Android仿新版微信浮窗效果
閱讀公眾號或其他文章,經常需要暫時退出文章.
在新版微信中,可以把瀏覽的文章縮小為浮窗.點擊浮窗繼續閱讀.對于經常在微信里閱讀的人來說,這簡直就是人類之光.
微信效果如下
微信效果
對于這功能我進行了仿寫.
效果如下
仿寫效果
微信的大佬一定用了了不起的技術,我這里只是實現效果.
簡單寫了一個庫,一句代碼即可實現效果
//在AppDelegate中將類名傳入即可 [HKFloatManager addFloatVcs:@[@"HKSecondViewController"]];
使用到的技術點
監聽側滑返回
//設置邊緣側滑代理 self.navigationController.interactivePopGestureRecognizer.delegate = self; //當開始側滑pop時調用此方法 - (BOOL)gestureRecognizerShouldBegin:(UIGestureRecognizer *)gestureRecognizer{ /* 判斷是否開啟邊緣側滑返回 **/ if (self.navigationController.viewControllers.count > 1) { [self beginScreenEdgePanBack:gestureRecognizer]; return YES; } return NO; } /* UIScreenEdgePanGestureRecognizer @property(nullable, nonatomic, readonly) UIGestureRecognizer *interactivePopGestureRecognizer NS_AVAILABLE_IOS(7_0) __TVOS_PROHIBITED; /*! This subclass of UIPanGestureRecognizer only recognizes if the user slides their finger in from the bezel on the specified edge. */ //NS_CLASS_AVAILABLE_IOS(7_0) __TVOS_PROHIBITED @interface UIScreenEdgePanGestureRecognizer : UIPanGestureRecognizer **/ //利用CADisplayLink 來實現監聽返回手勢 - (void)beginScreenEdgePanBack:(UIGestureRecognizer *)gestureRecognizer{ /* * 引用 gestureRecognizer * 開啟 CADisplayLink * 顯示右下視圖 **/ self.edgePan = (UIScreenEdgePanGestureRecognizer *)gestureRecognizer; _link = [CADisplayLink displayLinkWithTarget:self selector:@selector(panBack:)]; [self.link addToRunLoop:[NSRunLoop mainRunLoop] forMode:NSRunLoopCommonModes]; [[UIApplication sharedApplication].keyWindow addSubview:self.floatArea]; } //此方法中進行操作 - (void)panBack:(CADisplayLink *)link { //判斷手勢狀態 if (self.edgePan.state == UIGestureRecognizerStateChanged) {//移動過程 /* * 改變右下視圖 frame * 判斷手指是否進入右下視圖中 **/ //手指在屏幕上的位置 CGPoint tPoint = [self.edgePan translationInView:kWindow]; ...根據tPoint設置右下視圖 frame... //手指在右下視圖上的位置(若 x>0 && y>0 說明此時手指在右下視圖上) CGPoint touchPoint = [kWindow convertPoint:[self.edgePan locationInView:kWindow] toView:self.floatArea]; if (touchPoint.x > 0 && touchPoint.y > 0) { ... //由于右下視圖是1/4圓 所以需要這步判斷 if (pow((kFloatAreaR - touchPoint.x), 2) + pow((kFloatAreaR - touchPoint.y), 2) <= pow((kFloatAreaR), 2)) { self.showFloatBall = YES; } ... }else if (self.edgePan.state == UIGestureRecognizerStatePossible) { /* * 停止CADisplayLink * 隱藏右下視圖 * 顯示/隱藏浮窗 **/ [self.link invalidate]; if (self.showFloatBall) { self.floatBall.iconImageView.image= [self.floatViewController valueForKey:@"hk_iconImage"]; [kWindow addSubview:self.floatBall]; } } }
監聽浮窗移動/點擊
#import "HKFloatBall.h" 類為浮窗視圖類 //點擊浮窗后讓代理push之前保留起來的控制器 - (void)tap:(UIGestureRecognizer *)tap{ if ([self.delegate respondsToSelector:@selector(floatBallDidClick:)]) { [self.delegate floatBallDidClick:self]; } } - (void)touchesCancelled:(NSSet *)touches withEvent:(UIEvent *)event{ ...結束監聽... } - (void)touchesEnded:(NSSet *)touches withEvent:(UIEvent *)event{ ...結束監聽... } - (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event{ /* * 改變浮窗 frame * 改變右下視圖 frame * 判斷浮窗center 是否在右下視圖之上 **/ CGPoint center_ball = [kWindow convertPoint:self.floatBall.center toView:self.cancelFloatArea]; if (pow((kFloatAreaR - center_ball.x), 2) + pow((kFloatAreaR - center_ball.y), 2) <= pow((kFloatAreaR), 2)) { if (!self.cancelFloatArea.highlight) { self.cancelFloatArea.highlight = YES; } } } }
自定義push/pop動畫
//設置navigationController代理 self.navigationController.delegate = self; #pragma UINavigationControllerDelegate //push/pop 時會調用此代理方法 - (nullable id )navigationController:(UINavigationController *)navigationController animationControllerForOperation:(UINavigationControllerOperation)operation fromViewController:(UIViewController *)fromVC toViewController:(UIViewController *)toVC{ ... 判斷是否執行動畫 若 return nil 則執行原始 push/pop 動畫... //HKTransitionPush HKTransitionPop 是自己寫的兩個動畫類,需要實現 if(operation==UINavigationControllerOperationPush) { return [[HKTransitionPush alloc]init]; } else if(operation==UINavigationControllerOperationPop){ return [[HKTransitionPop alloc]init]; } } HKTransitionPush HKTransitionPop 代碼類似已HKTransitionPush為例 #import "HKTransitionPush.h" -(NSTimeInterval)transitionDuration:(id)transitionContext{ return kAuration;//動畫時間 } - (void)animateTransition:(id)transitionContext { //獲取上下文 self.transitionContext = transitionContext; UIViewController * fromVC = [transitionContext viewControllerForKey:UITransitionContextFromViewControllerKey]; UIViewController *toVC = [transitionContext viewControllerForKey:UITransitionContextToViewControllerKey]; UIView *contView = [transitionContext containerView]; [contView addSubview:fromVC.view]; [contView addSubview:toVC.view]; //添加遮罩視圖 [fromVC.view addSubview:self.coverView]; //浮窗的 frame push時這個是起始 frame ,pop時是結束時的 frame CGRect floatBallRect = [HKFloatManager shared].floatBall.frame; //開始/結束時的曲線 UIBezierPath *maskStartBP = [UIBezierPath bezierPathWithRoundedRect:CGRectMake(floatBallRect.origin.x, floatBallRect.origin.y,floatBallRect.size.width , floatBallRect.size.height) cornerRadius:floatBallRect.size.height/2]; UIBezierPath *maskFinalBP = [UIBezierPath bezierPathWithRoundedRect:CGRectMake(0, 0,SCREEN_WIDTH, SCREEN_HEIGHT) cornerRadius:floatBallRect.size.width/2]; //.layer.mask 是部分顯示的原因 CAShapeLayer *maskLayer = [CAShapeLayer layer]; maskLayer.path = maskFinalBP.CGPath; toVC.view.layer.mask = maskLayer; //動畫類 CABasicAnimation *maskLayerAnimation = [CABasicAnimation animationWithKeyPath:@"path"]; maskLayerAnimation.fromValue = (__bridge id)(maskStartBP.CGPath); maskLayerAnimation.toValue = (__bridge id)((maskFinalBP.CGPath)); maskLayerAnimation.duration = kAuration; maskLayerAnimation.timingFunction = [CAMediaTimingFunction functionWithName:kCAMediaTimingFunctionEaseInEaseOut]; maskLayerAnimation.delegate = self; [maskLayer addAnimation:maskLayerAnimation forKey:@"path"]; //隱藏浮窗 [UIView animateWithDuration:kAuration animations:^{ [HKFloatManager shared].floatBall.alpha = 0; }]; } #pragma mark - CABasicAnimation的Delegate //動畫完成后代理 - (void)animationDidStop:(CAAnimation *)anim finished:(BOOL)flag{ [self.transitionContext completeTransition:YES]; [self.transitionContext viewControllerForKey:UITransitionContextFromViewControllerKey].view.layer.mask = nil; [self.transitionContext viewControllerForKey:UITransitionContextToViewControllerKey].view.layer.mask = nil; [self.coverView removeFromSuperview]; } -(UIView *)coverView{ if (!_coverView) { _coverView = [[UIView alloc]initWithFrame:[UIScreen mainScreen].bounds]; _coverView.backgroundColor = [UIColor blackColor]; _coverView.alpha = 0.5; }; return _coverView; }
解耦
將所有代碼集中在 #import "HKFloatManager.h" 中
//在AppDelegate中將類名傳入即可,在該類控制器側滑返回時啟動浮窗功能(需要在實例化導航控制器之后) [HKFloatManager addFloatVcs:@[@"HKSecondViewController"]];
若需要設置浮窗頭像,設置該控制器的"hk_iconImage"
@property (nonatomic, strong) UIImage *hk_iconImage; Tips
震動反饋
UIImpactFeedbackGenerator*impactLight = [[UIImpactFeedbackGenerator alloc]initWithStyle:UIImpactFeedbackStyleMedium]; [impactLight impactOccurred]; // UIImpactFeedbackStyleLight, // UIImpactFeedbackStyleMedium, // UIImpactFeedbackStyleHeavy
分類獲取當前控制器
#import "NSObject+hkvc.h" @implementation NSObject (hkvc) - (UIViewController *)hk_currentViewController { UIWindow *keyWindow = [UIApplication sharedApplication].keyWindow; UIViewController *vc = keyWindow.rootViewController; if ([vc isKindOfClass:[UINavigationController class]]) { vc = [(UINavigationController *)vc visibleViewController]; } else if ([vc isKindOfClass:[UITabBarController class]]) { vc = [(UITabBarController *)vc selectedViewController]; } return vc; } - (UINavigationController *)hk_currentNavigationController { return [self hk_currentViewController].navigationController; } - (UITabBarController *)hk_currentTabBarController { return [self hk_currentViewController].tabBarController; } @end
判斷控制器是否有"hk_iconImage"屬性
- (BOOL)haveIconImage{ BOOL have = NO; unsigned int outCount = 0; Ivar *ivars = class_copyIvarList([self.floatViewController class], &outCount); for (unsigned int i = 0; i < outCount; i ++) { Ivar ivar = ivars[i]; const char * nameChar = ivar_getName(ivar); NSString *nameStr =[NSString stringWithFormat:@"%s",nameChar]; if([nameStr isEqualToString:@"_hk_iconImage"]) { have = YES; } } free(ivars); return have; }
以上便是實現該效果的全部實現.上方含有部分偽代碼.全部代碼已上傳至---Github--- 歡迎(跪求) Star.
以上所述是小編給大家介紹的Android仿新版微信浮窗效果,希望對大家有所幫助,如果大家有任何疑問請給我留言,小編會及時回復大家的。在此也非常感謝大家對腳本之家網站的支持!
相關文章
詳解Android 通過Socket 和服務器通訊(附demo)
Android 通過Socket 和服務器通訊,是一種比較常用的通訊方式,這篇文章主要介紹了詳解Android 通過Socket 和服務器通訊,有興趣的可以了解一下。2016-12-12Android實現Gesture手勢識別用法分析
這篇文章主要介紹了Android實現Gesture手勢識別用法,結合實例形式較為詳細的分析了Android基于Gesture實現手勢識別的原理與具體實現技巧,需要的朋友可以參考下2016-09-09Android中AsyncTask異步任務使用詳細實例(一)
AsyncTask是Android提供的輕量級的異步類,可以直接繼承AsyncTask,在類中實現異步操作,并提供接口反饋當前異步執行的程度(可以通過接口實現UI進度更新),最后反饋執行的結果給UI主線程,通過本文給大家介紹Android中AsyncTask異步任務使用詳細實例(一),需要的朋友參考下2016-02-02flutter?material?widget組件之信息展示組件使用詳解
這篇文章主要為大家詳細介紹了flutter?material?widget組件之信息展示組件的使用,文中示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下2022-08-08Android自定義view實現水波紋進度球效果
在我們的日常開發中自定義控件還是用的挺多的,設計師或者產品為了更好的漂亮,美觀,交互都會做一些牛逼的ui效果圖,但是最后實現的還是我們程序員啊。所以說 自定義view你還是得會的。2016-08-08Android LinearLayout實現自動換行
這篇文章主要為大家詳細介紹了Android LinearLayout實現自動換行,文中示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下2018-08-08Android onTouchEvent事件中onTouch方法返回值(介紹)
下面小編就為大家?guī)硪黄狝ndroid onTouchEvent事件中onTouch方法返回值(介紹)。小編覺得挺不錯的,現在就分享給大家,也給大家做個參考。一起跟隨小編過來看看吧2017-04-04Android實現讓圖片在屏幕上任意移動的方法(拖拽功能)
這篇文章主要介紹了Android實現讓圖片在屏幕上任意移動的方法,實例分析了Android拖拽功能的相關實現技巧,需要的朋友可以參考下2016-08-08