快捷導航

C語言實現電子時鐘程序

更新時間：2022年03月31日 16:11:28 作者：Yan_Less

這篇文章主要為大家詳細介紹了C語言實現電子時鐘程序，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下

本文實例為大家分享了C語言實現電子時鐘程序的具體代碼，供大家參考，具體內容如下

Qt 里面運行

#include<windows.h> 
#include <stdio.h> 
#include <stdlib.h> 
#include <conio.h> 
#include <time.h> 
typedef struct
{
  int x;
  int y;
}Point;
time_t now;
struct tm *pt, t1, t2;
int printpoint(Point p)
{
  Point p1;
  p1.x = p.x + 2; p1.y = p.y + 4;
  gotoxy(p1.x, p1.y);   printf("%c%c", 2, 2);
  gotoxy(p1.x, p1.y + 1);  printf("%c%c", 2, 2);
  p1.y += 4;
  gotoxy(p1.x, p1.y);   printf("%c%c", 2, 2);
  gotoxy(p1.x, p1.y + 1);  printf("%c%c", 2, 2);
  return 0;
}
int print0(Point p)
{
  int i = 0;
  for (; i<13; i++)
  {
    gotoxy(p.x + 1, p.y + i);
    if (i == 0 || i == 12)
      printf("%c%c%c%c%c%c", 2, 2, 2, 2, 2, 2);
    else
      printf("%c%4s%c", 2, " ", 2);
  }
  return 0;
}
int print1(Point p)
{
  int i = 0;
  for (; i<13; i++)
  {
    gotoxy(p.x + 1, p.y + i);
    printf("%5s%c", " ", 2);
  }
  return 0;
}
int print2(Point p)
{
  int i = 0;
  for (; i<13; i++)
  {
    gotoxy(p.x + 1, p.y + i);
    if (i == 0 || i == 6 || i == 12)
      printf("%c%c%c%c%c%c", 2, 2, 2, 2, 2, 2);
    else if (i>0 && i<6)
      printf("%5s%c", " ", 2);
    else
      printf("%c", 2);
  }
  return 0;
}
int print3(Point p)
{
  int i = 0;
  for (; i<13; i++)
  {
    gotoxy(p.x + 1, p.y + i);
    if (i == 0 || i == 6 || i == 12)
      printf("%c%c%c%c%c%c", 2, 2, 2, 2, 2, 2);
    else
      printf("%5s%c", " ", 2);
  }
  return 0;
}
int print4(Point p)
{
  int i = 0;
  for (; i<13; i++)
  {
    gotoxy(p.x + 1, p.y + i);
    if (i<6) printf("%c%4s%c", 2, " ", 2);
    else if (i == 6)
      printf("%c%c%c%c%c%c", 2, 2, 2, 2, 2, 2);
    else printf("%5s%c", " ", 2);
  }
  return 0;
}
int print5(Point p)
{
  int i = 0;
  for (; i<13; i++)
  {
    gotoxy(p.x + 1, p.y + i);
    if (i == 0 || i == 6 || i == 12)
      printf("%c%c%c%c%c%c", 2, 2, 2, 2, 2, 2);
    else if (i>0 && i<6)
      printf("%c", 2);
    else
      printf("%5s%c", " ", 2);
  }
  return 0;
}
int print6(Point p)
{
  int i = 0;
  for (; i<13; i++)
  {
    gotoxy(p.x + 1, p.y + i);
    if (i == 0 || i == 6 || i == 12)
      printf("%c%c%c%c%c%c", 2, 2, 2, 2, 2, 2);
    else if (i>0 && i<6)
      printf("%c", 2);
    else
      printf("%c%4s%c", 2, " ", 2);
  }
  return 0;
}
int print7(Point p)
{
  int i = 0;
  for (; i<13; i++)
  {
    gotoxy(p.x + 1, p.y + i);
    if (i == 0)  printf("%c%c%c%c%c%c", 2, 2, 2, 2, 2, 2);
    else    printf("%5s%c", " ", 2);
  }
  return 0;
}
int print8(Point p)
{
  int i = 0;
  for (; i<13; i++)
  {
    gotoxy(p.x + 1, p.y + i);
    if (i == 0 || i == 6 || i == 12)
      printf("%c%c%c%c%c%c", 2, 2, 2, 2, 2, 2);
    else printf("%c%4s%c", 2, " ", 2);
  }
  return 0;
}
int print9(Point p)
{
  int i = 0;
  for (; i<13; i++)
  {
    gotoxy(p.x + 1, p.y + i);
    if (i == 0 || i == 6 || i == 12)
      printf("%c%c%c%c%c%c", 2, 2, 2, 2, 2, 2);
    else if (i>0 && i<6)
      printf("%c%4s%c", 2, " ", 2);
    else
      printf("%5s%c", " ", 2);
  }
  return 0;
}
int clear(Point p)
{
  int i = 0;
  for (; i<13; i++)
    gotoxy(p.x, p.y + i); printf("%16s", " ");
  return 0;
}
int printtime(Point p, int n)
{
  int a, b;
  Point pp;
  a = n / 10, b = n % 10;
  pp.x = p.x + 8, pp.y = p.y;
  switch (a)
  {
  case 0: print0(p); break;
  case 1: print1(p); break;
  case 2: print2(p); break;
  case 3: print3(p); break;
  case 4: print4(p); break;
  case 5: print5(p); break;
  }
  switch (b)
  {
  case 0: print0(pp); break;
  case 1: print1(pp); break;
  case 2: print2(pp); break;
  case 3: print3(pp); break;
  case 4: print4(pp); break;
  case 5: print5(pp); break;
  case 6: print6(pp); break;
  case 7: print7(pp); break;
  case 8: print8(pp); break;
  case 9: print9(pp); break;
  }
  return 0;
}
int main()
{
  Point phour, pmin, psec, point1, point2;
  phour.x = 9, pmin.x = 32, psec.x = 55;
  phour.y = pmin.y = psec.y = 7;
  point1.x = 25, point2.x = 49;
  point1.y = point2.y = 7;
  clrscr();
  textbackground(YELLOW);     /* 設置背景顏色*/
  textcolor(RED);   /* 設置數字顯示顏色*/
  now = time(0);
  pt = localtime(&now);
  t1 = *pt;
  printtime(phour, t1.tm_hour);
  printpoint(point1);
  printtime(pmin, t1.tm_min);
  printpoint(point2);
  printtime(psec, t1.tm_sec);
  while (1)
  {
    now = time(0);
    pt = localtime(&now);
    t2 = *pt;
    if (t2.tm_sec != t1.tm_sec)
    {
      t1 = t2;
      clrscr();
      printtime(phour, t1.tm_hour);
      printpoint(point1);
      printtime(pmin, t1.tm_min);
      printpoint(point2);
      printtime(psec, t1.tm_sec);
    }
    if (bioskey(1) == 0) continue;
    else exit(0);
  }
  return 0;
}

以上就是本文的全部內容，希望對大家的學習有所幫助，也希望大家多多支持腳本之家。

您可能感興趣的文章: