Python實現哲學家就餐問題實例代碼
哲學家就餐問題:
哲學家就餐問題是典型的同步問題,該問題描述的是五個哲學家共用一張圓桌,分別坐在五張椅子上,在圓桌上有五個盤子和五個叉子(如下圖),他們的生活方式是交替的進行思考和進餐,思考時不能用餐,用餐時不能思考。平時,一個哲學家進行思考,饑餓時便試圖用餐,只有在他同時拿到他的盤子左右兩邊的兩個叉子時才能進餐。進餐完畢后,他會放下叉子繼續思考。請寫出代碼來解決如上的哲學家就餐問題,要求代碼返回“當每個哲學家分別需要進食 n 次”時這五位哲學家具體的行為記錄。
測試用例:
輸入:n = 1 (1<=n<=60,n 表示每個哲學家需要進餐的次數。)
預期輸出:
[[4,2,1],[4,1,1],[0,1,1],[2,2,1],[2,1,1],[2,0,3],[2,1,2],[2,2,2],[4,0,3],[4,1,2],[0,2,1],[4,2,2],[3,2,1],[3,1,1],[0,0,3],[0,1,2],[0,2,2],[1,2,1],[1,1,1],[3,0,3],[3,1,2],[3,2,2],[1,0,3],[1,1,2],[1,2,2]]
思路:
輸出列表中的每一個子列表描述了某個哲學家的具體行為,它的格式如下:
output[i] = [a, b, c] (3 個整數)
a 哲學家編號。
b 指定叉子:{1 : 左邊, 2 : 右邊}.
c 指定行為:{1 : 拿起, 2 : 放下, 3 : 吃面}。
如 [4,2,1] 表示 4 號哲學家拿起了右邊的叉子。所有自列表組合起來,就完整描述了“當每個哲學家分別需要進食 n 次”時這五位哲學家具體的行為記錄。
代碼實現
import queue import threading import time import random class CountDownLatch: def __init__(self, count): self.count = count self.condition = threading.Condition() def wait(self): try: self.condition.acquire() while self.count > 0: self.condition.wait() finally: self.condition.release() def count_down(self): try: self.condition.acquire() self.count -= 1 self.condition.notifyAll() finally: self.condition.release() class DiningPhilosophers(threading.Thread): def __init__(self, philosopher_number, left_fork, right_fork, operate_queue, count_latch): super().__init__() self.philosopher_number = philosopher_number self.left_fork = left_fork self.right_fork = right_fork self.operate_queue = operate_queue self.count_latch = count_latch def eat(self): time.sleep(0.01) self.operate_queue.put([self.philosopher_number, 0, 3]) def think(self): time.sleep(random.random()) def pick_left_fork(self): self.operate_queue.put([self.philosopher_number, 1, 1]) def pick_right_fork(self): self.operate_queue.put([self.philosopher_number, 2, 1]) def put_left_fork(self): self.left_fork.release() self.operate_queue.put([self.philosopher_number, 1, 2]) def put_right_fork(self): self.right_fork.release() self.operate_queue.put([self.philosopher_number, 2, 2]) def run(self): while True: left = self.left_fork.acquire(blocking=False) right = self.right_fork.acquire(blocking=False) if left and right: self.pick_left_fork() self.pick_right_fork() self.eat() self.put_left_fork() self.put_right_fork() break elif left and not right: self.left_fork.release() elif right and not left: self.right_fork.release() else: time.sleep(0.01) print(str(self.philosopher_number) + ' count_down') self.count_latch.count_down() if __name__ == '__main__': operate_queue = queue.Queue() fork1 = threading.Lock() fork2 = threading.Lock() fork3 = threading.Lock() fork4 = threading.Lock() fork5 = threading.Lock() n = 1 latch = CountDownLatch(5 * n) for _ in range(n): philosopher0 = DiningPhilosophers(0, fork5, fork1, operate_queue, latch) philosopher0.start() philosopher1 = DiningPhilosophers(1, fork1, fork2, operate_queue, latch) philosopher1.start() philosopher2 = DiningPhilosophers(2, fork2, fork3, operate_queue, latch) philosopher2.start() philosopher3 = DiningPhilosophers(3, fork3, fork4, operate_queue, latch) philosopher3.start() philosopher4 = DiningPhilosophers(4, fork4, fork5, operate_queue, latch) philosopher4.start() latch.wait() queue_list = [] for i in range(5 * 5 * n): queue_list.append(operate_queue.get()) print(queue_list)
總結
到此這篇關于Python實現哲學家就餐問題的文章就介紹到這了,更多相關Python哲學家就餐內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!
相關文章
成功解決ValueError:?Supported?target?types?are:('binary
本文給大家分享成功解決ValueError:?Supported?target?types?are:('binary',?'multiclass').?Got?'continuous'?instead.的錯誤問題,需要的朋友可以參考下2023-03-03Python語言編寫電腦時間自動同步小工具
家里有臺很多年前買的電腦,CMOS電池殘廢了,經常遇到開機后系統時間被重置的情況2013-03-03python 實現將文件或文件夾用相對路徑打包為 tar.gz 文件的方法
今天小編就為大家分享一篇python 實現將文件或文件夾用相對路徑打包為 tar.gz 文件的方法,具有很好的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧2019-06-06使用Python對Dicom文件進行讀取與寫入的實現
這篇文章主要介紹了使用Python對Dicom文件進行讀取與寫入的實現,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2020-04-04pytorch建立mobilenetV3-ssd網絡并進行訓練與預測方式
這篇文章主要介紹了pytorch建立mobilenetV3-ssd網絡并進行訓練與預測方式,具有很好的參考價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教2023-02-02一文教你用Python中progress庫實現進度條
這篇文章主要為大家詳細介紹了如何通過Python中的progress庫實現進度條的繪制,文中的示例代碼講解詳細,感興趣的小伙伴可以跟隨小編一起學習一下2023-03-03