快捷導航

c#中WinForm用OpencvSharp實現ROI區域提取的示例

更新時間：2022年05月06日 10:11:31 作者：Iawfy_

已經自學OpencvSharp一段時間了，現在就分享一下我的學習過程，本文主要介紹了c#中WinForm用OpencvSharp實現ROI區域提取的示例，具有一定的參考價值，感興趣的可以了解一下

已經自學OpencvSharp一段時間了(目前工作用的是C#，就學了Opencvsharp了,vs2015，opencvsharp3)，收獲也有一些，現在就將我在學習過程中的收獲分享出來吧。

圖像處理，很常見的問題，但對于大多數時候而言，我們往往不需要去處理整張圖片，而是只需要處理一部分，這就涉及到了ROI(Region of interest)的提取了。我目前提取ROI的方法是采用掩膜Mask的方法。具體的思路就是：在圖像操作的時候，定義一張同等大小的空的Mask，也就是全部是0，然后將我們想要的ROI輪廓畫在Mask上，并填充內部，就會得到新的Mask，這個新的Mask就只有在ROI區域非0，其余地方元素都是0，再把用Cv2.BoundingRect()將包含ROI區域的輪廓的最小矩形找出來，分別將原圖與Mask這兩幅圖像的這個最小矩形部分提出來，最后再調用Cv2.BitwiseAnd()這個方法，通常情況而言，一副圖像與自己本身進行與運算,輸出的還是本身圖像，帶上掩膜Mask后，就只會輸出圖像在Mask非0區域部分(也就是我們所需要的ROI)的圖像了，這樣就實現了我們的ROI提取了。

接下來，就分享幾種常見ROI區域提取吧。

部分代碼如下：

主要使用的變量

         /// 放在yVars.ImgOptions中 
   public struct ROIMatt   
            {
                public static string Image;//原圖  
                public static bool IsSelectRegion = false;
 
                public static int step; //ROI區域移動步長
                public static int angel; // 旋轉一次 angel±=step; 旋轉角度 
 
                public static yDirections direct = yDirections.NULL;
                public static yROIRegionType ROIType = yROIRegionType.Rectangle;
 
                // 矩形ROI
                // 矩形四個點坐標 都是相對于圖像的坐標 而不是相對于picturebox的坐標
                // 矩形四個點相對位置 剛開始確定矩形時就這樣 經過旋轉后位置變 但相對位置還是這樣
                //  1  2      // 按順時針數的點   1-->2-->4-->3-->1-->2-->4-->3-->1
                //  3  4
                public static OpenCvSharp.Point rectFirstPoint = new OpenCvSharp.Point();
                public static OpenCvSharp.Point rectSecondPoint = new OpenCvSharp.Point();
                public static OpenCvSharp.Point rectThirdPoint = new OpenCvSharp.Point();
                public static OpenCvSharp.Point rectFourthPoint = new OpenCvSharp.Point(); 
                public static double rectWidth = 0;
                public static double rectHeight = 0;
 
                // 圓形ROI
                public static OpenCvSharp.Point cirCenter = new OpenCvSharp.Point(0.0,0.0); // 圓心
                public static int cirRadious = 0; // 半徑
                // 橢圓ROI
                public static OpenCvSharp.Point elpCenter = new OpenCvSharp.Point(0.0,0.0); // 橢圓中心點
                public static double elpAngel = 0.0;//橢圓傾斜角度
                public static double elpLongAxis = 0.0; // 長軸
                public static double elpShortAxis = 0.0; // 短軸
            }

我的picturebox的SizeMode是StretchImage的，可能看起來跟想要的結果有點差異，但是實際上是一樣的。

首先是最常見的矩形。

對于正矩形而言，我們可以直接定義出圖像的ROI區域

public Mat(Mat m, Rect roi);

這樣定義的圖像就是原圖m的指定區域了。但對于傾斜的矩陣，RotatedRect，而言，就得需要使用掩膜了，提取ROI的方法以及結果如下：

        public static void ImgMattingRect()
        {
            Mat pic = new Mat(yVars.ImgOptions.ROIMatt.Image);
            Mat mask = Mat.Zeros(pic.Size(), MatType.CV_8UC1);
            OpenCvSharp.Point2f[] coutours = new OpenCvSharp.Point2f[4];
            coutours[0] = yVars.ImgOptions.ROIMatt.rectFirstPoint;
            coutours[1] = yVars.ImgOptions.ROIMatt.rectSecondPoint;
            coutours[2] = yVars.ImgOptions.ROIMatt.rectFourthPoint;
            coutours[3] = yVars.ImgOptions.ROIMatt.rectThirdPoint;
 
            List<OpenCvSharp.Point> listt = new List<OpenCvSharp.Point>();
            for (int i = 0; i < coutours.Count(); i++)
            {
                listt.Add(new OpenCvSharp.Point(coutours[i].X, coutours[i].Y));
            }
 
            List<List<OpenCvSharp.Point>> pp = new List<List<OpenCvSharp.Point>>() { listt };
 
            Cv2.FillPoly(mask, pp, new Scalar(255, 255, 255)); 
            OpenCvSharp.Rect rect = Cv2.BoundingRect(coutours);
            Mat src = new Mat(pic, rect);
            Mat maskROI = new Mat(mask, rect);
            Mat picOut = new Mat();
            Cv2.BitwiseAnd(src, src, picOut, maskROI);
            Form1.Instance.pbxMattImage.Image = yImgConvert.MatToBitmap(picOut);
 
            yVars.ImgOptions.ROIMatt.rectFirstPoint = new OpenCvSharp.Point(0, 0);
            yVars.ImgOptions.ROIMatt.rectSecondPoint = new OpenCvSharp.Point(0, 0);
            yVars.ImgOptions.ROIMatt.rectThirdPoint = new OpenCvSharp.Point(0, 0);
            yVars.ImgOptions.ROIMatt.rectFourthPoint = new OpenCvSharp.Point(0, 0);
        }

縮放平移和旋轉就只要改變矩形的四個頂點坐標就行了。方法都一樣就不贅述了。

圓形ROI區域,

方法如下：

        public static void ImgMattingCircle()
        {
            Mat mm = new Mat(yVars.ImgOptions.ROIMatt.Image);
            Mat mask = Mat.Zeros(mm.Size(), MatType.CV_8UC3);
 
            Cv2.Circle(mask, yVars.ImgOptions.ROIMatt.cirCenter, yVars.ImgOptions.ROIMatt.cirRadious, Scalar.Red, 1, LineTypes.AntiAlias);
            Cv2.FloodFill(mask, yVars.ImgOptions.ROIMatt.cirCenter, Scalar.Red);
 
            mask.ConvertTo(mask, MatType.CV_8UC1);
 
            int xx = yVars.ImgOptions.ROIMatt.cirCenter.X - yVars.ImgOptions.ROIMatt.cirRadious;
            int yy = yVars.ImgOptions.ROIMatt.cirCenter.Y - yVars.ImgOptions.ROIMatt.cirRadious;
            int rr = 2 * yVars.ImgOptions.ROIMatt.cirRadious;
            // 圓的外接正方形
            Rect rect = new Rect(new OpenCvSharp.Point(xx, yy), new OpenCvSharp.Size(rr, rr));
 
            Mat src = new Mat(mm, rect);
            Mat maskRoI = new Mat(mask, rect);
 
            Cv2.CvtColor(maskRoI, maskRoI, ColorConversionCodes.BGR2GRAY);
 
            Mat picOut = new Mat();
            Cv2.BitwiseAnd(src, src, picOut, maskRoI);
 
            Form1.Instance.pbxMattImage.Image = yImgConvert.MatToBitmap(picOut);
 
            yVars.ImgOptions.ROIMatt.cirCenter = new OpenCvSharp.Point(0, 0);
            yVars.ImgOptions.ROIMatt.cirRadious = 0;
        }

效果展示:

圓形ROI的移動時就只有圓心坐標變半徑不變，而縮放時只改變半徑，圓心不變，注意移動時別超出圖像界限就行。

橢圓ROI

在Opencvsharp中繪制橢圓有兩種方式

        //
        // 摘要:
        //     Draws simple or thick elliptic arc or fills ellipse sector
        //
        // 參數:
        //   img:
        //     Image.
        //
        //   box:
        //     The enclosing box of the ellipse drawn
        //
        //   color:
        //     Ellipse color.
        //
        //   thickness:
        //     Thickness of the ellipse boundary. [By default this is 1]
        //
        //   lineType:
        //     Type of the ellipse boundary. [By default this is LineType.Link8]
        public static void Ellipse(InputOutputArray img, RotatedRect box, Scalar color, int thickness = 1, LineTypes lineType = LineTypes.Link8);
        //
        // 摘要:
        //     Draws simple or thick elliptic arc or fills ellipse sector
        //
        // 參數:
        //   img:
        //     Image.
        //
        //   center:
        //     Center of the ellipse.
        //
        //   axes:
        //     Length of the ellipse axes.
        //
        //   angle:
        //     Rotation angle.
        //
        //   startAngle:
        //     Starting angle of the elliptic arc.
        //
        //   endAngle:
        //     Ending angle of the elliptic arc.
        //
        //   color:
        //     Ellipse color.
        //
        //   thickness:
        //     Thickness of the ellipse arc. [By default this is 1]
        //
        //   lineType:
        //     Type of the ellipse boundary. [By default this is LineType.Link8]
        //
        //   shift:
        //     Number of fractional bits in the center coordinates and axes' values. [By default
        //     this is 0]
        public static void Ellipse(InputOutputArray img, Point center, Size axes, double angle, double startAngle, double endAngle, Scalar color, int thickness = 1, LineTypes lineType = LineTypes.Link8, int shift = 0);

我們采用第一種方式，即可以將橢圓轉化成一個RotatedRect，只要在畫RotatedRect的時候改成畫橢圓即可，就可以回到第一種矩形的ROI提取上面了，代碼如下：

        public static void ImgMattingEllipse()
        {
            Mat mm = new Mat(yVars.ImgOptions.ROIMatt.Image);
            Mat mask = Mat.Zeros(mm.Size(), MatType.CV_8UC3);
 
            RotatedRect rorect = new RotatedRect(yVars.ImgOptions.ROIMatt.elpCenter, new Size2f(yVars.ImgOptions.ROIMatt.elpLongAxis, yVars.ImgOptions.ROIMatt.elpShortAxis), (float)yVars.ImgOptions.ROIMatt.elpAngel);
            Cv2.Ellipse(mask, rorect, Scalar.Red);
 
            Mat gray = new Mat();
            Cv2.CvtColor(mask, gray, ColorConversionCodes.BGR2GRAY);
            Cv2.Threshold(gray, gray, 100, 255, ThresholdTypes.Otsu);
 
            OpenCvSharp.Point[][] contours;
            HierarchyIndex[] hierarchly;
            Cv2.FindContours(gray, out contours, out hierarchly, RetrievalModes.Tree, ContourApproximationModes.ApproxSimple, new OpenCvSharp.Point(0, 0));
 
            Rect rect = Cv2.BoundingRect(contours[0]);
 
            Cv2.FloodFill(mask, yVars.ImgOptions.ROIMatt.elpCenter, Scalar.Red);
 
            mask.ConvertTo(mask, MatType.CV_8UC1);
 
            Mat src = new Mat(mm, rect);
            Mat maskRoI = new Mat(mask, rect);
            Cv2.CvtColor(maskRoI, maskRoI, ColorConversionCodes.BGR2GRAY);
            Mat picOut = new Mat();
            Cv2.BitwiseAnd(src, src, picOut, maskRoI);
 
            Form1.Instance.pbxMattImage.Image = yImgConvert.MatToBitmap(picOut);
        }

實驗結果如下：

平移縮放旋轉等操作就可以看成對RotatedRect的操作即可。

到此這篇關于c#中WinForm用OpencvSharp實現ROI區域提取的示例的文章就介紹到這了,更多相關c# ROI區域提取內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: