使用C#實現數據結構堆的代碼

更新時間：2021年02月05日 14:27:44 作者：JN-SHao

這篇文章主要介紹了使用C#實現數據結構堆，本文通過實例代碼給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下

一、堆的介紹：

　　堆是用來排序的，通常是一個可以被看做一棵樹的數組對象。堆滿足已下特性：

　　1. 堆中某個節點的值總是不大于或不小于其父節點的值

　　任意節點的值小于（或大于）它的所有后裔，所以最小元（或最大元）在堆的根節點上（堆序性）。堆有大根堆和小根堆，將根節點最大的堆叫做最大堆或大根堆，根節點最小的堆叫做最小堆或小根堆。

　　2. 堆總是一棵完全二叉樹

　　除了最底層，其他層的節點都被元素填滿，且最底層盡可能地從左到右填入?！?/p>

　　堆示意圖：

　　將堆元素從上往下從左到右放進數組對象中，子父節點索引滿足關系：

　　parentIndex = （index+1）/ 2 - 1;

　　childLeftIndex = parentIndex * 2 + 1;

　　childRightIndex = (parentIndex + 1) * 2;

　　其中：index為任一節點索引；parentIndex該節點父索引；childLeftIndex該父節點下的子左節點；childRightIndex該父節點下的子右節點。

　　創建堆的大概思路：　

　　1. 向堆中添加元素：

　　加到數組尾處，循環比對其父節點值（大根堆和小根堆比對策略不一樣），比對結果的目標索引不是父節點索引則交換子父節點元素，繼續向上比對其父父節點…；直至比對過程中目標索引為父節點索引或達到根節點結束，新堆創建完成。

　　2. 向堆中取出元素：

　　取出根節點元素，并將堆末尾元素插入根節點（為了保證堆的完全二叉樹特性），從根部再循環向下比對父節點、子左節點、子右節點值，比對結果目標索引不為父節點交換目標索引和父節點的值，向下繼續比對；直至比對過程中目標索引為父節點索引或達到堆尾部結束，新堆創建完成。

二、代碼實現：

　　因為大根堆和小根堆只是比較策略不同，所以整合了兩者，用的時候可以直接設置堆的類別；默認小根堆，默認比較器。實現代碼如下：

public class Heap<T>
 {
  private T[] _array;//數組，存放堆數據
  private int _count;//堆數據數量
  private HeapType _typeName;//堆類型
  private const int _DefaultCapacity = 4;//默認數組容量/最小容量
  private const int _ShrinkThreshold = 50;//收縮閾值（百分比）
  private const int _MinimumGrow = 4;//最小擴容量
  private const int _GrowFactor = 200; // 數組擴容百分比,默認2倍
  private IComparer<T> _comparer;//比較器
  private Func<T, T, bool> _comparerFunc;//比較函數

  //堆數據數量
  public int Count => _count;
  //堆類型
  public HeapType TypeName => _typeName;


  public Heap() : this(_DefaultCapacity, HeapType.MinHeap, null) { }
  public Heap(int capacity) : this(capacity, HeapType.MinHeap, null) { }
  public Heap(HeapType heapType) : this(_DefaultCapacity, heapType, null) { }
  public Heap(int capacity, HeapType heapType, IComparer<T> comparer)
  {
   Init(capacity, heapType, comparer);
  }
  public Heap(IEnumerable<T> collection, HeapType heapType, IComparer<T> comparer)
  {
   if (collection == null)
    throw new IndexOutOfRangeException();
   Init(collection.Count(), heapType, comparer);
   using (IEnumerator<T> en = collection.GetEnumerator())//避免T在GC堆中有非托管資源，GC不能釋放，需手動
   {
    while (en.MoveNext())
     Enqueue(en.Current);
   }
  }
  private void Init(int capacity, HeapType heapType, IComparer<T> comparer)
  {
   if (capacity < 0)
    throw new IndexOutOfRangeException();
   _count = 0;
   _array = new T[capacity];
   _comparer = comparer ?? Comparer<T>.Default;
   _typeName = heapType;
   switch (heapType)
   {
    default:
    case HeapType.MinHeap:
     _comparerFunc = (T t1, T t2) => _comparer.Compare(t1, t2) > 0;//目標對象t2小
     break;
    case HeapType.MaxHeap:
     _comparerFunc = (T t1, T t2) => _comparer.Compare(t1, t2) < 0;//目標對象t2大
     break;
   }
  }

  public T Dequeue()
  {
   if (_count == 0)
    throw new InvalidOperationException();
   T result = _array[0];
   _array[0] = _array[--_count];
   _array[_count] = default(T);

   if (_array.Length > _DefaultCapacity && _count * 100 <= _array.Length * _ShrinkThreshold)//縮容
   {
    int newCapacity = Math.Max(_DefaultCapacity, (int)((long)_array.Length * (long)_ShrinkThreshold / 100));
    SetCapacity(newCapacity);
   }
   AdjustHeap(_array, 0, _count);
   return result;
  }
  public void Enqueue(T item)
  {
   if (_count >= _array.Length)//擴容
   {
    int newCapacity = Math.Max(_array.Length+_MinimumGrow, (int)((long)_array.Length * (long)_GrowFactor / 100));
    SetCapacity(newCapacity);
   }

   _array[_count++] = item;
   int parentIndex;
   int targetIndex;
   int targetCount = _count;
   while (targetCount > 1)
   {
    parentIndex = targetCount / 2 - 1;
    targetIndex = targetCount - 1;
    if (!_comparerFunc.Invoke(_array[parentIndex], _array[targetIndex]))
     break;
    Swap(_array, parentIndex, targetIndex);
    targetCount = parentIndex + 1;
   }
  }
  private void AdjustHeap(T[] array, int parentIndex, int count)
  {
   if (_count < 2)
    return;
   int childLeftIndex = parentIndex * 2 + 1;
   int childRightIndex = (parentIndex + 1) * 2;

   int targetIndex = parentIndex;
   if (childLeftIndex < count && _comparerFunc.Invoke(array[parentIndex], array[childLeftIndex]))
    targetIndex = childLeftIndex;
   if (childRightIndex < count && _comparerFunc.Invoke(array[targetIndex], array[childRightIndex]))
    targetIndex = childRightIndex;
   if (targetIndex != parentIndex)
   {
    Swap(_array, parentIndex, targetIndex);
    AdjustHeap(_array, targetIndex, _count);
   }
  }

  private void SetCapacity(int capacity)
  {
   T[] newArray = new T[capacity];
   Array.Copy(_array, newArray, _count);
   _array = newArray;
  }

  private void Swap(T[] array, int index1, int index2)
  {
   T temp = array[index1];
   array[index1] = array[index2];
   array[index2] = temp;
  }

  public void Clear()
  {
   Array.Clear(_array, 0, _count);
   Init(_DefaultCapacity, HeapType.MinHeap, null);
  }
 }

 public enum HeapType { MinHeap, MaxHeap }

三、使用測試：　

　　建一個Person類用來測試，例子中Person比較規則是：先按年齡比較，年齡相同再按身高比較。具體比較大小是由選擇堆的類別進行不同的排序規則：如Person類中小根堆先按年齡小者排序，年齡相同者按身高大者排序；而使用大根堆則相反。兩種比較器寫法，前者直接使用默認比較器；后者需要將比較器注入到堆中。

public class Person : IComparable<Person>
 {
  public string name { get; set; }
  public int Age { get; set; }

  public int Height { get; set; }
  public override string ToString()
  {
   return $"我叫{name}，年齡{Age}，身高{Height}";
  }

  //小根堆：先排年齡小，年齡相同，按身高大的先排；大根堆相反
  public int CompareTo(Person other)
  {
   if (this.Age.CompareTo(other.Age) != 0)
    return this.Age.CompareTo(other.Age);
   else if (this.Height.CompareTo(other.Height) != 0)
    return ~this.Height.CompareTo(other.Height);
   else
    return 0;
  }
 }

 public class personComparer : IComparer<Person>
 {
  //大根堆：先排年齡大，年齡相同，按身高大的先排；小根堆相反
  public int Compare(Person x, Person y)
  {
   if (x.Age.CompareTo(y.Age) != 0)
    return x.Age.CompareTo(y.Age);
   else if (x.Height.CompareTo(y.Height) != 0)
    return x.Height.CompareTo(y.Height);
   else
    return 0;
  }
 }

　　主函數調用：

static void Main(string[] args)
  {
   int[] array = { 3, 5, 8, 3, 7, 1 };
   Heap<int> heap0 = new Heap<int>(array, HeapType.MaxHeap, null);
   Console.WriteLine(heap0.TypeName);
   Console.WriteLine(heap0.Dequeue());
   Console.WriteLine(heap0.Dequeue());
   Console.WriteLine(heap0.Dequeue());
   Console.WriteLine(heap0.Dequeue());
   int length = heap0.Count;
   for (int count = 0; count < length; count++)
   {
    Console.WriteLine(heap0.Dequeue());
   }

   Person person1 = new Person() { Age = 12, Height = 158, name = "張三" };
   Person person2 = new Person() { Age = 13, Height = 160, name = "李四" };
   Person person3 = new Person() { Age = 10, Height = 150, name = "王二" };
   Person person4 = new Person() { Age = 10, Height = 152, name = "麻子" };
   Person person5 = new Person() { Age = 12, Height = 150, name = "劉五" };
   List<Person> people = new List<Person>();
   people.Add(person1);
   people.Add(person2);
   people.Add(person3);
   people.Add(person4);
   people.Add(person5);
   Heap<Person> heap2 = new Heap<Person>(people, HeapType.MinHeap, null);
   Person person6 = new Person() { Age = 9, Height = 145, name = "趙六" };
   heap2.Enqueue(person6);
   Console.WriteLine(heap2.TypeName);
   Console.WriteLine(heap2.Dequeue());
   Console.WriteLine(heap2.Dequeue());
   Console.WriteLine(heap2.Dequeue());
   Console.WriteLine(heap2.Dequeue());

   PersonComparer personComparer = new PersonComparer();
   Heap<Person> heap3 = new Heap<Person>(1,HeapType.MaxHeap,personComparer);
   heap3.Enqueue(person1);
   heap3.Enqueue(person2);
   heap3.Enqueue(person3);
   heap3.Enqueue(person4);
   heap3.Enqueue(person5);
   heap3.Enqueue(person6);
   Console.WriteLine(heap3.TypeName);
   Console.WriteLine(heap3.Dequeue());
   Console.WriteLine(heap3.Dequeue());
   Console.WriteLine(heap3.Dequeue());
   Console.WriteLine(heap3.Dequeue());

   Console.ReadKey();
  }

　　輸出結果：

　　參考：

　　https://blog.csdn.net/qq826364410/article/details/79770791

　　https://docs.microsoft.com/zh-cn/dotnet/api/system.collections.generic.comparer-1?view=net-5.0

到此這篇關于使用C#實現數據結構堆的代碼的文章就介紹到這了,更多相關C#實現數據結構堆內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: