Java中多線程Reactor模式的實現

更新時間：2021年12月03日 10:07:54 作者：西伯利亞愛學習的狼

多線程Reactor模式旨在分配多個reactor每一個reactor獨立擁有一個selector，本文就詳細的來介紹一下Java中多線程Reactor模式的實現,需要的朋友可以參考下

讓負責管理連接的Handler處理連接，其中在這個負責連接的Handler處理器中創建子Handler用以處理IO請求。這樣一來連接請求與IO請求分開執行提高通道的并發量。同時多個Reactor帶來的好處是多個selector可以提高通道的檢索速度

1、主服務器

package com.crazymakercircle.ReactorModel;

import com.crazymakercircle.NioDemoConfig;
import com.crazymakercircle.util.Logger;

import java.io.IOException;
import java.net.InetSocketAddress;
import java.nio.channels.SelectionKey;
import java.nio.channels.Selector;
import java.nio.channels.ServerSocketChannel;
import java.nio.channels.SocketChannel;
import java.util.Iterator;
import java.util.Set;
import java.util.concurrent.atomic.AtomicInteger;


class MultiThreadEchoServerReactor {
    ServerSocketChannel serverSocket;
    AtomicInteger next = new AtomicInteger(0);
    Selector bossSelector = null;
    Reactor bossReactor = null;
    //selectors集合,引入多個selector選擇器
    //多個選擇器可以更好的提高通道的并發量
    Selector[] workSelectors = new Selector[2];
    //引入多個子反應器
    //如果CPU是多核的可以開啟多個子Reactor反應器,這樣每一個子Reactor反應器還可以獨立分配一個線程。
    //每一個線程可以單獨綁定一個單獨的Selector選擇器以提高通道并發量
    Reactor[] workReactors = null;

    MultiThreadEchoServerReactor() throws IOException {

        bossSelector = Selector.open();
        //初始化多個selector選擇器
        workSelectors[0] = Selector.open();
        workSelectors[1] = Selector.open();
        serverSocket = ServerSocketChannel.open();

        InetSocketAddress address =
                new InetSocketAddress(NioDemoConfig.SOCKET_SERVER_IP,
                        NioDemoConfig.SOCKET_SERVER_PORT);
        serverSocket.socket().bind(address);
        //非阻塞
        serverSocket.configureBlocking(false);

        //第一個selector,負責監控新連接事件
        SelectionKey sk =
                serverSocket.register(bossSelector, SelectionKey.OP_ACCEPT);
        //附加新連接處理handler處理器到SelectionKey（選擇鍵）
        sk.attach(new AcceptorHandler());

        //處理新連接的反應器
        bossReactor = new Reactor(bossSelector);

        //第一個子反應器，一子反應器負責一個選擇器
        Reactor subReactor1 = new Reactor(workSelectors[0]);
        //第二個子反應器，一子反應器負責一個選擇器
        Reactor subReactor2 = new Reactor(workSelectors[1]);
        workReactors = new Reactor[]{subReactor1, subReactor2};
    }

    private void startService() {
        new Thread(bossReactor).start();
        // 一子反應器對應一條線程
        new Thread(workReactors[0]).start();
        new Thread(workReactors[1]).start();
    }

    //反應器
    class Reactor implements Runnable {
        //每條線程負責一個選擇器的查詢
        final Selector selector;

        public Reactor(Selector selector) {
            this.selector = selector;
        }

        public void run() {
            try {
                while (!Thread.interrupted()) {
                    //單位為毫秒
                    //每隔一秒列出選擇器感應列表
                    selector.select(1000);
                    Set<SelectionKey> selectedKeys = selector.selectedKeys();
                    if (null == selectedKeys || selectedKeys.size() == 0) {
                        //如果列表中的通道注冊事件沒有發生那就繼續執行
                        continue;
                    }
                    Iterator<SelectionKey> it = selectedKeys.iterator();
                    while (it.hasNext()) {
                        //Reactor負責dispatch收到的事件
                        SelectionKey sk = it.next();
                        dispatch(sk);
                    }
                    //清楚掉已經處理過的感應事件，防止重復處理
                    selectedKeys.clear();
                }
            } catch (IOException ex) {
                ex.printStackTrace();
            }
        }


        void dispatch(SelectionKey sk) {
            Runnable handler = (Runnable) sk.attachment();
            //調用之前attach綁定到選擇鍵的handler處理器對象
            if (handler != null) {
                handler.run();
            }
        }
    }


    // Handler:新連接處理器
    class AcceptorHandler implements Runnable {
        public void run() {
        try {
                SocketChannel channel = serverSocket.accept();
                Logger.info("接收到一個新的連接");

                if (channel != null) {
                    int index = next.get();
                    Logger.info("選擇器的編號：" + index);
                    Selector selector = workSelectors[index];
                    new MultiThreadEchoHandler(selector, channel);
                }
            } catch (IOException e) {
                e.printStackTrace();
            }
            if (next.incrementAndGet() == workSelectors.length) {
                next.set(0);
            }
        }
    }


    public static void main(String[] args) throws IOException {
        MultiThreadEchoServerReactor server =
                new MultiThreadEchoServerReactor();
        server.startService();
    }

}

按上述的設計思想，在主服務器中實際上設計了三個Reactor，一個主Reactor專門負責連接請求并配已單獨的selector，但是三個Reactor的線程Run函數是做的相同的功能，都是根據每個線程內部的selector進行檢索事件列表，若注冊的監聽事件發生了則調用dispactch分發到每個Reactor對應的Handler。

這里需要注意的一開始其實只有負責連接事件的主Reactor在注冊selector的時候給相應的key配了一個AcceptorHandler()。

 //第一個selector,負責監控新連接事件
        SelectionKey sk =
                serverSocket.register(bossSelector, SelectionKey.OP_ACCEPT);
        //附加新連接處理handler處理器到SelectionKey（選擇鍵）
        sk.attach(new AcceptorHandler());

但是Reactor的run方法里若相應的selector key發生了便要dispatch到一個Handler。這里其他兩個子Reactor的Handler在哪里賦值的呢？其實在處理連接請求的Reactor中便創建了各個子Handler,如下代碼所示：
主Handler中先是根據服務器channel創建出客服端channel,在進行子selector與channel的綁定。

                   int index = next.get();
                   Logger.info("選擇器的編號：" + index);
                   Selector selector = workSelectors[index];
                   new MultiThreadEchoHandler(selector, channel);

2、IO請求handler+線程池

package com.crazymakercircle.ReactorModel;


import com.crazymakercircle.util.Logger;

import java.io.IOException;
import java.nio.ByteBuffer;
import java.nio.channels.SelectionKey;
import java.nio.channels.Selector;
import java.nio.channels.SocketChannel;
import java.util.concurrent.ExecutorService;
import java.util.concurrent.Executors;

class MultiThreadEchoHandler implements Runnable {
    final SocketChannel channel;
    final SelectionKey sk;
    final ByteBuffer byteBuffer = ByteBuffer.allocate(1024);
    static final int RECIEVING = 0, SENDING = 1;
    int state = RECIEVING;
    //引入線程池
    static ExecutorService pool = Executors.newFixedThreadPool(4);

    MultiThreadEchoHandler(Selector selector, SocketChannel c) throws IOException {
        channel = c;
        channel.configureBlocking(false);

        //喚醒選擇,防止register時 boss線程被阻塞，netty 處理方式比較優雅，會在同一個線程注冊事件，避免阻塞boss
        selector.wakeup();

        //僅僅取得選擇鍵，后設置感興趣的IO事件
        sk = channel.register(selector, 0);
        //將本Handler作為sk選擇鍵的附件，方便事件dispatch
        sk.attach(this);
        //向sk選擇鍵注冊Read就緒事件
        sk.interestOps(SelectionKey.OP_READ);

        //喚醒選擇，是的OP_READ生效
        selector.wakeup();
        Logger.info("新的連接 注冊完成");

    }

    public void run() {
        //異步任務，在獨立的線程池中執行
        pool.execute(new AsyncTask());
    }

    //異步任務，不在Reactor線程中執行
    public synchronized void asyncRun() {
        try {
            if (state == SENDING) {
                //寫入通道
                channel.write(byteBuffer);

                //寫完后,準備開始從通道讀,byteBuffer切換成寫模式
                byteBuffer.clear();
                //寫完后,注冊read就緒事件
                sk.interestOps(SelectionKey.OP_READ);
                //寫完后,進入接收的狀態
                state = RECIEVING;
            } else if (state == RECIEVING) {
                //從通道讀
                int length = 0;
                while ((length = channel.read(byteBuffer)) > 0) {
                    Logger.info(new String(byteBuffer.array(), 0, length));
                }
                //讀完后，準備開始寫入通道,byteBuffer切換成讀模式
                byteBuffer.flip();
                //讀完后，注冊write就緒事件
                sk.interestOps(SelectionKey.OP_WRITE);
                //讀完后,進入發送的狀態
                state = SENDING;
            }
            //處理結束了, 這里不能關閉select key，需要重復使用
            //sk.cancel();
        } catch (IOException ex) {
            ex.printStackTrace();
        }
    }

    //異步任務的內部類
    class AsyncTask implements Runnable {
        public void run() {
            MultiThreadEchoHandler.this.asyncRun();
        }
    }
}

3、客戶端

在處理IO請求的Handler中采用了線程池，已達到異步處理的目的。

package com.crazymakercircle.ReactorModel;

import com.crazymakercircle.NioDemoConfig;
import com.crazymakercircle.util.Dateutil;
import com.crazymakercircle.util.Logger;

import java.io.IOException;
import java.net.InetSocketAddress;
import java.nio.ByteBuffer;
import java.nio.channels.SelectionKey;
import java.nio.channels.Selector;
import java.nio.channels.SocketChannel;
import java.util.Iterator;
import java.util.Scanner;
import java.util.Set;

/**
 * create by 尼恩 @ 瘋狂創客圈
 **/
public class EchoClient {

    public void start() throws IOException {

        InetSocketAddress address =
                new InetSocketAddress(NioDemoConfig.SOCKET_SERVER_IP,
                        NioDemoConfig.SOCKET_SERVER_PORT);

        // 1、獲取通道（channel）
        SocketChannel socketChannel = SocketChannel.open(address);
        Logger.info("客戶端連接成功");
        // 2、切換成非阻塞模式
        socketChannel.configureBlocking(false);
        //不斷的自旋、等待連接完成，或者做一些其他的事情
        while (!socketChannel.finishConnect()) {

        }
        Logger.tcfo("客戶端啟動成功！");

        //啟動接受線程
        Processer processer = new Processer(socketChannel);
        new Thread(processer).start();

    }

    static class Processer implements Runnable {
        final Selector selector;
        final SocketChannel channel;

        Processer(SocketChannel channel) throws IOException {
            //Reactor初始化
            selector = Selector.open();
            this.channel = channel;
            channel.register(selector,
                    SelectionKey.OP_READ | SelectionKey.OP_WRITE);
        }

        public void run() {
            try {
                while (!Thread.interrupted()) {
                    selector.select();
                    Set<SelectionKey> selected = selector.selectedKeys();
                    Iterator<SelectionKey> it = selected.iterator();
                    while (it.hasNext()) {
                        SelectionKey sk = it.next();
                        if (sk.isWritable()) {
                            ByteBuffer buffer = ByteBuffer.allocate(NioDemoConfig.SEND_BUFFER_SIZE);

                            Scanner scanner = new Scanner(System.in);
                            Logger.tcfo("請輸入發送內容:");
                            if (scanner.hasNext()) {
                                SocketChannel socketChannel = (SocketChannel) sk.channel();
                                String next = scanner.next();
                                buffer.put((Dateutil.getNow() + " >>" + next).getBytes());
                                buffer.flip();
                                // 操作三：發送數據
                                socketChannel.write(buffer);
                                buffer.clear();
                            }

                        }
                        if (sk.isReadable()) {
                            // 若選擇鍵的IO事件是“可讀”事件,讀取數據
                            SocketChannel socketChannel = (SocketChannel) sk.channel();

                            //讀取數據
                            ByteBuffer byteBuffer = ByteBuffer.allocate(1024);
                            int length = 0;
                            while ((length = socketChannel.read(byteBuffer)) > 0) {
                                byteBuffer.flip();
                                Logger.info("server echo:" + new String(byteBuffer.array(), 0, length));
                                byteBuffer.clear();
                            }

                        }
                        //處理結束了, 這里不能關閉select key，需要重復使用
                        //selectionKey.cancel();
                    }
                    selected.clear();
                }
            } catch (IOException ex) {
                ex.printStackTrace();
            }
        }
    }

    public static void main(String[] args) throws IOException {
        new EchoClient().start();
    }
}

到此這篇關于Java中多線程Reactor模式的實現的文章就介紹到這了,更多相關Java 多線程Reactor內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: