SpringBoot應用啟動流程源碼解析
前言
Springboot應用在啟動的時候分為兩步:首先生成 SpringApplication 對象 ,運行 SpringApplication 的 run 方法,下面一一看一下每一步具體都干了什么
public static ConfigurableApplicationContext run(Class<?>[] primarySources, String[] args) {
return new SpringApplication(primarySources).run(args);
}
創建 SpringApplication 對象
public SpringApplication(ResourceLoader resourceLoader, Class<?>... primarySources) {
this.resourceLoader = resourceLoader;
Assert.notNull(primarySources, "PrimarySources must not be null");
//保存主配置類
this.primarySources = new LinkedHashSet<>(Arrays.asList(primarySources));
//判斷當前是否一個web應用
this.webApplicationType = WebApplicationType.deduceFromClasspath();
//從類路徑下找到META-INF/spring.factories配置的所有ApplicationContextInitializer;然后保存起來
setInitializers((Collection) getSpringFactoriesInstances(ApplicationContextInitializer.class));
//從類路徑下找到ETA-INF/spring.factories配置的所有ApplicationListener
setListeners((Collection) getSpringFactoriesInstances(ApplicationListener.class));
//從多個配置類中找到有main方法的主配置類
this.mainApplicationClass = deduceMainApplicationClass();
}
其中從類路徑下獲取到META-INF/spring.factories配置的所有ApplicationContextInitializer和ApplicationListener的具體代碼如下
public final class SpringFactoriesLoader {
/**spring.factories的位置*/
public static final String FACTORIES_RESOURCE_LOCATION = "META-INF/spring.factories";
private static final Log logger = LogFactory.getLog(SpringFactoriesLoader.class);
/**
* 緩存掃描后的結果, 注意這個cache是static修飾的,說明是多個實例共享的
* 其中MultiValueMap的key就是spring.factories中的key(比如org.springframework.boot.autoconfigure.EnableAutoConfiguration),
* 其值就是key對應的value以逗號分隔后得到的List集合(這里用到了MultiValueMap,他是guava的一鍵多值map, 類似Map<String, List<String>>)
*/
private static final Map<ClassLoader, MultiValueMap<String, String>> cache = new ConcurrentReferenceHashMap<>();
private SpringFactoriesLoader() {
}
/**
* AutoConfigurationImportSelector及應用的初始化器和監聽器里最終調用的就是這個方法,
* 這里的factoryType是EnableAutoConfiguration.class、ApplicationContextInitializer.class、或ApplicationListener.class
* classLoader是AutoConfigurationImportSelector、ApplicationContextInitializer、或ApplicationListener里的beanClassLoader
*/
public static List<String> loadFactoryNames(Class<?> factoryType, @Nullable ClassLoader classLoader) {
String factoryTypeName = factoryType.getName();
return loadSpringFactories(classLoader).getOrDefault(factoryTypeName, Collections.emptyList());
}
/**
* 加載 spring.factories文件的核心實現
*/
private static Map<String, List<String>> loadSpringFactories(@Nullable ClassLoader classLoader) {
// 先從緩存獲取,如果獲取到了說明之前已經被加載過
MultiValueMap<String, String> result = cache.get(classLoader);
if (result != null) {
return result;
}
try {
// 找到所有jar中的spring.factories文件的地址
Enumeration<URL> urls = (classLoader != null ?
classLoader.getResources(FACTORIES_RESOURCE_LOCATION) :
ClassLoader.getSystemResources(FACTORIES_RESOURCE_LOCATION));
result = new LinkedMultiValueMap<>();
// 循環處理每一個spring.factories文件
while (urls.hasMoreElements()) {
URL url = urls.nextElement();
UrlResource resource = new UrlResource(url);
// 加載spring.factories文件中的內容到Properties對象中
Properties properties = PropertiesLoaderUtils.loadProperties(resource);
// 遍歷spring.factories內容中的所有的鍵值對
for (Map.Entry<?, ?> entry : properties.entrySet()) {
// 獲得spring.factories內容中的key(比如org.springframework.boot.autoconfigure.EnableAutoConfiguratio)
String factoryTypeName = ((String) entry.getKey()).trim();
// 獲取value, 然后按英文逗號(,)分割得到value數組并遍歷
for (String factoryImplementationName : StringUtils.commaDelimitedListToStringArray((String) entry.getValue())) {
// 存儲結果到上面的多值Map中(MultiValueMap<String, String>)
result.add(factoryTypeName, factoryImplementationName.trim());
}
}
}
cache.put(classLoader, result);
return result;
}
catch (IOException ex) {
throw new IllegalArgumentException("Unable to load factories from location [" +
FACTORIES_RESOURCE_LOCATION + "]", ex);
}
}
}
運行run方法
public ConfigurableApplicationContext run(String... args) {
//開始停止的監聽
StopWatch stopWatch = new StopWatch();
stopWatch.start();
//聲明一個可配置的ioc容器
ConfigurableApplicationContext context = null;
FailureAnalyzers analyzers = null;
//配置awt相關的東西
configureHeadlessProperty();
//獲取SpringApplicationRunListeners;從類路徑下META-INF/spring.factories
SpringApplicationRunListeners listeners = getRunListeners(args);
//回調所有的獲取SpringApplicationRunListener.starting()方法
listeners.starting();
try {
//封裝命令行參數
ApplicationArguments applicationArguments = new DefaultApplicationArguments(
args);
//準備環境
ConfigurableEnvironment environment = prepareEnvironment(listeners,
applicationArguments);
//創建環境完成后回調SpringApplicationRunListener.environmentPrepared();表示環境準備完成
Banner printedBanner = printBanner(environment);
//創建ApplicationContext;決定創建web的ioc還是普通的ioc,
//通過反射創建ioc容器((ConfigurableApplicationContext) BeanUtils.instantiateClass(contextClass);)
context = createApplicationContext();
//出現異常之后做異常分析報告
analyzers = new FailureAnalyzers(context);
//準備上下文環境;將environment保存到ioc中;而且applyInitializers();
//applyInitializers():回調之前保存的所有的ApplicationContextInitializer的initialize方法
//回調所有的SpringApplicationRunListener的contextPrepared();
//
prepareContext(context, environment, listeners, applicationArguments,
printedBanner);
//prepareContext運行完成以后回調所有的SpringApplicationRunListener的contextLoaded();
//刷新容器;ioc容器初始化(如果是web應用還會創建嵌入式的Tomcat);Spring注解版
//掃描,創建,加載所有組件的地方;(配置類,組件,自動配置)
refreshContext(context);
//從ioc容器中獲取所有的ApplicationRunner和CommandLineRunner進行回調
//ApplicationRunner先回調,CommandLineRunner再回調
afterRefresh(context, applicationArguments);
//所有的SpringApplicationRunListener回調finished方法
listeners.finished(context, null);
stopWatch.stop();
if (this.logStartupInfo) {
new StartupInfoLogger(this.mainApplicationClass)
.logStarted(getApplicationLog(), stopWatch);
}
//整個SpringBoot應用啟動完成以后返回啟動的ioc容器;
return context;
}
catch (Throwable ex) {
handleRunFailure(context, listeners, analyzers, ex);
throw new IllegalStateException(ex);
}
}
幾個重要的事件回調機制
配置在META-INF/spring.factories
ApplicationContextInitializer
SpringApplicationRunListener
只需要放在ioc容器中
ApplicationRunner
CommandLineRunner
以上就是本文的全部內容,希望對大家的學習有所幫助,也希望大家多多支持腳本之家。
相關文章
mybatis抽取基類BaseMapper增刪改查的實現
目前項目當中使用mapper.xml文件方式對數據庫進行操作,但是每個里邊都有增/刪/改/查,為了方便開發,把這些公共的代碼提取出來,不用當做基類,不用每個Mapper文件都寫了,本文就詳細的介紹一下實現方法2021-09-09

