JAVA中讀取文件(二進制,字符)內容的幾種方法總結
JAVA中讀取文件內容的方法有很多,比如按字節讀取文件內容,按字符讀取文件內容,按行讀取文件內容,隨機讀取文件內容等方法,本文就以上方法的具體實現給出代碼,需要的可以直接復制使用
public class ReadFromFile { /** * 以字節為單位讀取文件,常用于讀二進制文件,如圖片、聲音、影像等文件。 */ public static void readFileByBytes(String fileName) { File file = new File(fileName); InputStream in = null; try { System.out.println("以字節為單位讀取文件內容,一次讀一個字節:"); // 一次讀一個字節 in = new FileInputStream(file); int tempbyte; while ((tempbyte = in.read()) != -1) { System.out.write(tempbyte); } in.close(); } catch (IOException e) { e.printStackTrace(); return; } try { System.out.println("以字節為單位讀取文件內容,一次讀多個字節:"); // 一次讀多個字節 byte[] tempbytes = new byte[100]; int byteread = 0; in = new FileInputStream(fileName); ReadFromFile.showAvailableBytes(in); // 讀入多個字節到字節數組中,byteread為一次讀入的字節數 while ((byteread = in.read(tempbytes)) != -1) { System.out.write(tempbytes, 0, byteread); } } catch (Exception e1) { e1.printStackTrace(); } finally { if (in != null) { try { in.close(); } catch (IOException e1) { } } } } /** * 以字符為單位讀取文件,常用于讀文本,數字等類型的文件 */ public static void readFileByChars(String fileName) { File file = new File(fileName); Reader reader = null; try { System.out.println("以字符為單位讀取文件內容,一次讀一個字節:"); // 一次讀一個字符 reader = new InputStreamReader(new FileInputStream(file)); int tempchar; while ((tempchar = reader.read()) != -1) { // 對于windows下,\r\n這兩個字符在一起時,表示一個換行。 // 但如果這兩個字符分開顯示時,會換兩次行。 // 因此,屏蔽掉\r,或者屏蔽\n。否則,將會多出很多空行。 if (((char) tempchar) != '\r') { System.out.print((char) tempchar); } } reader.close(); } catch (Exception e) { e.printStackTrace(); } try { System.out.println("以字符為單位讀取文件內容,一次讀多個字節:"); // 一次讀多個字符 char[] tempchars = new char[30]; int charread = 0; reader = new InputStreamReader(new FileInputStream(fileName)); // 讀入多個字符到字符數組中,charread為一次讀取字符數 while ((charread = reader.read(tempchars)) != -1) { // 同樣屏蔽掉\r不顯示 if ((charread == tempchars.length) && (tempchars[tempchars.length - 1] != '\r')) { System.out.print(tempchars); } else { for (int i = 0; i < charread; i++) { if (tempchars[i] == '\r') { continue; } else { System.out.print(tempchars[i]); } } } } } catch (Exception e1) { e1.printStackTrace(); } finally { if (reader != null) { try { reader.close(); } catch (IOException e1) { } } } } /** * 以行為單位讀取文件,常用于讀面向行的格式化文件 */ public static void readFileByLines(String fileName) { File file = new File(fileName); BufferedReader reader = null; try { System.out.println("以行為單位讀取文件內容,一次讀一整行:"); reader = new BufferedReader(new FileReader(file)); String tempString = null; int line = 1; // 一次讀入一行,直到讀入null為文件結束 while ((tempString = reader.readLine()) != null) { // 顯示行號 System.out.println("line " + line + ": " + tempString); line++; } reader.close(); } catch (IOException e) { e.printStackTrace(); } finally { if (reader != null) { try { reader.close(); } catch (IOException e1) { } } } } /** * 隨機讀取文件內容 */ public static void readFileByRandomAccess(String fileName) { RandomAccessFile randomFile = null; try { System.out.println("隨機讀取一段文件內容:"); // 打開一個隨機訪問文件流,按只讀方式 randomFile = new RandomAccessFile(fileName, "r"); // 文件長度,字節數 long fileLength = randomFile.length(); // 讀文件的起始位置 int beginIndex = (fileLength > 4) ? 4 : 0; // 將讀文件的開始位置移到beginIndex位置。 randomFile.seek(beginIndex); byte[] bytes = new byte[10]; int byteread = 0; // 一次讀10個字節,如果文件內容不足10個字節,則讀剩下的字節。 // 將一次讀取的字節數賦給byteread while ((byteread = randomFile.read(bytes)) != -1) { System.out.write(bytes, 0, byteread); } } catch (IOException e) { e.printStackTrace(); } finally { if (randomFile != null) { try { randomFile.close(); } catch (IOException e1) { } } } } /** * 顯示輸入流中還剩的字節數 */ private static void showAvailableBytes(InputStream in) { try { System.out.println("當前字節輸入流中的字節數為:" + in.available()); } catch (IOException e) { e.printStackTrace(); } } public static void main(String[] args) { String fileName = "C:/temp/newTemp.txt"; ReadFromFile.readFileByBytes(fileName); ReadFromFile.readFileByChars(fileName); ReadFromFile.readFileByLines(fileName); ReadFromFile.readFileByRandomAccess(fileName); } }
以上就是本文的全部?jī)?nèi)容,希望對大家的學習有所幫助,也希望大家多多支持腳本之家。
相關文章
SpringBoot+Mybatis實現登錄注冊的示例代碼
這篇文章主要介紹了SpringBoot+Mybatis實現登錄注冊的示例代碼,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2021-03-03使用restTemplate遠程調controller路徑取數據
這篇文章主要介紹了使用restTemplate遠程調controller路徑取數據,具有很好的參考價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教2021-08-08淺談SpringBoot項目如何讓前端開發提高效率(小技巧)
這篇文章主要介紹了淺談SpringBoot項目如何讓前端開發提高效率(小技巧),主要介紹了Swagger和Nginx提高效率的方法,具有一定的參考價值,感興趣的小伙伴們可以參考一下2019-04-04SpringBoot使用Maven打包異常-引入外部jar的問題及解決方案
這篇文章主要介紹了SpringBoot使用Maven打包異常-引入外部jar,需要的朋友可以參考下2020-06-06Security中的WebSecurityConfigurerAdapter詳解
這篇文章主要介紹了Security中的WebSecurityConfigurerAdapter詳解,今天我們要進一步的的學習如何自定義配置Spring?Security,本文結合實例代碼給大家介紹的非常詳細,需要的朋友可以參考下2023-07-07Java源碼解析重寫鎖的設計結構和細節
這篇文章主要為大家介紹了Java源碼解析重寫鎖的設計結構和細節,這小節我們以共享鎖作為案列,自定義一個共享鎖。有需要的朋友可以借鑒參考下2022-03-03你應該知道的21個Java核心技術
Java的21個核心技術點,你知道嗎?這篇文章主要為大家詳細介紹了Java核心技術,具有一定的參考價值,感興趣的小伙伴們可以參考一下2017-08-08Java實現遞歸查詢樹結構的示例代碼
我們?cè)趯?shí)際開發中,肯定會用到樹結構,如部門樹、菜單樹等等。Java后臺利用遞歸思路進行構建樹形結構數據,返回給前端,能以下拉菜單等形式進行展示。今天,咱們就來說說怎么樣將List集合轉換成TreeList2022-11-11