#先執行下面的命令安裝相關依賴，
#否則會出現`Missing recommended library`錯誤
sudo apt-get install freeglut3-dev build-essential libx11-dev libxmu-dev libxi-dev libgl1-mesa-glx libglu1-mesa libglu1-mesa-dev 


sudo sh cuda_8.0.61_375.26_linux.run #開始安裝

#..一堆協議說明...
#直接按q退出協議說明.
zerozone@zerozone: accept/decline/quit: accept #接受協議

Install NVIDIA Accelerated Graphics Driver for Linux-x86_64 375.26? 
y)es/(n)o/(q)uit: n #是否顯卡驅動包，由于已經安裝顯卡驅動，選擇n

Install the CUDA 8.0 Toolkit?
(y)es/(n)o/(q)uit: y #是否安裝工具包，選擇y

Enter Toolkit Location
[ default is /usr/local/cuda-8.0 ]: #工具包安裝地址，默認回車即可

Do you want to install a symbolic link at /usr/local/cuda?
(y)es/(n)o/(q)uit: y #添加鏈接**注意這個連接，如果你之前安裝過另一個版本的cuda，除非你確定想要用這個新版本的cuda，否則這里就建議選no，因為指定該鏈接后會將cuda指向這個新的版本**

Install the CUDA 8.0 Samples?
(y)es/(n)o/(q)uit: y #安裝樣例

Enter CUDA Samples Location
 [ default is /root ]: #樣例安裝地址默認即可

# ***安裝信息***
Installing the CUDA Toolkit in /usr/local/cuda-8.0 ...

Missing recommended library: libXi.so
Missing recommended library: libXmu.so
#注意，這里出現了Missing recommended library錯誤，
#是因為博主在第一次安裝時，沒有添加最開始的那條安裝相關依賴的指令，
#之后我添加了依賴后，再次安裝，就沒有Missing錯誤了

Installing the CUDA Samples in /root ...
Copying samples to /root/NVIDIA_CUDA-8.0_Samples now...
Finished copying samples.

===========
= Summary =
===========
Driver:  Not Selected
Toolkit: Installed in /usr/local/cuda-8.0
Samples: Installed in /root, but missing recommended libraries

Please make sure that
 -  PATH includes /usr/local/cuda-8.0/bin
 -  LD_LIBRARY_PATH includes /usr/local/cuda-8.0/lib64, or, add /usr/local/cuda-8.0/lib64 to /etc/ld.so.conf and run ldconfig as root

To uninstall the CUDA Toolkit, run the uninstall script in /usr/local/cuda-8.0/bin

Please see CUDA_Installation_Guide_Linux.pdf in /usr/local/cuda-8.0/doc/pdf for detailed information on setting up CUDA.

***WARNING: Incomplete installation! This installation did not install the CUDA Driver. A driver of version at least 361.00 is required for CUDA 8.0 functionality to work.

To install the driver using this installer, run the following command, replacing <CudaInstaller> with the name of this run file:

  sudo <CudaInstaller>.run -silent -driver

Logfile is /tmp/cuda_install_6388.log  
# ***安裝完成***

Tensorflow官方安裝歷程要求注意的是:配置PATH和LD_LIBRARY_PATH和CUDA_HOME環境變量.

vim ~/.bashrc #修改配置文件（如果你用的是zsh，則需要修改 ~/.zshrc文件）

#在文件結尾處添加
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/cuda/lib64
export PATH=$PATH:/usr/local/cuda/bin
export CUDA_HOME=$CUDA_HOME:/usr/local/cuda

sudo rm -rf cuda
sudo ln -s /usr/local/cuda-9.1 /usr/local/cuda