iOS獲取短信驗證碼倒計時的兩種實現方法
方法一:
網上用的很多的一種,不多說,直接上代碼.
-(void)startTime{ __block int timeout= 60; //倒計時時間 dispatch_queue_t queue = dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_DEFAULT, 0); dispatch_source_t _timer = dispatch_source_create(DISPATCH_SOURCE_TYPE_TIMER, 0, 0,queue); dispatch_source_set_timer(_timer,dispatch_walltime(NULL, 0),1.0*NSEC_PER_SEC, 0); //每秒執行 dispatch_source_set_event_handler(_timer, ^{ if(timeout<=0){ //倒計時結束,關閉 dispatch_source_cancel(_timer); dispatch_async(dispatch_get_main_queue(), ^{ [self.getIdentifyCodeBt setTitle:@"獲取驗證碼" forState:UIControlStateNormal]; self.getIdentifyCodeBt.userInteractionEnabled = YES; [self.getIdentifyCodeBt setTitleColor:THEME_RED forState:UIControlStateNormal]; self.getIdentifyCodeBt.backgroundColor = [UIColor whiteColor]; self.getIdentifyCodeBt.layer.borderColor = THEME_RED.CGColor; }); }else{ dispatch_async(dispatch_get_main_queue(), ^{ [UIView beginAnimations:nil context:nil]; [UIView setAnimationDuration:1]; [self.getIdentifyCodeBt setTitle:[NSString stringWithFormat:@"%zd秒后失效",timeout] forState:UIControlStateNormal]; [self.getIdentifyCodeBt setTitleColor:[UIColor whiteColor] forState:UIControlStateNormal]; self.getIdentifyCodeBt.backgroundColor = [UIColor lightGrayColor]; self.getIdentifyCodeBt.layer.borderColor = [UIColor clearColor].CGColor; self.getIdentifyCodeBt.clipsToBounds = YES; [UIView commitAnimations]; self.getIdentifyCodeBt.userInteractionEnabled = NO; }); timeout--; } }); dispatch_resume(_timer); }
到時直接調用就可以了。
方法二:利用分類
給UIButton新建一個分類
.h文件如下
#import <UIKit/UIKit.h> @interface UIButton (XSCountDown) - (void)xs_beginCountDownWithDuration:(NSTimeInterval)duration; - (void)xs_stopCountDown; @end
.m文件如下
#import "UIButton+XSCountDown.h" #import "ThemeColor.h" static NSTimer *_countTimer; static NSTimeInterval _count; static NSString *_title; @implementation UIButton (XSCountDown) - (void)xs_beginCountDownWithDuration:(NSTimeInterval)duration { _title = self.titleLabel.text; _count = duration; _countTimer = [NSTimer scheduledTimerWithTimeInterval:1.0 target:self selector:@selector(xs_updateTitle) userInfo:nil repeats:YES]; [[NSRunLoop mainRunLoop] addTimer:_countTimer forMode:NSRunLoopCommonModes]; self.userInteractionEnabled = NO; [self setTitleColor:[UIColor whiteColor] forState:UIControlStateNormal]; self.backgroundColor = [UIColor lightGrayColor]; self.layer.borderColor = [UIColor clearColor].CGColor; self.clipsToBounds = YES; } - (void)xs_stopCountDown { [_countTimer invalidate]; _countTimer = nil; _count = 60.0; [self setTitle:_title forState:UIControlStateNormal]; self.userInteractionEnabled = YES; } - (void)xs_updateTitle { NSString *countString = [NSString stringWithFormat:@"%lis 后失效", (long)_count - 1]; self.userInteractionEnabled = NO; [self setTitle:countString forState:UIControlStateNormal]; if (_count-- <= 1.0) { [self xs_stopCountDown]; [self setTitleColor:THEME_RED forState:UIControlStateNormal]; self.backgroundColor = [UIColor whiteColor]; self.layer.borderColor = THEME_RED.CGColor; } } @end
然后在controller里直接調用分類.h文件里的方法就ok了
[self.verifyBt xs_beginCountDownWithDuration:60.0];
以上就是本文的全部?jī)?nèi)容,希望對大家的學習有所幫助,也希望大家多多支持腳本之家。
- IOS開發代碼分享之用nstimer實現倒計時功能
- IOS實現驗證碼倒計時功能(一)
- IOS關于大型網站搶購、距活動結束,剩余時間倒計時的實現代碼
- ios 實現倒計時的兩種方式
- iOS中實現簡單易懂秒殺倒計時/倒計時代碼
- iOS中讓多個cell上都出現倒計時的分析與實現
- iOS實現毫秒倒計時的方法詳解
- iOS啟動頁倒計時跳過按鈕功能
- Swift實現iOS應用中短信驗證碼倒計時功能的實例分享
- iOS實現秒殺活動倒計時
相關文章
IOS網絡請求之AFNetWorking 3.x 使用詳情
本篇文章主要介紹了IOS網絡請求之AFNetWorking 3.x 使用詳情,小編覺得挺不錯的,現在分享給大家,也給大家做個參考。一起跟隨小編過來看看吧2017-02-02Swift 進階 —— map 和 flatMap的使用
這篇文章主要介紹了Swift map和flatMap的相關資料,幫助大家更好的理解和使用Swift,感興趣的朋友可以了解下2020-09-09IOS開發基礎之二維數組詳解
這篇文章主要介紹了IOS開發基礎之二維數組詳解的相關資料,需要的朋友可以參考下2017-04-04iOS App中數據管理框架Core Data的基本數據操作教程
Core Data框架能夠?yàn)槲覀兲峁┍炔僮鱏QL關系型數據庫更簡單的數據管理方式,而且內置于Xcode中配合IDE操作十分方便,下面我們就來看一下iOS App中數據管理框架Core Data的基本數據操作教程2016-06-06iOS開發中使用屏幕旋轉功能的相關方法
這篇文章主要介紹了iOS開發中使用屏幕旋轉功能的相關方法,包括Transform變化矩陣原理的講解,需要的朋友可以參考下2015-09-09iOS內存管理中引用計數的學習
文章給大家分享了關于iOS內存管理中引用計數的相關知識點,對此有需要的朋友可以跟著學習下。2018-05-05