CentOS 7下編譯安裝Nginx 1.11.10教程

更新時間：2017年03月15日 09:38:21 作者：不爭

這篇文章主要介紹了在CentOS 7下編譯安裝Nginx 1.11.10的方法，文中給出了詳細的安裝步驟，相信對大家具有一定的參考價值，需要的朋友們下面來一起看看吧。

前言

之前分享過一篇 CentOS下編譯安裝nginx及配置縮略圖插件的方法教程，當時的環境是 CentOS 6.x 和 Nginx 1.9.x 。本次安裝的環境為 CentOS 7.2 和 Nginx 1.11.10, 有些配置以前自啟動的方式發生了變化，這里再記錄一下。

安裝編譯安裝依賴的類庫和包

yum install gcc gcc-c++ autoconf automake zlib zlib-devel openssl openssl-devel pcre-devel

下載和解壓 Nginx 1.11.10

wget http://nginx.org/download/nginx-1.11.10.tar.gz
tar -xzvf nginx-1.11.10.tar.gz
cd nginx-1.11.10

配置 Nginx 安裝選項

這里編譯了插件 http_image_filter_module, 來實現圖片的處理，采用默認的安裝路徑進行安裝。

./configure\
 --with-http_ssl_module\
 --with-http_v2_module\
 --with-http_realip_module\
 --with-http_addition_module\
 --with-http_xslt_module\
 --with-http_image_filter_module\
 --with-http_sub_module\
 --with-http_auth_request_module\
 --with-http_stub_status_module\
 --with-http_gzip_static_module

運行結果如下

[root@xx nginx-1.11.10]# ./configure\
> --with-http_ssl_module\
> --with-http_v2_module\
> --with-http_realip_module\
> --with-http_addition_module\
> --with-http_xslt_module\
> --with-http_image_filter_module\
> --with-http_sub_module\
> --with-http_auth_request_module\
> --with-http_stub_status_module\
> --with-http_gzip_static_module
checking for OS
 + Linux 3.10.0-327.22.2.el7.x86_64 x86_64
checking for C compiler ... found
 + using GNU C compiler
 + gcc version: 4.8.5 20150623 (Red Hat 4.8.5-11) (GCC) 
checking for gcc -pipe switch ... found
checking for -Wl,-E switch ... found
checking for gcc builtin atomic operations ... found
checking for C99 variadic macros ... found
checking for gcc variadic macros ... found
checking for gcc builtin 64 bit byteswap ... found
checking for unistd.h ... found
checking for inttypes.h ... found
checking for limits.h ... found
checking for sys/filio.h ... not found
checking for sys/param.h ... found
checking for sys/mount.h ... found
checking for sys/statvfs.h ... found
checking for crypt.h ... found
checking for Linux specific features
checking for epoll ... found
checking for EPOLLRDHUP ... found
checking for EPOLLEXCLUSIVE ... not found
checking for O_PATH ... found
checking for sendfile() ... found
checking for sendfile64() ... found
checking for sys/prctl.h ... found
checking for prctl(PR_SET_DUMPABLE) ... found
checking for sched_setaffinity() ... found
checking for crypt_r() ... found
checking for sys/vfs.h ... found
checking for poll() ... found
checking for /dev/poll ... not found
checking for kqueue ... not found
checking for crypt() ... not found
checking for crypt() in libcrypt ... found
checking for F_READAHEAD ... not found
checking for posix_fadvise() ... found
checking for O_DIRECT ... found
checking for F_NOCACHE ... not found
checking for directio() ... not found
checking for statfs() ... found
checking for statvfs() ... found
checking for dlopen() ... not found
checking for dlopen() in libdl ... found
checking for sched_yield() ... found
checking for SO_SETFIB ... not found
checking for SO_REUSEPORT ... found
checking for SO_ACCEPTFILTER ... not found
checking for SO_BINDANY ... not found
checking for IP_BIND_ADDRESS_NO_PORT ... not found
checking for IP_TRANSPARENT ... found
checking for IP_BINDANY ... not found
checking for IP_RECVDSTADDR ... not found
checking for IP_PKTINFO ... found
checking for IPV6_RECVPKTINFO ... found
checking for TCP_DEFER_ACCEPT ... found
checking for TCP_KEEPIDLE ... found
checking for TCP_FASTOPEN ... found
checking for TCP_INFO ... found
checking for accept4() ... found
checking for eventfd() ... found
checking for int size ... 4 bytes
checking for long size ... 8 bytes
checking for long long size ... 8 bytes
checking for void * size ... 8 bytes
checking for uint32_t ... found
checking for uint64_t ... found
checking for sig_atomic_t ... found
checking for sig_atomic_t size ... 4 bytes
checking for socklen_t ... found
checking for in_addr_t ... found
checking for in_port_t ... found
checking for rlim_t ... found
checking for uintptr_t ... uintptr_t found
checking for system byte ordering ... little endian
checking for size_t size ... 8 bytes
checking for off_t size ... 8 bytes
checking for time_t size ... 8 bytes
checking for AF_INET6 ... found
checking for setproctitle() ... not found
checking for pread() ... found
checking for pwrite() ... found
checking for pwritev() ... found
checking for sys_nerr ... found
checking for localtime_r() ... found
checking for posix_memalign() ... found
checking for memalign() ... found
checking for mmap(MAP_ANON|MAP_SHARED) ... found
checking for mmap("/dev/zero", MAP_SHARED) ... found
checking for System V shared memory ... found
checking for POSIX semaphores ... not found
checking for POSIX semaphores in libpthread ... found
checking for struct msghdr.msg_control ... found
checking for ioctl(FIONBIO) ... found
checking for struct tm.tm_gmtoff ... found
checking for struct dirent.d_namlen ... not found
checking for struct dirent.d_type ... found
checking for sysconf(_SC_NPROCESSORS_ONLN) ... found
checking for openat(), fstatat() ... found
checking for getaddrinfo() ... found
checking for PCRE library ... found
checking for PCRE JIT support ... found
checking for OpenSSL library ... found
checking for zlib library ... found
checking for libxslt ... found
checking for libexslt ... found
checking for GD library ... found
checking for GD WebP support ... not found
creating objs/Makefile
Configuration summary
 + using system PCRE library
 + using system OpenSSL library
 + using system zlib library
 nginx path prefix: "/usr/local/nginx"
 nginx binary file: "/usr/local/nginx/sbin/nginx"
 nginx modules path: "/usr/local/nginx/modules"
 nginx configuration prefix: "/usr/local/nginx/conf"
 nginx configuration file: "/usr/local/nginx/conf/nginx.conf"
 nginx pid file: "/usr/local/nginx/logs/nginx.pid"
 nginx error log file: "/usr/local/nginx/logs/error.log"
 nginx http access log file: "/usr/local/nginx/logs/access.log"
 nginx http client request body temporary files: "client_body_temp"
 nginx http proxy temporary files: "proxy_temp"
 nginx http fastcgi temporary files: "fastcgi_temp"
 nginx http uwsgi temporary files: "uwsgi_temp"
 nginx http scgi temporary files: "scgi_temp"

最后的幾行是配置的結果，注意這里的 pid file 那一行，后面配置服務的時候，需要用的到。

安裝 Nginx

使用如下命令來安裝 nginx 。

make && make install

配置 systemd Nginx 服務和設置 Nginx 自啟動

centos 7 中采用 systemd 來管理系統，我們來為 nginx 創建服務文件，來實現通過 systemd 來管理 nginx 。

創建 systemd 服務文件： /lib/systemd/system/nginx.service，內容如下：

[Unit]
Description=The NGINX HTTP and reverse proxy server
After=syslog.target network.target remote-fs.target nss-lookup.target
[Service]
Type=forking
PIDFile=/usr/local/nginx/logs/nginx.pid
ExecStartPre=/usr/local/nginx/sbin/nginx -t
ExecStart=/usr/local/nginx/sbin/nginx
ExecReload=/bin/kill -s HUP $MAINPID
ExecStop=/bin/kill -s QUIT $MAINPID
PrivateTmp=true
[Install]
WantedBy=multi-user.target

這里的 PIDFile 的配置要和前面的配置保持一致。

設置自啟動

systemctl enable nginx

通過 systemd 管理 nginx

systemctl start nginx
systemctl stop nginx
systemctl restart nginx
systemctl reload nginx

總結

好了，打完收工。以上就是這篇文章的全部內容了，希望本文的內容對大家的學習或者工作能帶來一定的幫助，如果有疑問大家可以留言交流，謝謝大家對腳本之家的支持。

您可能感興趣的文章:

Nginx中的用戶認證配置及阻止用戶使用代理訪問的方法
這篇文章主要介紹了Nginx中的用戶認證配置及阻止用戶使用代理訪問的方法,用戶認證部分用到了自帶的ngx_http_auth_basic_module模塊,需要的朋友可以參考下
2016-01-01
nginx cache不緩存問題的原因與解決方案
最近在工作中遇到了一個問題，發現nginx cache居然不緩存，后來通過查找網上的資料找到了原因和解決方案，下面整理好分享給大家，同樣遇到這個問題的朋友們可以參考借鑒，下面和小編一起來學習學習吧。
2016-10-10
Nginx反向代理多域名的HTTP和HTTPS服務的實現
這篇文章主要介紹了Nginx反向代理多域名的HTTP和HTTPS服務的實現，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧
2020-06-06
nginx簡單配置多個server的方法
這篇文章主要介紹了nginx簡單配置多個server的方法，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧
2020-11-11
nginx靜態資源的服務器配置方法
Nginx本身也是一個靜態資源的服務器，當只有靜態資源的時候，就可以使用Nginx來做服務器，同時現在也很流行動靜分離，就可以通過Nginx來實現，這篇文章主要介紹了nginx靜態資源的服務器配置方法,需要的朋友可以參考下
2022-07-07
很詳細的Nginx配置說明
這篇文章主要為大家分享了一篇很詳細的Nginx配置說明，主要內容包括Nginx常用功能、Nginx配置文件結構，想要了解Nginx配置的朋友不要錯過，參考一下
2016-02-02
Nginx的location路徑與proxy_pass匹配規則說明
這篇文章主要介紹了Nginx的location路徑與proxy_pass匹配規則說明,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教
2024-06-06
Nginx訪問日志切割的3種實現方法
這篇文章主要給大家介紹了關于Nginx訪問日志切割的3種實現方法,隨著訪問量的增長,日志文件會越來越大,時間長既會影響訪問的速度,也會占用一部分磁盤空間,這時候就需要日志切割了,需要的朋友可以參考下
2023-08-08
詳解Nginx反向代理跨域基本配置與常見誤區
這篇文章主要介紹了詳解Nginx反向代理跨域基本配置與常見誤區,小編覺得挺不錯的，現在分享給大家，也給大家做個參考。一起跟隨小編過來看看吧
2018-08-08
Mac上搭建nginx+rtmp直播服務器的步驟詳解
最近的直播很火，所以這篇文章跟大家分享了在Mac上搭建nginx+rtmp直播服務器的步驟，文章通過一步步圖文介紹的很詳細，有需要的朋友們可以參考借鑒。
2016-09-09