亚洲乱码中文字幕综合,中国熟女仑乱hd,亚洲精品乱拍国产一区二区三区,一本大道卡一卡二卡三乱码全集资源,又粗又黄又硬又爽的免费视频

Linux系統下快速配置HugePages的完整步驟

 更新時間:2018年11月15日 09:37:52   作者:AlfredZhao  
這篇文章主要給大家介紹了關于如何在Linux系統下快速配置HugePages的完整步驟,文中通過圖文介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧

前言

關于Linux系統的HugePages與Oracle數據庫優化,可以參考熊爺之前的文章,相關概念介紹的非常清晰:

Linux大內存頁Oracle數據庫優化

本文旨在Linux系統上快速配置HugePages

測試環境:RHEL6.8 + 512G物理內存;Oracle 11.2.0.4 SGA=400G.

1.設置memlock無限制

在/etc/security/limits.conf配置文件中,設置oracle用戶memlock無限制:

vi /etc/security/limits.conf

oracle soft memlock unlimited
oracle hard memlock unlimited

2.設置合理的vm.nr_hugepages

在/etc/sysctl.conf配置文件中,設置合理的vm.nr_hugepages值。

運行MOS 401749.1提供的hugepages_settings.sh腳本,直接可以得到建議值。

hugepages_settings.sh腳本內容:

#!/bin/bash
#
# hugepages_settings.sh
#
# Linux bash script to compute values for the
# recommended HugePages/HugeTLB configuration
# on Oracle Linux
#
# Note: This script does calculation for all shared memory
# segments available when the script is run, no matter it
# is an Oracle RDBMS shared memory segment or not.
#
# This script is provided by Doc ID 401749.1 from My Oracle Support 
# http://support.oracle.com

# Welcome text
echo "
This script is provided by Doc ID 401749.1 from My Oracle Support 
(http://support.oracle.com) where it is intended to compute values for 
the recommended HugePages/HugeTLB configuration for the current shared 
memory segments on Oracle Linux. Before proceeding with the execution please note following:
* For ASM instance, it needs to configure ASMM instead of AMM.
* The 'pga_aggregate_target' is outside the SGA and 
you should accommodate this while calculating SGA size.
* In case you changes the DB SGA size, 
as the new SGA will not fit in the previous HugePages configuration, 
it had better disable the whole HugePages, 
start the DB with new SGA size and run the script again.
And make sure that:
* Oracle Database instance(s) are up and running
* Oracle Database 11g Automatic Memory Management (AMM) is not setup 
(See Doc ID 749851.1)
* The shared memory segments can be listed by command:
# ipcs -m


Press Enter to proceed..."

read

# Check for the kernel version
KERN=`uname -r | awk -F. '{ printf("%d.%d\n",$1,$2); }'`

# Find out the HugePage size
HPG_SZ=`grep Hugepagesize /proc/meminfo | awk '{print $2}'`
if [ -z "$HPG_SZ" ];then
echo "The hugepages may not be supported in the system where the script is being executed."
exit 1
fi

# Initialize the counter
NUM_PG=0

# Cumulative number of pages required to handle the running shared memory segments
for SEG_BYTES in `ipcs -m | cut -c44-300 | awk '{print $1}' | grep "[0-9][0-9]*"`
do
MIN_PG=`echo "$SEG_BYTES/($HPG_SZ*1024)" | bc -q`
if [ $MIN_PG -gt 0 ]; then
NUM_PG=`echo "$NUM_PG+$MIN_PG+1" | bc -q`
fi
done

RES_BYTES=`echo "$NUM_PG * $HPG_SZ * 1024" | bc -q`

# An SGA less than 100MB does not make sense
# Bail out if that is the case
if [ $RES_BYTES -lt 100000000 ]; then
echo "***********"
echo "** ERROR **"
echo "***********"
echo "Sorry! There are not enough total of shared memory segments allocated for 
HugePages configuration. HugePages can only be used for shared memory segments 
that you can list by command:

# ipcs -m

of a size that can match an Oracle Database SGA. Please make sure that:
* Oracle Database instance is up and running 
* Oracle Database 11g Automatic Memory Management (AMM) is not configured"
exit 1
fi

# Finish with results
case $KERN in
'2.2') echo "Kernel version $KERN is not supported. Exiting." ;;
'2.4') HUGETLB_POOL=`echo "$NUM_PG*$HPG_SZ/1024" | bc -q`;
echo "Recommended setting: vm.hugetlb_pool = $HUGETLB_POOL" ;;
'2.6') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
'3.8') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
'3.10') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
'4.1') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
esac

# End

直接運行腳本即可得到對應的建議:

--當啟動的實例設置SGA_MAX_SIZE=12G,給出建議:
Recommended setting: vm.nr_hugepages = 6148

--當啟動的實例設置SGA_MAX_SIZE=400G,給出建議:
Recommended setting: vm.nr_hugepages = 204805

--當沒有啟動實例時,會報錯提示:
***********
** ERROR **
***********
Sorry! There are not enough total of shared memory segments allocated for 
HugePages configuration. HugePages can only be used for shared memory segments 
that you can list by command:

# ipcs -m

of a size that can match an Oracle Database SGA. Please make sure that:
* Oracle Database instance is up and running 
* Oracle Database 11g Automatic Memory Management (AMM) is not configured

我這里將建議值vm.nr_hugepages = 204805追加到/etc/sysctl.conf配置文件中,然后執行sysctl -p生效配置。

3.確認HugePages設置成功

查看關于HugePages的信息,注意HugePages_Total值是之前設置的204805:

grep Huge /proc/meminfo

# grep Huge /proc/meminfo 
AnonHugePages: 0 kB
HugePages_Total: 204805
HugePages_Free: 168475
HugePages_Rsvd: 168471
HugePages_Surp: 0
Hugepagesize: 2048 kB

數據庫在啟動時,對應alert日志中會有“Large Pages Information”內容:

Wed Nov 14 14:38:12 2018
Starting ORACLE instance (normal)
************************ Large Pages Information *******************
Per process system memlock (soft) limit = UNLIMITED

Total Shared Global Region in Large Pages = 400 GB (100%)

Large Pages used by this instance: 204801 (400 GB)
Large Pages unused system wide = 4 (8192 KB)
Large Pages configured system wide = 204805 (400 GB)
Large Page size = 2048 KB
********************************************************************

至此可以確認HugePages設置成功。

總結

以上就是這篇文章的全部內容了,希望本文的內容對大家的學習或者工作具有一定的參考學習價值,如果有疑問大家可以留言交流,謝謝大家對腳本之家的支持。

相關文章

  • Centos安裝MYSQL8.X的教程

    Centos安裝MYSQL8.X的教程

    這篇文章主要介紹了Centos安裝MYSQL8.X的教程,本文以CentOS版本為7.6,安裝的MySQL版本為8.0.17,感興趣的朋友跟隨小編一起看看吧
    2019-10-10
  • Linux命令行上如何使用日歷詳解

    Linux命令行上如何使用日歷詳解

    這篇文章主要給大家介紹了Linux命令行上如何使用日歷的相關資料,文中通過示例代碼介紹的非常詳細,對大家學習或者使用linux具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧。
    2018-04-04
  • 在linux下開啟FTP服務方法介紹

    在linux下開啟FTP服務方法介紹

    這篇文章主要介紹了在linux下開啟FTP服務方法介紹,具有一定參考價值,需要的朋友可以了解下。
    2017-11-11
  • 詳解SSH 遠程執行任務的方法

    詳解SSH 遠程執行任務的方法

    本篇文章主要介紹了詳解SSH 遠程執行任務的方法,小編覺得挺不錯的,現在分享給大家,也給大家做個參考。一起跟隨小編過來看看吧
    2017-12-12
  • htaccess 將所有請求重定向到某個URL地址的規則

    htaccess 將所有請求重定向到某個URL地址的規則

    htaccess 將所有請求重定向到某個URL地址的規則,需要的朋友可以參考下。
    2011-04-04
  • Linux中配置DNS正向解析

    Linux中配置DNS正向解析

    本文介紹了如何配置DNS正向解析,包括編輯named.conf文件、abc.zone文件和啟動服務,配置中需注意文件格式和權限設置,實驗通過配置DNS服務器實現域名到IP的解析,這對網絡管理和維護非常重要,關閉防火墻和設置SELinux為disabled是實驗的基礎環境配置,通過實驗
    2024-09-09
  • Ubuntu安裝PHP和PHP Nginx配置方法

    Ubuntu安裝PHP和PHP Nginx配置方法

    本篇文章主要介紹了Ubuntu安裝PHP和PHP Nginx配置方法,具有一定的參考價值,有興趣的可以了解一下
    2017-08-08
  • CentOS6.5下Tomcat7 Nginx Redis配置步驟教程詳解

    CentOS6.5下Tomcat7 Nginx Redis配置步驟教程詳解

    這篇文章主要介紹了CentOS6.5下Tomcat7 Nginx Redis配置步驟,本文給大家介紹的非常詳細,具有參考借鑒價值,需要的朋友可以參考下
    2016-10-10
  • Apache常用虛擬主機配置方法解析

    Apache常用虛擬主機配置方法解析

    這篇文章主要介紹了Apache常用虛擬主機配置方法解析,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下
    2020-11-11
  • Linux VPS/服務器上輕松導入、導出MySQL數據庫的幾種方法

    Linux VPS/服務器上輕松導入、導出MySQL數據庫的幾種方法

    隨著網站的運行MySQL數據庫也越來越大,備份問題也日益凸顯,使用phpmyadmin導出或?qū)霑r可能會因為超時文件過大等原因無法導入或?qū)С觥?/div> 2010-12-12

最新評論