Centos下Oracle11gR2安裝教程與自動化配置腳本的方法

更新時間：2020年10月10日 10:45:27 作者：Hui_Tong

這篇文章主要介紹了Centos下Oracle11gR2安裝教程與自動化配置腳本的方法，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧

系統環境準備

開發組件與依賴庫安裝

安裝centos時選擇Server with GUI，右面的可以不勾選，后面統一來裝

配置本地yum源

以上包如果缺乏可配置本地yum源進行安裝

sudo mount /dev/cdrom /mnt/

[galen@localhost yum.repos.d]$ sudo vim /etc/yum.repos.d/cdrom.repo
[galen@localhost yum.repos.d]$ cat cdrom.repo 
[c7-media]
name=isofile
baseurl=file:///mnt
enable=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7

[galen@localhost yum.repos.d]$ sudo mv CentOS-Base.repo CentOS-Base.repo-bak
[galen@localhost yum.repos.d]$ sudo mv CentOS-Media.repo CentOS-Media.repo-bak
[galen@localhost yum.repos.d]$ sudo mv cdrom.repo CentOS-Media.repo

配置好yum源后開始安裝依賴庫，如下

yum install glibc glibc-devel glibc-headers ksh libaio libaio-devel libgcc libstdc++ libstdc++-devel make sysstat unixODBC unixODBC-devel pdksh compat-libcap1  compat-libstdc++ elfutils-libelf-devel gcc-c++

關閉防火墻

[galen@localhost ~]$ systemctl stop firewalld.service 
[galen@localhost ~]$ systemctl disable firewalld.service 
Removed symlink /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.

關閉selinux

編輯/etc/sysconfig/selinux文件，保存退出后執行 setenforce 0命令

vim /etc/sysconfig/selinux
SELINUX=disabled
#SELINUXTYPE=targeted  #注釋掉

創建oracle用戶、修改系統參數

創oracle建用戶和組

[root@localhost galen]# groupadd oinstall
[root@localhost galen]# groupadd dba
[root@localhost galen]# useradd -g oinstall -G dba oracle
[root@localhost galen]# passwd oracle

[root@localhost galen]# id oracle
uid=1001(oracle) gid=1001(oinstall) groups=1001(oinstall),1002(dba)

系統參數設置

官方推薦值：

fs.aio-max-nr = 1048576  
fs.file-max = 6815744  
kernel.shmall = 2097152 
kernel.shmmax = 536870912 #推薦超過一半的物理內存
kernel.shmmni = 4096  
kernel.sem = 250 32000 100 128  
net.ipv4.ip_local_port_range = 9000 65500  
net.core.rmem_default = 262144  
net.core.rmem_max = 4194304  
net.core.wmem_default = 262144 
net.core.wmem_max = 1048576

通過 /sbin/sysctl -a |grep xxx 查看系統各參數，如果大于官方推薦值不修改，如果小于官方推薦值則修改為官方推薦值，寫入/etc/sysctl.conf文件中，使用sysctl -p使其生效，示例如下

[root@localhost etc]# cat sysctl.conf
fs.aio-max-nr = 6815744
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048576

修改資源限制如下

[root@localhost etc]# vim /etc/security/limits.conf
oracle		soft		nproc		2048
oracle		hard		nproc		16384
oracle		soft		nofile		1024
oracle		hard		nofile		65536
oracle		soft		stack		10240

添加以下內容到/etc/pam.d/login

[root@localhost ~]# vim /etc/pam.d/login
session required  pam_limits.so

添加以下內容到/etc/profile

[root@localhost ~]# vim /etc/profile
if [[ $USER = "oracle" ]]; then
	if [[ $SHELL = "/bin/ksh" ]]; then
		ulimit -p 16384
		ulimit -n 65536
	else
		ulimit -u 16384 -n 65536
	fi
fi

保存后執行source /etc/profile生效

配置oracle用戶環境變量，在/home/oracle/.bash_profile中加入如下內容

[root@localhost ~]# vim /home/oracle/.bash_profile
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1
export ORACLE_SID=orcl
export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/OPatch:$ORACLE_HOME/jdk/bin:$PATH
export LANG="en_US.UTF-8"
export NLS_LANG=american_AMERICA.UTF8
export NLS_DATE_FORMAT="YYYY-MM-DD HH24:MI:SS"

創建oracle安裝目錄

mkdir -p /u01/app/oracle/product/11.2.0/db_1
chown -R oracle:oinstall /u01/app
chmod -R 775 /u01/app

安裝oracle 11g

掛載oracle11g安裝包iso（也可以通過其他方式將oracle安裝包傳到主機），將安裝文件復制到oracle home目錄下，修改文件權限給oracle用戶

[root@localhost /]# mkdir /mnt/oracle11g
[root@localhost /]# mount /dev/cdrom /mnt/oracle11g/
[root@localhost /]# cp -r /mnt/oracle11g /home/oracle/
# 復制到oracle home目錄下并修改權限
[root@localhost oracle]# chown -R oracle:oinstall /home/oracle/oracle11g/
[root@localhost oracle]# chmod -R 775 /home/oracle/oracle11g/

接下來使用oracle用戶登錄桌面

執行./runInstaller開始安裝，Centos 7安裝的時候錯誤彈框有時候會變成一條豎線，安裝無法進行下去，所以運行時執行

./runInstaller -jreLoc /etc/alternatives/jre_1.8.0

每項操作如下

[Configure Security Updates] 取消勾選 I wish to receive security updates via My Oracle Support，Next

[Installation Option] Install database software only，Next

[Grid Options] Next

[Product Languages] Next

[Enterprise Edition] Next

[Installation Location] Next

[Create Inventory] Next

[Operating System Groups] Next

[Prerequisite Checks] Next

[Summary] Finish，開始安裝oracle 11g

安裝到84%的時候可能會出現ins_ctx.mk相關的錯誤，如下

修改/u01/app/oracle/product/11.2.0/db_1/ctx/lib/ins_ctx.mk文件

# 源文件
ctxhx: $(CTXHXOBJ)
    $(LINK_CTXHX) $(CTXHXOBJ) $(INSO_LINK)
# 修改為
ctxhx: $(CTXHXOBJ)
    -static $(LINK_CTXHX) $(CTXHXOBJ) $(INSO_LINK) /usr/lib64/stdc.a

修改/u01/app/oracle/product/11.2.0/db_1/sysman/lib/ins_emagent.mk文件

# 源文件
$(SYSMANBIN)emdctl:
    $(MK_EMAGENT_NMECTL)
# 修改為
$(SYSMANBIN)emdctl:
    $(MK_EMAGENT_NMECTL) -lnnz11

retry繼續安裝到94%時，彈出

使用root用戶ssh到主機到上述目錄分別執行orainstRoot.sh與root.sh，執行root.sh時根據提示填入路徑

/u01/app/oracle/product/11.2.0/dbhome_1/bin，執行完成后到UI點擊OK，安裝完成

環境配置腳本

使用root用戶登錄
確保系統iso驅動器已連接（/dev/cdrom可mount）
復制腳本到主機并給予可執行權限，執行腳本完成后即可開始安裝oracle 11g

oracle 11g環境配置腳本

#!/bin/bash

# 配置yum源為本地iso
function set_yum_media() {
  cd /etc/yum.repos.d/
  for repo_file in `ls /etc/yum.repos.d/ | grep -v Media`
  do
    new_file=$repo_file.bak
    mv $repo_file $new_file
  done
  mkdir -p /mnt/media-dir
  mount /dev/cdrom /mnt/media-dir
  sed -i -e 's/baseurl=file:\/\/\/.*/baseurl=file:\/\/\/mnt\/media-dir\//g' -e 's/enabled=0/enabled=1/g' `ls /etc/yum.repos.d/ | grep Media`
  cd -
	rm -rf /var/run/yum.pid
  yum -y update
}

function install_packages() {
  for package in glibc glibc-devel glibc-headers ksh libaio libaio-devel libgcc libstdc++ libstdc++-devel make sysstat unixODBC unixODBC-devel pdksh compat-libcap1  compat-libstdc++ elfutils-libelf-devel gcc-c++
  do
    yum -y install $package
  done
}

function create_oracle_user() {
	groupadd oinstall
	groupadd dba
	useradd -g oinstall -G dba oracle
	# 設置oracle用戶密碼為oracle
	echo oracle|passwd --stdin oracle
}

function set_system_parm() {
	sed -i '$a\fs.aio-max-nr = 1048576' /etc/sysctl.conf
	sed -i '$a\fs.file-max = 6815744' /etc/sysctl.conf
	sed -i '$a\kernel.shmall = 2097152' /etc/sysctl.conf
	sed -i '$a\kernel.shmmax = 536870912' /etc/sysctl.conf
	sed -i '$a\kernel.shmmni = 4096' /etc/sysctl.conf
	sed -i '$a\kernel.sem = 250 32000 100 128' /etc/sysctl.conf
	sed -i '$a\net.ipv4.ip_local_port_range = 9000 65500' /etc/sysctl.conf
	sed -i '$a\net.core.rmem_default = 262144' /etc/sysctl.conf
	sed -i '$a\net.core.rmem_max = 4194304' /etc/sysctl.conf
	sed -i '$a\net.core.wmem_default = 262144' /etc/sysctl.conf
	sed -i '$a\net.core.wmem_max = 1048586' /etc/sysctl.conf
	sysctl -p
}

function set_system_limit_parm() {
	sed -i '$a\oracle		soft		nproc		2048' /etc/security/limits.conf
	sed -i '$a\oracle		hard		nproc		16384' /etc/security/limits.conf
	sed -i '$a\oracle		soft		nofile		1024' /etc/security/limits.conf
	sed -i '$a\oracle		hard		nofile		65536' /etc/security/limits.conf
	sed -i '$a\oracle		soft		stack		10240' /etc/security/limits.conf
}

function set_profile_parm() {
	sed -i '$a\session required  pam_limits.so' /etc/pam.d/login
	sed -i '$a\if [[ $USER = "oracle" ]]; then' /etc/profile
	sed -i '$a\  if [[ $SHELL = "/bin/ksh" ]]; then' /etc/profile
	sed -i '$a\    ulimit -p 16384' /etc/profile
	sed -i '$a\    ulimit -n 65536' /etc/profile
	sed -i '$a\  else' /etc/profile
	sed -i '$a\    ulimit -u 16384 -n 65536' /etc/profile
	sed -i '$a\  fi' /etc/profile
	sed -i '$a\fi' /etc/profile
	source /etc/profile
}

function set_oracle_env() {
	sed -i '$a\export ORACLE_BASE=/u01/app/oracle' /home/oracle/.bash_profile
	sed -i '$a\export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1' /home/oracle/.bash_profile
	sed -i '$a\export ORACLE_SID=orcl' /home/oracle/.bash_profile
	sed -i '$a\export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/OPatch:$ORACLE_HOME/jdk/bin:$PATH' /home/oracle/.bash_profile
	sed -i '$a\export LANG="en_US.UTF-8"' /home/oracle/.bash_profile
	sed -i '$a\export NLS_LANG=american_AMERICA.UTF8' /home/oracle/.bash_profile
	sed -i '$a\export NLS_DATE_FORMAT="YYYY-MM-DD HH24:MI:SS"' /home/oracle/.bash_profile
	source /home/oracle/.bash_profile
}

function create_oracle_dir() {
	mkdir -p /u01/app/oracle/product/11.2.0/db_1
	chown -R oracle:oinstall /u01/app
	chmod -R 775 /u01/app
}

function disable_firewall() {
	systemctl stop firewalld.service
	systemctl disable firewalld.service
	sed -i "s/SELINUX=enforcing/SELINUX=disabled/g" /etc/sysconfig/selinux
	setenforce 0
}

if [ `whoami` == "root" ]
then
	set_yum_media
	install_packages
	create_oracle_user
	echo "set system parm"
	set_system_parm
	echo "set limits"
	set_system_limit_parm
	echo "set /etc/profile"
	set_profile_parm
	echo "set oracle env"
	set_oracle_env
	echo "create oracle dir"
	create_oracle_dir
	echo "disable firwall"
	disable_firewall
fi

到此這篇關于Centos下Oracle11gR2安裝教程與自動化配置腳本的方法的文章就介紹到這了,更多相關Oracle11gR2安裝與自動化配置內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: