asp.net通過HttpModule自動在Url地址上添加參數
更新時間:2010年01月14日 00:20:07 作者:
由于項目中有許多頁面需要用到cid參數,所以想通過傳值cid來獲取數據。
然而手機客戶端又不支持Session和Cookie傳值,其他方法給頁面賦值再傳值顯得太麻煩了,而且還不易維護,容易弄丟出錯,于是想到了用HttpModule來把cid參數賦在Url地址上,讓url把cid參數每頁自動傳遞下去,需要用cid時只要通過Requet["cid"]獲取,這樣就不用為傳值而煩惱了。
以下是配置方法和源碼。
1)在web.config配置文件中添加以下節點
<httpModules>
<add name="HttpModule" type="ThreeHegemony.Utility.AutoAddCid"/>
</httpModules>
2)通過繼承IHttpModule來實現url傳值。
代碼
using System;
using System.Text;
using System.Web;
using System.IO;
using System.Text.RegularExpressions;
namespace ThreeHegemony.Utility
{
/// <summary>
/// Auther: Jess.zou
/// Create data: 2009-08-06
/// Description: 該類作用在Url地址后自動添加(cid)
/// </summary>
public class AutoAddCid : System.Web.IHttpModule
{
public void Init(HttpApplication context)
{
context.PostRequestHandlerExecute += new EventHandler(this.OnPreSendRequestContent);
}
protected void OnPreSendRequestContent(Object sender, EventArgs e)
{
System.Web.HttpApplication myContext = (System.Web.HttpApplication)sender;
myContext.Response.Filter = new AppendSIDFilter(myContext.Response.Filter);
}
private void ReUrl_BeginRequest(object sender, EventArgs e)
{
string cid = "";
string url = "";
HttpContext context = ((HttpApplication)sender).Context;
if (string.IsNullOrEmpty(context.Request.QueryString["cid"]))
{
if (context.Request.QueryString.Count == 0)
{
url = string.Format("{0}?cid={1}", context.Request.RawUrl, cid);
}
else
{
url = string.Format("{0}&cid={1}", context.Request.RawUrl, cid);
}
}
context.RewritePath(url);
}
public void Dispose() { }
public class AppendSIDFilter : Stream
{
private Stream Sink { get; set; }
private long _position;
private System.Text.StringBuilder oOutput = new StringBuilder();
public AppendSIDFilter(Stream sink)
{
Sink = sink;
}
public override bool CanRead
{
get { return true; }
}
public override bool CanSeek
{
get { return true; }
}
public override bool CanWrite
{
get { return true; }
}
public override long Length
{
get { return 0; }
}
public override long Position
{
get { return _position; }
set { _position = value; }
}
public override long Seek(long offset, System.IO.SeekOrigin direction)
{
return Sink.Seek(offset, direction);
}
public override void SetLength(long length)
{
Sink.SetLength(length);
}
public override void Close()
{
Sink.Close();
}
public override void Flush()
{
Sink.Flush();
}
public override int Read(byte[] buffer, int offset, int count)
{
return Sink.Read(buffer, offset, count);
}
public override void Write(byte[] buffer, int offset, int count)
{
if (string.IsNullOrEmpty(HttpContext.Current.Request["cid"]))
{
Sink.Write(buffer, 0, buffer.Length);
return;
}
string content = System.Text.UTF8Encoding.UTF8.GetString(buffer, offset, count);
Regex regex = new Regex(RegexResource.HREF, RegexOptions.IgnoreCase);
Regex action_regex = new Regex(RegexResource.ACTION, RegexOptions.IgnoreCase);
if (regex.IsMatch(content))
{
content = Regex.Replace(content, RegexResource.HREF, new MatchEvaluator(ReplaceSID), RegexOptions.Compiled | RegexOptions.IgnoreCase);
}
if (action_regex.IsMatch(content))
{
content = Regex.Replace(content, RegexResource.ACTION, new MatchEvaluator(ReplaceSID), RegexOptions.Compiled | RegexOptions.IgnoreCase);
}
byte[] data = System.Text.UTF8Encoding.UTF8.GetBytes(content);
Sink.Write(data, 0, data.Length);
}
public static string ReplaceSID(Match match)
{
if (match.Value.IndexOf("cid=") != -1)
{
return match.Value;
}
string result;
if (match.Value.IndexOf('?') == -1)
{
result = match.Value.Insert(match.Value.Length - 1, "?cid=" + HttpContext.Current.Request["cid"]);
}
else
{
result = match.Value.Insert(match.Value.Length - 1, "&cid=" + HttpContext.Current.Request["cid"]);
}
return result;
}
}
}
}
以下是配置方法和源碼。
1)在web.config配置文件中添加以下節點
復制代碼 代碼如下:
<httpModules>
<add name="HttpModule" type="ThreeHegemony.Utility.AutoAddCid"/>
</httpModules>
2)通過繼承IHttpModule來實現url傳值。
代碼
復制代碼 代碼如下:
using System;
using System.Text;
using System.Web;
using System.IO;
using System.Text.RegularExpressions;
namespace ThreeHegemony.Utility
{
/// <summary>
/// Auther: Jess.zou
/// Create data: 2009-08-06
/// Description: 該類作用在Url地址后自動添加(cid)
/// </summary>
public class AutoAddCid : System.Web.IHttpModule
{
public void Init(HttpApplication context)
{
context.PostRequestHandlerExecute += new EventHandler(this.OnPreSendRequestContent);
}
protected void OnPreSendRequestContent(Object sender, EventArgs e)
{
System.Web.HttpApplication myContext = (System.Web.HttpApplication)sender;
myContext.Response.Filter = new AppendSIDFilter(myContext.Response.Filter);
}
private void ReUrl_BeginRequest(object sender, EventArgs e)
{
string cid = "";
string url = "";
HttpContext context = ((HttpApplication)sender).Context;
if (string.IsNullOrEmpty(context.Request.QueryString["cid"]))
{
if (context.Request.QueryString.Count == 0)
{
url = string.Format("{0}?cid={1}", context.Request.RawUrl, cid);
}
else
{
url = string.Format("{0}&cid={1}", context.Request.RawUrl, cid);
}
}
context.RewritePath(url);
}
public void Dispose() { }
public class AppendSIDFilter : Stream
{
private Stream Sink { get; set; }
private long _position;
private System.Text.StringBuilder oOutput = new StringBuilder();
public AppendSIDFilter(Stream sink)
{
Sink = sink;
}
public override bool CanRead
{
get { return true; }
}
public override bool CanSeek
{
get { return true; }
}
public override bool CanWrite
{
get { return true; }
}
public override long Length
{
get { return 0; }
}
public override long Position
{
get { return _position; }
set { _position = value; }
}
public override long Seek(long offset, System.IO.SeekOrigin direction)
{
return Sink.Seek(offset, direction);
}
public override void SetLength(long length)
{
Sink.SetLength(length);
}
public override void Close()
{
Sink.Close();
}
public override void Flush()
{
Sink.Flush();
}
public override int Read(byte[] buffer, int offset, int count)
{
return Sink.Read(buffer, offset, count);
}
public override void Write(byte[] buffer, int offset, int count)
{
if (string.IsNullOrEmpty(HttpContext.Current.Request["cid"]))
{
Sink.Write(buffer, 0, buffer.Length);
return;
}
string content = System.Text.UTF8Encoding.UTF8.GetString(buffer, offset, count);
Regex regex = new Regex(RegexResource.HREF, RegexOptions.IgnoreCase);
Regex action_regex = new Regex(RegexResource.ACTION, RegexOptions.IgnoreCase);
if (regex.IsMatch(content))
{
content = Regex.Replace(content, RegexResource.HREF, new MatchEvaluator(ReplaceSID), RegexOptions.Compiled | RegexOptions.IgnoreCase);
}
if (action_regex.IsMatch(content))
{
content = Regex.Replace(content, RegexResource.ACTION, new MatchEvaluator(ReplaceSID), RegexOptions.Compiled | RegexOptions.IgnoreCase);
}
byte[] data = System.Text.UTF8Encoding.UTF8.GetBytes(content);
Sink.Write(data, 0, data.Length);
}
public static string ReplaceSID(Match match)
{
if (match.Value.IndexOf("cid=") != -1)
{
return match.Value;
}
string result;
if (match.Value.IndexOf('?') == -1)
{
result = match.Value.Insert(match.Value.Length - 1, "?cid=" + HttpContext.Current.Request["cid"]);
}
else
{
result = match.Value.Insert(match.Value.Length - 1, "&cid=" + HttpContext.Current.Request["cid"]);
}
return result;
}
}
}
}
您可能感興趣的文章:
- ASP.NET Core 1.0 部署 HTTPS(.NET Core 1.0)
- 運行asp.net時出現 http錯誤404-文件或目錄未找到
- Asp.net XMLHTTP封裝類(GET,Post發送和接收數據)
- asp.net HttpWebRequest自動識別網頁編碼
- asp.net 模擬提交有文件上傳的表單(通過http模擬上傳文件)
- Javascript+XMLHttpRequest+asp.net無刷新讀取數據庫數據
- asp.net利用HttpModule實現防sql注入
- asp.net 客戶端瀏覽器緩存的Http頭介紹
- ASP.NET MVC Web API HttpClient簡介
- ASP.NET Core Kestrel 中使用 HTTPS (SSL)
相關文章
asp.net SqlParameter如何根據條件有選擇的添加參數
有時候寫sql語句的時候會根據方法傳進來的參數來判斷sql語句中where條件的參數,下面有個示例,大家可以參考下2014-06-06ASP.NET Core依賴注入系列教程之控制反轉(IoC)
這篇文章主要給大家介紹了關于ASP.NET Core依賴注入系列教程之控制反轉(IoC)的相關資料,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2018-11-11Asp.net 2.0 無刷新圖片上傳 顯示縮略圖 具體實現
簡單三步實現圖片無刷新上傳:注意是上傳,至于上傳時的驗證,比如圖片的尺寸,大小,格式。自行解決。如果我搞定了,也會貼上來的。2013-06-06Visual Studio 2017正式版發布 亮點看這里
終于等到你,最強 IDE Visual Studio 2017 正式版發布,這篇文章主要為大家詳細解析了Visual Studio 2017正式版發布的細節,亮點看這里2017-03-03一個比較通用的分頁控件,完整的設計時支持和比較流行的分頁模式(提供源碼下載)
本分頁控件還包含簡單屬性,復雜屬性,自定義視圖狀態,分頁事件,創建控件,render控件,Attribute,設計時支持等比較齊全的自定義控件的元素,是個不錯學習自定義控件開發的例子2010-12-12