快捷導航

C語言實現停車場管理系統

更新時間：2019年11月27日 11:45:05 作者：黑夜不見湖面

這篇文章主要為大家詳細介紹了C語言實現停車場管理系統，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下

問題描述：停車場是一個能放n輛車的狹長通道，只有一個大門，汽車按到達的先后次序停放。若車場滿了，車要停在門外的便道上等候，一旦有車走，則便道上第一輛車進入。當停車場中的車離開時，由于通道窄，在它后面呢的車要先退出，待它走后再依次進入。汽車離開時按停放時間收費。

基本功能要求：

（1）建立三個數據結構分別是：停放隊列、讓路棧、等候隊列。
（2）輸入數據模擬管理過程，數據（入或出，車號）。

停車管理系統是C語言中隊列和棧比較簡單的應用，需要注意的是停車隊列、等候隊列、讓路棧結構體的構建。在寫代碼時，出隊列入棧和出棧入隊列時，指針容易出錯而造成段錯誤，應當注意。我所寫的代碼如下：

//定義結構體

#include <stdio.h>
#include <stdlib.h>

#define F 0
#define T 1
#define MAX 3

typedef struct Node //數據
{
 int number;
 int time;
}Node;

typedef struct QueueNode //隊列結點
{
 struct Node infom;
 struct QueueNode * next;
}*QueueNode;

typedef struct LinkQueue //鏈隊列
{
 struct QueueNode * front;
 struct QueueNode * rear;
}LinkQueue;

typedef struct stack   //棧結點
{
 struct Node data;
 struct stack *next;
}*StackNode;

typedef struct LinkStack  //鏈棧
{
 StackNode top;
 int count;
}LinkStack;

//函數實現

void menu(LinkQueue *wait,LinkQueue *park,LinkStack *giveway,int num,int t);//菜單
int init(LinkQueue *wait,LinkQueue *park,LinkStack *giveway);//初始化
int linklength(LinkQueue q);//查看長度
int enqueue(LinkQueue *q,int num,int t);//入隊列
int dequeue(LinkQueue *q,int *num,int *t);//出隊列
void park1(LinkQueue *wait,LinkQueue *park);//停車函數
int push(LinkStack *s,int num,int t);//入棧
int pop(LinkStack *s,int *num,int *t);//出棧
void leave2(LinkQueue *wait,LinkQueue *park,LinkStack *giveway,int num,int t);//離開函數
void view3(LinkQueue wait,LinkQueue park);//查看停車場狀態

int main()
{
 LinkQueue wait;
 LinkQueue park;
 LinkStack giveway;
 int num = 0;
 int t = 0;
 init(&wait,&park,&giveway);
 menu(&wait,&park,&giveway,num,t);
 return 0;
}

int init(LinkQueue *wait,LinkQueue *park,LinkStack *giveway)
{
 QueueNode newnode1 = (QueueNode)malloc(sizeof(struct QueueNode));
 if(NULL == newnode1)
 {
  return F;
 }
 newnode1->next = NULL;
 wait->front = newnode1;
 wait->rear = newnode1;

 QueueNode newnode2 = (QueueNode)malloc(sizeof(struct QueueNode));
 if(NULL == newnode2)
 {
  return F;
 }
 newnode2->next = NULL;
 park->front = newnode2;
 park->rear = newnode2;

 giveway->top = NULL;
 giveway->count = 0;
}

void menu(LinkQueue *wait,LinkQueue *park,LinkStack *giveway,int num,int t)
{
 printf("**********Welcome to our Car Parking !**********\n");
 printf("********** Please choose function **********\n");
 printf("**********   1 : park.   **********\n");
 printf("**********   2 : leave.   **********\n");
 printf("**********   3 : view.   **********\n");
 printf("**********   4 : exit.   **********\n");
 int option;
 scanf("%d",&option);
 switch(option)
 {
  case 1:{
   park1(wait,park);
   printf("停車完成！\n");
   menu(wait,park,giveway,num,t);
   break;
  }
  case 2:{
   leave2(wait,park,giveway,num,t);
   menu(wait,park,giveway,num,t);
   break;
  }
  case 3:{
   view3(*wait,*park);
   menu(wait,park,giveway,num,t);
   break;
  }
  case 4:{
   printf("**********  歡迎再次使用，謝謝！ **********\n");
   break;
  }
  default:{
   printf("**********  請輸入正確的指令！ **********\n");
   menu(wait,park,giveway,num,t);
   break;
  }
 }

}

int linklength(LinkQueue q)
{
 int i = 0;
 while(q.front != q.rear)
 {
  i++;
  q.front = q.front->next;
 }
 return i;
}

int enqueue(LinkQueue *q,int num,int t)
{
 QueueNode newnode = (QueueNode)malloc(sizeof(struct QueueNode));
 if(NULL == newnode)
 {
  return F;
 }
 newnode->infom.number = num;
 newnode->infom.time = t;
 newnode->next = NULL;
 q->rear->next = newnode;
 q->rear = newnode;
 return T;
}

int dequeue(LinkQueue *q,int *num,int *t)
{
 if(q->front == q->rear)
 {
  printf("the queue is empty!\n");
  return F;
 }
 *num = q->front->next->infom.number;
 *t = q->front->next->infom.time;
 QueueNode temp = q->front->next;
 q->front->next = temp->next;
 if(temp->next == NULL)
 {
  q->rear = q->front;
 }
 free(temp);
 return T;
}

void park1(LinkQueue *wait,LinkQueue *park)
{
 printf("請輸入車號和停車時間\n");
 int num,t;
 scanf("%d,%d",&num,&t);
 if(linklength(*park) >= MAX)
 {
  printf("停車場已滿，進入等待區！\n");
  enqueue(wait,num,t);
 }
 else
 {
  enqueue(park,num,t);
 }
}

int push(LinkStack *s,int num,int t)
{
 StackNode newnode = (StackNode)malloc(sizeof(struct stack));
 if(NULL == newnode)
 {
  return F;
 }
 newnode->data.number = num;
 newnode->data.time = t;
 newnode->next = s->top;
 s->top = newnode;
 s->count++;
 return T;
}

int pop(LinkStack *s,int *num,int *t)
{
 if(0 == s->count)
 {
  printf("the stack is empty !\n");
  return F;
 }
 *num = s->top->data.number;
 *t = s->top->data.time;
 StackNode temp = s->top;
 s->top = s->top->next;
 free(temp);
 s->count--;
 return T;
}

void leave2(LinkQueue *wait,LinkQueue *park,LinkStack *giveway,int num,int t)
{
 printf("請輸入要離開車的車號\n");
 int leavenumber;
 scanf("%d",&leavenumber);
 int i = 0;
 QueueNode head = park->front;
 while(head != park->rear)
 {
  if(head->next->infom.number != leavenumber)
  {
   head = head->next;
   i++;
  }
  else
   break;
 }
 int j = 0;
 if(i <= MAX-1)
 {
  while(j != i)
  {
   dequeue(park,&num,&t);
   push(giveway,num,t);
   j++;
  }
  dequeue(park,&num,&t);
 }
 else
 {
  printf("查無此車！\n");
 }
 while(giveway->top != NULL)
 {
  pop(giveway,&num,&t);
  enqueue(park,num,t);
 }
 if(linklength(*wait) != 0)
 {
  dequeue(wait,&num,&t);
  enqueue(park,num,t);
 }
}

void view3(LinkQueue wait,LinkQueue park)
{
 printf("******************** 目前停車場狀況 ********************\n");
 printf("停車場共%d個車位，當前停車場共有%d量車，等待區共有%d量車\n",
  MAX,linklength(park),linklength(wait));
 printf("**************************************************************\n");
 printf("車 號：");
 QueueNode head1 = park.front;
 QueueNode head2 = park.front;
 while(head1 != park.rear)
 {
  printf("%d ",head1->next->infom.number);
  head1 = head1->next;
 }
 printf("\n");
 printf("停車時間：");
 while(head2 != park.rear)
 {
  printf("%d ",head2->next->infom.time);
  head2 = head2->next;
 }
 printf("\n");
}

更多學習資料請關注專題《管理系統開發》。

以上就是本文的全部?jī)?nèi)容，希望對大家的學習有所幫助，也希望大家多多支持腳本之家。

您可能感興趣的文章: