C++ Strassen算法代碼的實現
本文僅代碼,無理論解釋
實話實說,我覺得這個算法在C系列的語言下,簡直垃圾到爆炸……畢竟是一群完全不懂程序數學家對著紙弄出來的,看起來好像非常的有用,實際上耗時是非常爆炸的。
但是《算法導論》里有啊……然后上課又要求手寫一個
于是我就手寫了一個……我盡可能的減少使用的空間同時加快速度了,當 n = 512 的時候,內存使用量峰值沒有超過 10mb,而且是通過遞歸實現 Strassen 算法
其中,in.txt 已經預先準備了 3000000 個范圍在 0-100 隨機數,避免程序在運算過程中爆 int(雖然完全可以取1000)
/**
* Created by Mauve on 3/29/2020.
* Copyright © 2020 Mauve, All Rights Reserved
*/
#include <bits/stdc++.h>
using namespace std;
/**
* 矩陣相乘
* 最終結果耗時結果保存至
* https://www.desmos.com/calculator/gl4tm5i1zu
*/
struct mat {
unsigned row, col;
mat(unsigned r, unsigned c) : row(r), col(c) {}
virtual int &pos_ref(unsigned i, unsigned j) = 0;
virtual int pos(unsigned i, unsigned j) const = 0;
};
struct base_mat;
struct sub_mat;
stack<sub_mat *> sub_data;
struct base_mat : mat {
int *data;
base_mat(unsigned r, unsigned c) : mat(r, c), data(new int[row * col]) {}
~base_mat() {
delete[] data;
}
inline int &pos_ref(unsigned i, unsigned j) override {
return *(data + i * col + j);
}
inline int pos(unsigned i, unsigned j) const override {
return *(data + i * col + j);
}
};
unsigned min_mul;
struct sub_mat : mat {
mat *a, *b;
bool is_add;
unsigned offset_ai, offset_aj, offset_bi, offset_bj;
explicit sub_mat(mat *data) : mat(data->row, data->col), a(data), b(nullptr),
is_add(false), offset_ai(0), offset_aj(0),
offset_bi(0), offset_bj(0) { sub_data.push(this); }
sub_mat(mat *data, bool of_i, bool of_j) : mat(data->row >> 1u, data->col >> 1u), a(data), b(nullptr),
is_add(false), offset_ai(of_i ? data->row >> 1u : 0),
offset_aj(of_j ? data->col >> 1u : 0),
offset_bi(0), offset_bj(0) { sub_data.push(this); }
inline int &pos_ref(unsigned i, unsigned j) override {
assert(b == nullptr);
return a->pos_ref(i + offset_ai, j + offset_aj);
}
inline int pos(unsigned i, unsigned j) const override {
if (b == nullptr)
return a->pos(i + offset_ai, j + offset_aj);
return a->pos(i + offset_ai, j + offset_aj) + (is_add ? 1 : -1) * b->pos(i + offset_bi, j + offset_bj);
}
inline sub_mat *operator+(sub_mat &other) {
auto res = new sub_mat(this);
res->b = &other;
res->is_add = true;
return res;
}
inline sub_mat *operator-(sub_mat &other) {
auto res = new sub_mat(this);
res->b = &other;
res->is_add = false;
return res;
}
mat *operator*(sub_mat &other) {
assert(col == other.row);
auto res = new base_mat(row, other.col);
if (col & 1u || row & 1u || col <= min_mul || row <= min_mul || other.col <= min_mul) {
memset(res->data, 0, sizeof(int) * res->row * res->col);
for (int k = 0; k < col; k++)
for (int i = 0; i < row; ++i)
for (int j = 0; j < other.col; ++j)
res->pos_ref(i, j) += pos(i, k) * other.pos(k, j);
} else {
size_t sub_data_size = sub_data.size();
#define a(i, j) (*new sub_mat(this, i == 2 , j == 2))
#define b(i, j) (*new sub_mat(&other, i == 2 , j == 2))
auto m1 = *(a(1, 1) + a(2, 2)) * *(b(1, 1) + b (2, 2));
auto m2 = *(a(2, 1) + a(2, 2)) * b(1, 1);
auto m3 = a(1, 1) * *(b(1, 2) - b(2, 2));
auto m4 = a(2, 2) * *(b(2, 1) - b(1, 1));
auto m5 = *(a(1, 1) + a(1, 2)) * b(2, 2);
auto m6 = *(a(2, 1) - a(1, 1)) * *(b(1, 1) + b(1, 2));
auto m7 = *(a(1, 2) - a(2, 2)) * *(b(2, 1) + b(2, 2));
#undef a
#undef b
unsigned half_row = row >> 1u, half_col = col >> 1u;
#define m(t) (m##t->pos(i, j))
// C11
for (unsigned i = 0; i < half_row; ++i)
for (unsigned j = 0; j < half_col; ++j)
res->pos_ref(i, j) = m(1) + m(4) - m(5) + m(7);
// C12
for (unsigned i = 0; i < half_row; ++i)
for (unsigned j = 0; j < half_col; ++j)
res->pos_ref(i, j + half_col) = m(3) + m(5);
// C21
for (unsigned i = 0; i < half_row; ++i)
for (unsigned j = 0; j < half_col; ++j)
res->pos_ref(i + half_row, j) = m(2) + m(4);
// C22
for (unsigned i = 0; i < half_row; ++i)
for (unsigned j = 0; j < half_col; ++j)
res->pos_ref(i + half_row, j + half_col) = m(1) - m(2) + m(3) + m(6);
#undef m
delete dynamic_cast<base_mat *>(m1);
delete dynamic_cast<base_mat *>(m2);
delete dynamic_cast<base_mat *>(m3);
delete dynamic_cast<base_mat *>(m4);
delete dynamic_cast<base_mat *>(m5);
delete dynamic_cast<base_mat *>(m6);
delete dynamic_cast<base_mat *>(m7);
while (sub_data.size() > sub_data_size) {
delete sub_data.top();
sub_data.pop();
}
}
return res;
}
};
unsigned N = 2;
void solve() {
cerr << "N = " << N << endl;
base_mat a(N, N), b(N, N);
for (int i = 0; i < N; ++i)
for (int j = 0; j < N; ++j)
cin >> a.pos_ref(i, j);
for (int i = 0; i < N; ++i)
for (int j = 0; j < N; ++j)
cin >> b.pos_ref(i, j);
for (int t = 1; t < min(10u, N); t += 3) {
auto x = new sub_mat(&a), y = new sub_mat(&b);
min_mul = t;
auto time_1 = clock();
auto z = *x * *y;
auto time_2 = clock();
cerr << "t = " << t << " time: " << double(time_2 - time_1) / CLOCKS_PER_SEC << endl;
delete dynamic_cast<base_mat *>(z);
while (!sub_data.empty()) {
delete sub_data.top();
sub_data.pop();
}
}
auto x = new sub_mat(&a), y = new sub_mat(&b);
min_mul = 10000;
auto time_1 = clock();
auto z = *x * *y;
auto time_2 = clock();
cerr << "tradition: " << double(time_2 - time_1) / CLOCKS_PER_SEC << endl;
delete dynamic_cast<base_mat *>(z);
while (!sub_data.empty()) {
delete sub_data.top();
sub_data.pop();
}
N *= 2;
if (N >= 1000) exit(0);
}
signed main() {
ios_base::sync_with_stdio(false);
cin.tie(nullptr);
cout.tie(nullptr);
#ifdef ACM_LOCAL
freopen("in.txt", "r", stdin);
freopen("out.txt", "w", stdout);
long long test_index_for_debug = 1;
char acm_local_for_debug;
while (cin >> acm_local_for_debug && acm_local_for_debug != '~') {
cin.putback(acm_local_for_debug);
if (test_index_for_debug > 20) {
throw runtime_error("Check the stdin!!!");
}
auto start_clock_for_debug = clock();
solve();
auto end_clock_for_debug = clock();
cout << "Test " << test_index_for_debug << " successful" << endl;
cerr << "Test " << test_index_for_debug++ << " Run Time: "
<< double(end_clock_for_debug - start_clock_for_debug) / CLOCKS_PER_SEC << "s" << endl;
cout << "--------------------------------------------------" << endl;
}
#else
solve();
#endif
return 0;
}
到此這篇關于C++ Strassen算法代碼的實現的文章就介紹到這了,更多相關C++ Strassen算法 內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!
相關文章
C語言實現刮刮樂效果是示例代碼
這篇文章主要為大家詳細介紹了如何C語言模擬實現刮刮樂的效果,只要按下鼠標左鍵并移動就可以刮開刮卡層,感興趣的小伙伴可以跟隨小編一起學習一下2023-01-01
C語言開發實現貪吃蛇游戲
這篇文章主要為大家詳細介紹了C語言開發實現貪吃蛇游戲,文中示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下2020-07-07
C++實現LeetCode(7.翻轉整數)
這篇文章主要介紹了C++實現LeetCode(7.翻轉整數),本篇文章通過簡要的案例,講解了該項技術的了解與使用,以下就是詳細內容,需要的朋友可以參考下2021-07-07
C語言手撕一個Hash表(HashTable)實例代碼
哈希表(HashTable)是一種非常重要的數據結構,它可以在常量時間內進行插入、查找和刪除操作,下面這篇文章主要給大家介紹了關于C語言手撕一個Hash表(HashTable)的相關資料,需要的朋友可以參考下2023-03-03
使用C語言的fork()函數在Linux中創建進程的實例講解
這篇文章主要介紹了使用C語言的fork()函數在Linux中創建進程的實例講解,fork在父進程下創建出的子進程可以與父進程一起來多進程運行同一個程序,需要的朋友可以參考下2016-06-06

