php不用GD庫生成當前時間的PNG格式圖象的程序第2/2頁
更新時間:2008年09月28日 14:40:24 作者:
該程序是不用GD庫可以生成當前時間的PNG格式圖象,給人大開眼界,很有參考價值. teaman整理
$date = getdate();
$s = $date["seconds"];
$m = $date["minutes"];
$h = $date["hours"];
$digits = array(95, 5, 118, 117, 45, 121, 123, 69, 127, 125);
$lines = array(1, 1, 1, 2, 0, 1, 0, 2, 1, 0, 1, 1, 0, 0, 0, 1, 0, 2, 1, 2, 0, 1, 1, 1, 0, 0, 1, 0);
draw2digits(4, 2, $h);
draw2digits(30, 2, $m);
draw2digits(56, 2, $s);
set_4pixel(0, 0, 0, 26, 7);
set_4pixel(0, 0, 0, 26, 13);
set_4pixel(0, 0, 0, 52, 7);
set_4pixel(0, 0, 0, 52, 13);
// 創建循環冗余碼校驗表
$z = -306674912; // = 0xedb88320
for ($n = 0; $n < 256; $n++) {
$c = $n;
for ($k = 0; $k < 8; $k++) {
$c2 = ($c >> 1) & 0x7fffffff;
if ($c & 1) $c = $z ^ ($c2); else $c = $c2;
}
$crc_table[$n] = $c;
}
// PNG file signature
$result = pack("c*", 137,80,78,71,13,10,26,10);
// IHDR chunk data:
// width: 4 bytes
// height: 4 bytes
// bit depth: 1 byte (8 bits per RGB value)
// color type: 1 byte (2 = RGB)
// compression method: 1 byte (0 = deflate/inflate)
// filter method: 1 byte (0 = adaptive filtering)
// interlace method: 1 byte (0 = no interlace)
$data = pack("c*", ($sx >> 24) & 255,
($sx >> 16) & 255,
($sx >> 8) & 255,
$sx & 255,
($sy >> 24) & 255,
($sy >> 16) & 255,
($sy >> 8) & 255,
$sy & 255,
8,
2,
0,
0,
0);
add_chunk("IHDR");
// 以下不敢亂翻譯,請自行參考
// scanline:
// filter byte: 0 = none
// RGB bytes for the line
// the scanline is compressed with "zlib", method 8 (RFC-1950):
// compression method/flags code: 1 byte ($78 = method 8, 32k window)
// additional flags/check bits: 1 byte ($01: FCHECK = 1, FDICT = 0, FLEVEL = 0)
// compressed data blocks: n bytes
// one block (RFC-1951):
// bit 0: BFINAL: 1 for the last block
// bit 1 and 2: BTYPE: 0 for no compression
// next 2 bytes: LEN (LSB first)
// next 2 bytes: one's complement of LEN
// LEN bytes uncompressed data
// check value: 4 bytes (Adler-32 checksum of the uncompressed data)
//
$len = ($sx * 3 + 1) * $sy;
$data = pack("c*", 0x78, 0x01,
1,
$len & 255,
($len >> 8) & 255,
255 - ($len & 255),
255 - (($len >> 8) & 255));
$start = strlen($data);
$i2 = 0;
for ($h = 0; $h < $sy; $h++) {
$data .= chr(0);
for ($w = 0; $w < $sx * 3; $w++) {
$data .= $pixels[$i2++];
}
}
// calculate a Adler32 checksum with the bytes data[start..len-1]
$s1 = 1;
$s2 = 0;
for ($n = $start; $n < strlen($data); $n++) {
$s1 = ($s1 + ord($data[$n])) % 65521;
$s2 = ($s2 + $s1) % 65521;
}
$adler = ($s2 << 16) | $s1;
$data .= chr(($adler >> 24) & 255);
$data .= chr(($adler >> 16) & 255);
$data .= chr(($adler >> 8) & 255);
$data .= chr($adler & 255);
add_chunk("IDAT");
// IEND: marks the end of the PNG-file
$data = "";
add_chunk("IEND");
// 列印圖象
echo($result);
?>
//如何調用,其實很簡單,將上面存為Timeimg.php
//然后新建一個頁面如下:
<html>
<head>
<title>test</title>
<meta http-equiv="Content-Type" content="text/html">
</head>
<body>
<img src="Timeimg.php"> //以圖象連接方式調用PHP文件
</body>
</html>
相關文章
php實現對兩個數組進行減法操作的方法
這篇文章主要介紹了php實現對兩個數組進行減法操作的方法,涉及php操作數組的相關技巧,具有一定參考借鑒價值,需要的朋友可以參考下2015-04-04PHP實現多維數組多字段自定義排序
這篇文章主要介紹了PHP實現多維數組多字段自定義排序,通過將待排序數組的各個數組的$field保存在一維數組fieldArr中,在傳入array_multisort中參與排序,相當于對$field一維數組的排序,而后根據排序后的key重新構建傳入的待排序數組,需要的朋友可以參考下2023-10-10PHP讀取TXT文本內容的五種實用方法小結
PHP作為一種流行的服務器端腳本語言,提供了多種方法來讀取TXT文本內容,本文主要為大家詳細介紹五種不同的PHP方法,希望對大家有所幫助2024-01-01php和C#的yield迭代器實現方法對比分析
這篇文章主要介紹了php和C#的yield迭代器實現方法,簡單說明了yield迭代器的原理,并結合具體實例形式對比分析了php和C#的yield迭代器相關使用技巧,需要的朋友可以參考下2019-07-07