
elif direction == 6:
rect.x -= offset
# 超出邊界的處理
# 超出邊界flg
boundary = False
if rect.x < 0:
rect.x = 0
boundary = True
if rect.x + mySprite.frame_width > 800:
rect.x = 800 - mySprite.frame_width
boundary = True
if rect.y < 0:
rect.y = 0
boundary = True
if rect.y + mySprite.frame_height > 600:
rect.y = 600 - mySprite.frame_height
boundary = True
# 如果超出邊界而且是僵尸的話 則反轉方向
if boundary and mySprite.classification == "僵尸":
reversal_direction(mySprite)
# 設置窗口
pygame.init()
screen = pygame.display.set_mode((800, 600))
pygame.display.set_caption("勇闖后半夜")
font = pygame.font.Font(None, 30)
timer = pygame.time.Clock()
game_over = False
# 玩家
play_group = pygame.sprite.Group()
play = MySprite()
play.load("farmer walk.png", 96, 96, 8, 4)
play.rect.x = 96
play.rect.y = 96
play_moving = False
play_group.add(play)
play_health = 100
# 僵尸
zombie_group = pygame.sprite.Group()
# 隨機生成20個僵尸
for n in range(0, 10):
zombie = MySprite()
random_direction = random.randint(0, 3) * 2
zombie.load("zombie walk.png", 96, 96, 8, random_direction, "僵尸")
zombie.rect.x = random.randint(0, 600)
zombie.rect.y = random.randint(0, 500)
print(zombie.rect)
zombie_group.add(zombie)
# 血包
health_group = pygame.sprite.Group()
health = MySprite()
health.load("health.png", 32, 32, 1)
health.rect.x = random.randint(0, 600)
health.rect.y = random.randint(0, 500)
health_group.add(health)
while True:
# 設置執行的頻率
timer.tick(30)
ticks = pygame.time.get_ticks()
for event in pygame.event.get():
if event.type == QUIT:
sys.exit()
key = pygame.key.get_pressed()
if key[K_ESCAPE]:
sys.exit()
elif key[K_UP]:
play.direction = 0
play_moving = True
elif key[K_DOWN]:
play.direction = 4
play_moving = True
elif key[K_LEFT]:
play.direction = 6
play_moving = True
elif key[K_RIGHT]:
play.direction = 2
play_moving = True
else:
play_moving = False
if not game_over:
# 設置玩家
play.first_frame = play.direction * play.columns
play.last_frame = play.first_frame + play.columns - 1
if play.frame < play.first_frame:
play.frame = play.first_frame
# 設置僵尸
for z in zombie_group:
z.first_frame = z.direction * z.columns
z.last_frame = z.first_frame + z.columns - 1
if z.frame < z.first_frame:
z.frame = z.first_frame
increment(z)
if not play_moving:
play.frame = play.first_frame = play.last_frame
else:
increment(play)
# 相撞事件
attack = None
attack = pygame.sprite.spritecollideany(play, zombie_group)
if attack is not None:
if pygame.sprite.collide_rect_ratio(0.5)(play, attack):
play_health -= 10
attack.rect.x = random.randint(0, 600)
attack.rect.y = random.randint(0, 500)
else:
attack = None
if pygame.sprite.collide_rect_ratio(0.5)(play, health):
play_health += 30
if play_health > 100:
play_health = 100
health.rect.x = random.randint(0, 600)
health.rect.y = random.randint(0, 500)
if play_health <= 0:
game_over = True
play_group.update(ticks, 50)
zombie_group.update(ticks, 50)
health_group.update(ticks, 50)
screen.fill((50, 50, 100))
play_group.draw(screen)
zombie_group.draw(screen)
health_group.draw(screen)
# 顯示血量
pygame.draw.rect(screen, (100, 200, 100, 180), Rect(300, 575, 200, 25))
pygame.draw.rect(screen, (50, 150, 150, 180), Rect(300, 575, play_health * 2, 25))
if game_over:
print_text(font, 300, 100, "GAME OVER!!!")
pygame.display.update()
到此這篇關于利用Pygame制作躲避僵尸游戲的文章就介紹到這了,更多相關Pygame躲避僵尸游戲內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
您可能感興趣的文章:
相關文章
Pycharm中python調用另一個文件類或者函數
本文主要介紹了Pycharm中python調用另一個文件類或者函數，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2023-07-07
使用setup.py安裝python包和卸載python包的方法
這篇文章主要介紹了使用setup.py安裝python包和卸載python包的方法，大家參考使用吧2013-11-11
這篇文章主要為大家介紹了python深度學習tensorflow入門基礎教程示例詳解，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪2022-06-06
這篇文章主要介紹了python 實現批量圖片識別并翻譯，幫助大家利用python處理圖片，感興趣的朋友可以了解下2020-11-11
Python人工智能學習PyTorch實現WGAN示例詳解
這篇文章主要為大家介紹了人工智能學習PyTorch實現WGAN的示例詳解，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步2021-11-11
字符串是程序中最常見的數據類型。在Python中，可以使用三種方式定義字符串。單引號、雙引號和三引號。2009-09-09
這篇文章主要為大家詳細介紹了python中使用正則表達式的方法，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下，希望能夠給你帶來幫助2022-03-03
在做網站項目時，開發經常要給工程一個升級包，包含本次修改的內容，這個升級包的內容就是tomcat的發布目錄下的文件；2009-07-07
Python數據結構棧實現進制轉換簡單示例
眾所周知計算機的內存都是以二進制的形式進行數據存儲,下面這篇文章主要給大家介紹了關于Python數據結構棧實現進制轉換的相關資料,文中通過示例代碼介紹的非常詳細,需要的朋友可以參考下2023-02-02
這篇文章主要介紹了python使用torch隨機初始化參數，文章圍繞torch隨機初始化參數的相關資料展開文章詳細內容，具有一定的參考價值，需要的小伙伴可以參考一下，希望對你有所幫助2022-03-03