Android自定義viewgroup快速滑動(4)
上一篇文章自定義viewgroup(3)地址:http://chabaoo.cn/article/100618.htm
代碼:
package com.example.libingyuan.horizontallistview.ScrollViewGroup; import android.content.Context; import android.util.AttributeSet; import android.util.DisplayMetrics; import android.view.MotionEvent; import android.view.VelocityTracker; import android.view.View; import android.view.ViewConfiguration; import android.view.ViewGroup; import android.view.WindowManager; import android.widget.Scroller; /** * 自定義ViewGroup * 增加了加速度滑動 */ public class ScrollViewGroup extends ViewGroup { //滾動計算輔助類 private Scroller mScroller; //手指落點的X坐標 private float mLastMotionX = 0; //屏幕寬度 private int screenWidth; //手指加速度輔助類 private VelocityTracker mVelocityTracker; //每秒移動的最小dp private int mMinimumVelocity; //每秒移動的最大dp private int mMaximumVelocity; /** * 使用new關鍵字創建對象的時候調用 * * @param context 上下文 */ public ScrollViewGroup(Context context) { this(context, null); } /** * 在XML文件中使用的時候調用 * * @param context 上下文 * @param attrs 屬性:如 android:layout_width="wrap_content" */ public ScrollViewGroup(Context context, AttributeSet attrs) { this(context, attrs, 0); } /** * 在xml文件中調用,并且使用了自定義屬性的時候調用 * * @param context 上下文 * @param attrs 屬性:如 android:layout_width="wrap_content" * @param defStyleAttr 自定義屬性的id */ public ScrollViewGroup(Context context, AttributeSet attrs, int defStyleAttr) { super(context, attrs, defStyleAttr); init(context); } /** * 初始化方法 * 初始化滾動輔助類Scroller以及計算出屏幕寬度 * * @param context 上下文 */ private void init(Context context) { //初始化輔助類 mScroller = new Scroller(context); //獲取屏幕寬度 WindowManager manager = (WindowManager) context .getSystemService(Context.WINDOW_SERVICE); DisplayMetrics outMetrics = new DisplayMetrics(); manager.getDefaultDisplay().getMetrics(outMetrics); screenWidth = outMetrics.widthPixels; //獲取最小和最大的移動距離 final ViewConfiguration configuration = ViewConfiguration.get(context); mMinimumVelocity = configuration.getScaledMinimumFlingVelocity(); mMaximumVelocity = configuration.getScaledMaximumFlingVelocity(); } /** * 滾動時需要重寫的方法,用于控制滾動 */ @Override public void computeScroll() { //判斷滾動時候停止 if (mScroller.computeScrollOffset()) { //滾動到指定的位置 scrollTo(mScroller.getCurrX(), mScroller.getCurrY()); //這句話必須寫,否則不能實時刷新 postInvalidate(); } } /** * 手指觸屏事件監聽 */ @Override public boolean onTouchEvent(MotionEvent event) { // TODO Auto-generated method stub int action = event.getAction(); //獲取現在手指所在的位置的x坐標 float x = event.getX(); //判斷觸發的時間 switch (action) { //按下事件 case MotionEvent.ACTION_DOWN: //初始化或服用加速度測試器 initOrResetVelocityTracker(); //測試器添加按下事件 mVelocityTracker.addMovement(event); //如果停止?jié)L動則取消動畫(即手指按下就停止?jié)L動) if (!mScroller.isFinished()) { mScroller.abortAnimation(); } //獲取現在的x坐標 mLastMotionX = event.getX(); break; //移動事件 case MotionEvent.ACTION_MOVE: //測試器添加移動事件 if (mVelocityTracker != null) { mVelocityTracker.addMovement(event); } //計算移動的偏移量 float delt = mLastMotionX - x; //重置手指位置 mLastMotionX = x; //滾動 scrollBy((int) delt, 0); break; //手指抬起事件 case MotionEvent.ACTION_UP: //測試器添加抬起事件 mVelocityTracker.addMovement(event); //添加加速度的測試時間,這里是測量1000毫秒內的加速度 mVelocityTracker.computeCurrentVelocity(1000, mMaximumVelocity); //獲取x方向加速度 float pxsec = mVelocityTracker.getXVelocity(); //得到最后一個子View View lastChild = getChildAt(getChildCount() - 1); //獲取滑動的最大滑動距離(最后一個Child的右邊框的坐標減去屏幕的寬度) int finalyChild = (int) (lastChild.getX() + lastChild.getWidth() - screenWidth); //如果x的加速度大于系統設定的最小移動距離,就可以慣性滑動 if (Math.abs(pxsec) > mMinimumVelocity) mScroller.fling(getScrollX(), 0, (int) -pxsec, 0, 0, finalyChild, 0, 0); //如果滑動的距離小于第一個控件的最左邊(0)則回彈至(0,0)點 if (getScrollX() < 0) { scrollTo(0, 0); } //如果滑動的距離大于最大可滑動距離則滑動到最后一個子View if (getScrollX() >= finalyChild) scrollTo(finalyChild, 0); //刷新界面 invalidate(); //清空測試器 recycleVelocityTracker(); break; default: break; } return true; } /** * 創建或復用加速度測試器 */ private void initOrResetVelocityTracker() { if (mVelocityTracker == null) { mVelocityTracker = VelocityTracker.obtain(); } else { mVelocityTracker.clear(); } } /** * 回收加速度測試器,防止內存泄漏 */ private void recycleVelocityTracker() { if (mVelocityTracker != null) { mVelocityTracker.recycle(); mVelocityTracker = null; } } @Override protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) { //重新設置寬高 this.setMeasuredDimension(measureWidth(widthMeasureSpec, heightMeasureSpec), measureHeight(widthMeasureSpec, heightMeasureSpec)); } /** * 測量寬度 */ private int measureWidth(int widthMeasureSpec, int heightMeasureSpec) { // 寬度 int sizeWidth = MeasureSpec.getSize(widthMeasureSpec); int modeWidth = MeasureSpec.getMode(widthMeasureSpec); //父控件的寬(wrap_content) int width = 0; int childCount = getChildCount(); //重新測量子view的寬度,以及最大高度 for (int i = 0; i < childCount; i++) { View child = getChildAt(i); measureChild(child, widthMeasureSpec, heightMeasureSpec); MarginLayoutParams lp = (MarginLayoutParams) child.getLayoutParams(); int childWidth = child.getMeasuredWidth() + lp.leftMargin + lp.rightMargin; width += childWidth; } return modeWidth == MeasureSpec.EXACTLY ? sizeWidth : width; } /** * 測量高度 */ private int measureHeight(int widthMeasureSpec, int heightMeasureSpec) { //高度 int sizeHeight = MeasureSpec.getSize(heightMeasureSpec); int modeHeight = MeasureSpec.getMode(heightMeasureSpec); //父控件的高(wrap_content) int height = 0; int childCount = getChildCount(); //重新測量子view的寬度,以及最大高度 for (int i = 0; i < childCount; i++) { View child = getChildAt(i); measureChild(child, widthMeasureSpec, heightMeasureSpec); MarginLayoutParams lp = (MarginLayoutParams) child.getLayoutParams(); int childHeight = child.getMeasuredHeight() + lp.topMargin + lp.bottomMargin; height += childHeight; } height = height / childCount; return modeHeight == MeasureSpec.EXACTLY ? sizeHeight : height; } /** * 給子布局設定位置 */ @Override protected void onLayout(boolean changed, int l, int t, int r, int b) { int childLeft = 0;//子View左邊的間距 int childWidth;//子View的寬度 int height = getHeight();//屏幕的寬度 int childCount = getChildCount();//子View的數量 for (int i = 0; i < childCount; i++) { View child = getChildAt(i); MarginLayoutParams lp = (MarginLayoutParams) child.getLayoutParams(); childWidth = child.getMeasuredWidth() + lp.leftMargin + lp.rightMargin; child.layout(childLeft, 0, childLeft + childWidth, height); childLeft += childWidth; } } @Override public LayoutParams generateLayoutParams(AttributeSet attrs) { return new MarginLayoutParams(getContext(), attrs); } }
以上就是本文的全部?jī)?nèi)容,希望對大家的學習有所幫助,也希望大家多多支持腳本之家。
- Android繼承ViewGroup實現Scroll滑動效果的方法示例
- Android中實現可滑動的Tab的3種方式
- Android中實現監聽ScrollView滑動事件
- android中使用Activity實現監聽手指上下左右滑動
- android 通過向viewpage中添加listview來完成滑動效果(類似于qq滑動界面)
- Android中實現水平滑動(橫向滑動)ListView示例
- 解析Android中實現滑動翻頁之ViewFlipper的使用詳解
- android開發教程之實現滑動關閉fragment示例
- Android利用ViewPager實現滑動廣告板實例源碼
- Android自定義ViewGroup實現彈性滑動效果
相關文章
Android基于Toolbar實現頂部標題欄及后退鍵
這篇文章主要介紹了Android基于Toolbar實現頂部標題欄及后退鍵,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2020-09-09Android Retrofit2網路編程實現方法詳解
這篇文章主要介紹了Android Retrofit2網路編程實現方法詳解,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2020-12-12Android編程之簡單啟動畫面實現方法
這篇文章主要介紹了Android編程之簡單啟動畫面實現方法,結合實例形式較為詳細的分析了開機啟動畫面的制作步驟及布局、Activity跳轉、權限控制等的相關操作技巧,需要的朋友可以參考下2016-11-11Android之用PopupWindow實現彈出菜單的方法詳解
本篇文章是對在Android中,用PopupWindow實現彈出菜單的方法進行了詳細的分析介紹,需要的朋友參考下2013-06-06解析android中隱藏與顯示軟鍵盤及不自動彈出鍵盤的實現方法
本篇文章對android中隱藏與顯示軟鍵盤以及不自動彈出鍵盤的方法進行了分析介紹。需要的朋友參考下2013-05-05Android開發實現從相冊中選擇照片功能詳解
這篇文章主要介紹了Android開發實現從相冊中選擇照片功能,涉及Android權限控制、事件綁定、文件路徑與獲取等相關操作技巧,需要的朋友可以參考下2019-03-03A07_TimePicker & DatePicker & AnalogClock & Digi
本文將帶領大家一起學習時間日期和時鐘的設置。A07_TimePicker & DatePicker & AnalogClock & DigitalClock 的設置,感興趣的朋友可以參考下哈2013-06-06Kotlin 匿名類實現接口和抽象類的區別詳解
這篇文章主要介紹了Kotlin 匿名類實現接口和抽象類的區別詳解,具有很好的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧2020-03-03